SIEMENS pressure transmitter Innovative flow measurement building on strong tradition
The SITRANS F family of flow measurement products has a well-established reputation for reliability in day-to-day applications. These trusted flow meter products range from simple flow indicators to highly developed bus-compatible electronic flow measurement units. SITRANS F offers the right flow meter for every application, medium and industry and is a perfect solution for measuring liquids, gas and steam.
Electromagnetic, Coriolis, Ultrasonic, Vortex, Variable Area, Rotary Piston, Differential Pressure, Product Variation Request - PVR
Pointek CLS100 is a compact 2-wire inverse frequency shift capacitance switch for level detection in constricted spaces, interfaces, solids, liquids, slurries and foam.
Pointek CLS100’s short insertion length of 100 mm (4") and versatility in various applications and in vessels or pipes makes it a good replacement for traditional capacitance sensors.
Pointek CLS200 is a versatile inverse frequency shift capacitance level switch with optional rod/cable choices and configurable output, ideal for detection of liquids, solids, slurries, foam and interfaces. The digital version (with PROFIBUS PA) includes a display and provides additional diagnostic features.
Pointek CLS300 is an inverse frequency shift capacitance level switch with optional rod/cable choices and configurable output. It is ideal for detecting liquids, solids, slurries, foam and interfaces in demanding conditions where high pressure and temperatures are present.
Pointek CLS500 is an inverse frequency shift capacitance level switch for detecting interfaces, solids, liquids, toxic and aggressive chemicals in critical conditions of high temperature and pressure. Patented Active-Shield technology ensures that measurement is unaffected by vapours, product deposits, dust and condensation.
Definition of PVR Siemensoffers you the possibility to customize your product. We call these applications for Product Variation Requests (PVR). A PVR is an application for a product which is not defined within theorder structure and is therefore not a selectable option within the PIA Life Cycle Portal either.
The SITRANS P MPS series pressure transmitter converts the level-proportional hydrostatic pressure into a standardized signal 4 to 20 mA. The transmitter consists of a stainless steel housing (Ø 27 mm) with mechanical protection IP 68, a piezzo-resistive sensor with stainless steel diaphragm and Φ 8.3 mm 2-wire sheathed cable with a built-in 2 air vents and a Kevlar cord vital for longer cable support.
The SITRANS P Compact is an analog transmitter for measuring absolute and relative pressure which has been developed specially for the requirements of the food/pharmaceutical and biotechnology industries.
The SITRANS P500 has been developed to meet the highest expectations for measuring accuracy, ruggedness, and user-friendliness, and it merges seamlessly into the SITRANS P family. With the SITRANS P500, you can expect pressure measurement at the highest level.
The SITRANS P MPS series pressure transmitter converts the level-proportional hydrostatic pressure into a standardized signal 4 to 20 mA.
The SITRANS transmitters P200, P210 and P220 are compact single-range-transmitters for measurement of absolute and gauge pressure. In this series we use two different kinds of pressure sensors: two stainless steel sensors and one ceramics sensor. So the measurement of process pressure, absolute pressure and hydrostatic pressure is an easy thing.
The SITRANS P250 is a compact single range transmitter for measuring differential pressure. The differential pressure will be detected with a ceramics sensor and tranformed into an output signal of 4–20-mA- resp. 0-5-V- resp. 0–10-V. The version with 0-10 V output signal can be connected directly to the LOGO!24 process controller.
The SITRANS P280 is a WirelessHART pressure transmitter that provides all measured process values as well as diagnostic information, parameters and functions via radio.
The SITRANS P500 has been developed to meet the highest expectations for measuring accuracy, ruggedness, and user-friendliness, and it merges seamlessly into the SITRANS P family. With the SITRANS P500, you can expect pressure measurement at the highest level.
The SITRANS P500 has been developed to meet the highest expectations for measuring accuracy, ruggedness, and user-friendliness, and it merges seamlessly into the SITRANS P family. With the SITRANS P500, you can expect pressure measurement at the highest level.
