Gems pressure transducer and transmitter Flow Sensors Fluid Level Sensors Control Switches
FS-600 - No-Moving-Parts Flow Switch
Piston Type Flow Switches
Shuttle Type Flow Switches
Paddle Type Flow Switches
RotorFlow Sensors
TurboFlow® Turbine Flow Sensor
Flow Switches
FT-110 Series ¨C TurboFlowEconomical Flow-Rate Sensors Low Cost Plus High Accuracy !à3% of Readin Measures Low Liquid Flow Rates of .1 to 8 GPM Lightweight Plastic Design Enables Mounting in any Position Gems Hall Effect turbine low rate sensor is ideal for OEM applications involving low flow liquid monitoring.
Low Flow Rates .1 to 2.5 LPM and High Accuracy !à3% of Readin Lightweight Turbine Ensures Fast Startup Mounts In Any Orientation Gems FT-210 features proven turbine technology in a small package for low flow applications. The turbine technology provides a highly repeatable sensor ideally suited for measurement of either volume dispensing and/or low rate applications. The small turbine reacts quickly to on/off dispensing applications. Each sensor is 100% tested, ensuring years of service life.
High Accuracy: !à2% of readin High repeatability: !à0.5% of readin Overmolded electronics with integral cable strain reinforcement Measures low rates from .2 to 4 GPM Lightweight plastic design for multiple mounting positions The FT-330 is a highly accurate and repeatable, Hall Effect turbine low sensor designed for low low OEM applications. This low cost, NSF Std. 61 listed low sensor is ideal for water or beverage dispensing applications or any application with water based liquids. The 316SS shaft coupled with Delrin bearings allows for accurate measurements during quick dispensing cycles.
FS-600 Series ¨C No Moving Part, Thermal Dispersion Flow Switch Flow Rate Settings: 0.1 GPM to 11 GPM (0.5 LPM to 41 LPM) Port Size: 1/2 to 1-1/2 (NPT or G thread) Setting Type: Fixed The FS-600 series uses proven thermal dispersion technology to provide a robust no moving part low switch even without iltration.
For Flow/No-Flow Detection in Large Line Sizes Engineered for positive liquid flow detection at pressures upto 2000psig (138 bar) Unique, patented cam design assures low pressure drop and does not require bellows, seals, or mechanical linkages Minimum in-line restriction; paddle pivots to move out of liquid path
For Low Flow Rates in Liquids and Gases Models for liquid flow rates as low as 50 cc/min. and gas flow rates as low as 2 SCFH. Small, compact housings with port sizes from 1/4" NPT Precision built for superior accuracy Applications: Protect your expensive electronic equipment from coolant flow failure on: Laser Heads • Welders • Power Supplies • High Speed Spindles • X-Ray Tubes • Semiconductor Equipment Assure proper lubrication flow to critical bearings or gears to prevent system downtime on: Presses • Rotating Equipment • Conveyors • Machine Tools • Robotics Ensure system integrity in processing and dispensing equipment on: Water Purification and Filtering • Beverage Dispensing • Chemical Additives • Gas Sampling • Distilling Part Number Flow Setting Body Material Port Size Switch TypeSPST, N.O. = Normally Open dry (GPM) SPST, N.C. = Normally Closed dry SPDT = Single-pole Double Throw 168433 0.5 Brass 3/8" NPT Male SPST, N.O.
Gems' line of flow switches features a broad range of configurations for use in liquids or gases. These switches feature high quality, corrosion-resistant materials for use in the toughest environments. Versions include switches with fixed or adjustable actuation settings, models for viscosity compensaton or high pressures, in-line models and designs to satisfy any mounting or space requirement. Model FS-4 Primary Material of Construction Plastic Sensor Type Piston Type Adjustable Range N/A Flow Setting(GPM) 0.10 Body Material Ryton Port Size 9/16"-18 UNF-2B Switch Type SPST, N.O. (20VA) Set Point Accuracy ±15% Maximum Pressure(PSI) 150 - 300 Maximum Temperature 225 Electrical Termination 18 AWG, Zipcord, 24" long Set Point Differential 20% Wetted Materials Ryton, 316 Stainless Steel, Viton, Epoxy Approvals UL Recognized, CSA Listed, CE Recommended Filtration 50 micron
Sensor Type RotorFlow Low Flow Range(GPM) 0.1 - 1.0 Standard Flow Range(GPM) 0.5 - 5.0 Flow Range(GPM) 0.1-5.0 Body Material Brass Port Size 1/4" NPT Female Maximum Pressure(PSI) 200 Minimum Temperature(°F) -20 Maximum Temperature(°F) 212 Wetted Materials Brass, Ceramic, PPS Composite, Polysulfone, Viton (Low Flow Adapter - Polyproylene) Approvals UL Recognized, CE, CUL Recognized Recommended Filtration 150 micron Minimum Qty (per Release) 1 Weight(LBS) 0.9735 Part Number Flow Range Description Body Material Port Size (GPM) 142541 0.1-5.0 Low flow ranges require use of Low Flow Adapter (provided). Brass 1/4" NPT Female 142542 1.5-20.0 Low flow ranges require use of Low Flow Adapter (provided).
60. Gems Continuous Level Transmitters CT-1000 Potentiometric Sensor Continuous XT-1000 Magnetostrictive Level Transmitter
Gems float type liquid level transmitters provide reliable and durable remote tank gauging. A wide variety of material combinations make them compatible with most liquid media. The XM & XT-800 Series provide solutions for most small to mid-size tanks, for deeper tanks look to the 36000 and 66000.
For challenging fluids such as ultra-pure, dirty, coating, scaling and corrosive types, Gems offers the UCL-510 and UCL-520 ultrasonic liquid level transmitters. Our UCL series are easy to install and do not come in contact with the liquid. The UCL-520 is push button the calibrated, the UCL-510 is supplied with configuration software for flexible system integration or retrofit of existing level devices.
For applications requiring an extremely high level of accuracy Gems new CT-1000 potentiometric level transmitter offers no-moving parts sensing of conductive liquids. The XT-1000 magnetostrictive liquid level transmitter provides temperature compensated measurement on a variety of liquid media.
Completely electronic, Gems™ Liquid Level Transmitters provide reliable and durable remote tank gauging. A wide variety of material combinations provide compatibility for most liquid media. Gems XM- & XT-800 Series provide solutions for most small to mid-size tanks in both process and OEM applications; for deeper tanks (to 18 feet) look to the Gems 36000 and 66000 Series.
UCL-510 Ultrasonic Continuous Level Sensor UCL-520 Ultrasonic Continuous Level Sensor To 26-Feet (7.92 m) Range 2" NPT Mounting Setup is Fast and Easy 6-Segment LCD Display Accurate and reliable sensing method Ideal technology for difficult fluids Sized and priced for most applications Easy to install-- simple to use Gems™ delivers the answer for challenging fluid measurement and monitoring with our new ultrasonic UCL Series continuous non-contact level transmitters.
Gems Fluid Level Sensors & Control Switches CVD Sensing Pressure Transducer 1200/1600 Series， 2200/2600 Series， 6700 Series，
C-700 Series Low Level Cut Off Control Internal Mounting Meets CSD1 Requirements U.L. Recognized "Limit Control" Compact Size Options Include: Manual Reset, Power Outage Feature, and Test Feature LWC-720 Series Low Level Cut Off with Pump Control Internal Mounting Includes Pump Control Switch, Logic and Relay Meets CSD1 Requirements U.L. Recognized "Limit Control" Compact Size Options Include: Manual Reset, Power Outage Feature, and Test Feature LWC-800 Series Low Level Cut Off Control External Mounting Meets CSD1 Requirements U.L.
Series M-Mechanical Tilt Float Level Switch Non-Mercury Switch Sealed Cable Impact & Corrosion Resistant ABS Shell N.O., N.C., SPDT Contacts Various Cable Lengths Color Coded Body. Designed for level control and alarm applications in dificult liquids such as sewage and waste water. Series M mechanical tilt loats are ideal for applications where the presence of mercury is a concern.
Warrick Control Panels Warrick Alarm Panels Kits and Options Series CP Control Panel Standard Level Control System Electrical Panel Model CP16 Supply Voltage 120 VAC Panel Function Simplex Pump Down Control Sensitivity 50 K Mode of Operation Inverse Enclosure NEMA 4X Alarm Options Audible/Visual Contacts Contact Design SPST Contact Rating 10 Amp Minimum Temperature(°F) -40
Gems Multi-Point Float Level Switches
LWC-720 Series Low Level Cut Off with Pump Control
LS-350 Series Multi-Point Level Switch
LS-300TFE Series Multi-Point Level Switch
LS-300 Series Multi-Point Level Switch
LS-700 Series Multi-Point Level Switch
LS-700 Series Multi-Point Level Switch
TheUCL-510offersaninnovative,noncontactultrasoniclevelsensorwithnomovingpartsbuiltforchallengingfluidmeasurement.Thisaccurateandreliablesensorisbuiltforgeneralpurpose,smalltankapplications49.2"(1250mm)orlessandoffersswitch,controllerandtransmittercapabilitiesinonemulti-functiontransmitter.TheUCL-510issuitedforcorrosiveanddirtyapplicationsandisvirtuallymaintenancefreeandreducestanksystemhardware.TheUCL-510combines4relays,4-20mAoutputandpump valvecontrolinonesmallsensor.TheUCL-510offersatotalsolutionforfluidhandlingandautomation.
Digital Bargraph Display Receivers -163000 Series Gems Digital Bargraph Receivers improve the way you are able to visualize the data being received from your liquid level transmitters. These new receivers display liquid level information in digital numerals in conjunction with a 0-100% LED bargraph readout.
Gems Single Point Capacitive Level Switches CAP-100 Series Single Point Electro-Optic Level Switches LS-3 Series ExOsense Non-Intrusive Liquid Level Sensor Float Switches LS-1700 Series Water in Fuel Level Indicator (WIF-1250)
Digital Bargraph Display Receivers -163000 Series Gems Digital Bargraph Receivers improve the way you are able to visualize the data being received from your liquid level transmitters. These new receivers display liquid level information in digital numerals in conjunction with a 0-100% LED bargraph readout.
Easy to Adjust and Calibrate Compact and Low Cost Plainly Visible Readout These compact, low-cost Level Cubes provide accurate, continuous 3-digit readout of liquid level. The indicating range and decimal point location on the display are quickly and easily selectable with the readout plainly visible. Gems™ Receivers house a numerical digital readout, and all of the calibration adjustments for a complete Continuous Level indication system. Those receivers designed for the XM-Series transmitters also include a power supply for the transmitter.
DIPTAPE Indicators ¨C Alloy Version Temperatures to 300!aF (148!a Pressures to 750 PSI (52 bar) Rugged brass or stainless steel units are ideal for use in water and oils. Select these units for best temperature and pressure capabilities.
All-PVC Versions Are Economical for Light Duty Temperatures to 140!aF (60!a Pressures to 15 PSI (1 bar) Max. Ideal for chemical storage tanks, our all-PVC DIPTAPE Indicators provide one of your best values for liquid level monitoring.
The DM28 meter line is available in 5 different models. Applications: Medical Laboratory Food and Beverage Systems Pharmaceuticals Petrochemicals Leak Detection Hydraulic Reservoirs
High Performance Versions ¨C Standard Size Designed to meet the requirements of ASME B31.1/B31.3* Temperatures to 750!aF (399!a Pressures to 4200 PSI (290 bar) For your most demanding applications, these SureSite Indicators feature ANSI langes and ittings and construction to rigorous ASME standards. You can!ˉt specify a better visual level indicator
Lengths over 20ft (6.09 m) 316 Stainless Steel Housing Pressures up to 400psi (27 bar) Temperatures up to 400°F (204°C) Alloy Versions¨CMiniature SizLengths to over 20 feet (6.1 meters)316 Stainless Steel constructionPressures to 400 PSI (27 bar) ¨C Temperature to 400!aF (204!
Temperatures up to 280°F (139°C) Pressures up to 150psi (10 bar) Up to 20ft (6.09 m) of Continuous Visual Indication The 2” (51 mm) Schedule 40 pipe design is ideal for use on chemical storage tanks, or with almost any liquid where temperature and pressure requirements are moderate.
Temperatures up to 750°F (399°C) Pressures up to 700psi (48 bar) Standard Alloy Versions ¨C Standard SizTemperatures to 750!aF (399!aPressures to 700 PSI (48 bar) Rugged, welded construction makes these 2-1/2? (63.5 mm) diameter design, alloy SureSite Indicators dependable over a long service life indoors and out. 1. Mounting Coniguration Types To choose the best coniguration for your application, focus on the process connections (connections where the liquid typically enters/leaves the SureSite). 2. Material (62) Housing and Float: 316 Stainless Steel Pressure/Temperature performance parameters for alloy SureSite versions are speciied in the chart at right. Please consult the factory with temperature/pressure 600 requirements that fall outside the parameters shown here.
Other supplier products
供应产品
Same products