SIPART PS2 is currently the most widely used positioner for linear and part-turn actuators in a wide range of process industries. This is not without reason. The proven all-round design has a particularly flexible stroke range, intelligent diagnostics, and communicates either via HART, PROFIBUS PA or Foundation Fieldbus. What has been proven so often is certainly the correct choice.
The SITRANS F M MAG 5000 is a microprocessor-based transmitter engineered for high performance, easy installation, commissioning and maintenance. The transmitter is truly robust, cost-effective and suitable for all-round applications and has a measuring accuracy of ± 0.4% of the flow rate (incl. sensor).
In order to have a complete flowmeter, please combine it with one of the following MAG sensors:
SITRANS F M MAG 1100: Small sizes and wafer design
SITRANS F M MAG 1100 F: Food and pharma applications
SITRANS F M MAG 5100 W: Water applications
SITRANS F M MAG 3100: Chemical and process applications
SITRANS F M MAG 3100 P: Comprehensive product program
The transmitter can be combined with the energy calculator SITRANS FUE950
With SIFLOW FC070 Siemens has developed the first flow transmitter designed for direct integration into SIMATIC S7 and SIMATIC PCS7 automation systems. SIFLOW FC070 is a true multiparameter Coriolis mass flow transmitter covering the full repertoire within flow applications and industries, ready for quick installation and system integration. SIFLOW FC070 is suitable for any application in automated industries where there is a demand for accurate flow measurement.The SIFLOW FC070 Ex CT is custody transfer approved for high pressure natural gas used in CNG dispencers.
In order to make a complete flowmeter, the SIFLOW FC070 transmitter can be combined with one of the following MASS sensors
SITRANS F C MASS 2100 DI 1.5: For low flow applications
SITRANS FC300 DN 4: For low flow applications
SITRANS F C MASS 2100 DI 3-40: Mass flow measurement for general industry
SITRANS F C MC2: Suitable for Food & Beverage applications
SITRANS FCS200: For measurement of gases.
The SITRANS F C MASS 6000 is based on the latest developments within digital signal processing technology – engineered for high performance, fast flow step response, fast batching applications, high immunity against process noise, easy to install, commission and maintain.
The SITRANS F CMASS 6000 transmitter delivers true multi parameter measurements i.e. mass flow, volume flow, density, temperature and fraction.
SITRANS F C MASS 2100 DI 3-40: Mass flow measurement for general industry
SITRANS F C MASS 2100 DI 1.5: For low flow applications
SITRANS F C MC2: Suitable for Food & beverage applications
SITRANS FC300 DN 4: For low flow applications
The SITRANS F C MASS 6000 Ex d is based on the latest developments within digital signal processing technology – engineered for high performance, fast flow step response, fast batching applications, high immunity against process noise, easy to install, commission and maintain. The transmitter is manufactured in stainless steel (AISI 316L) and able to withstand harsh installation conditions in hazardous application within the process and chemical industry.
In order to make a complete flowmeter, the SITRANS F C MASS 6000 flow transmitter must be combined with one of the following MASS sensors:
SITRANS F C MASS 2100 DI 3-40: Mass flow measurement for general industry
SITRANS F C MASS 2100 1.5: For low flow applications
SITRANS FC300: For low flow applications
Based on patented digital signal processing technology, the SITRANS FCT030 transmitter delivers true multi-parameter measurements with enhanced efficiency, security and simplicity. It features a modular design for convenient installation and replacement, and can be remote or compact mounted with all SITRANS FCS400 sensor sizes.
The high-powered flowmeter consists of the SITRANS F M TRANSMAG 2 transmitter and the sensor SITRANS F M 911/E being the best choice for special applications such as pulsating flow, media with low conductivity and high percentage of solids.
The SITRANS F M MAG 6000 is a microprocessor-based transmitter engineered for high performance, easy installation, commissioning and maintenance. The transmitter is robust and suitable for all-round applications, has a measuring accuracy of
± 0.2% of the flow rate and can be fitted with optional plug-in communication modules.
In order to have a complete flowmeter, please combine it with one of the following MAG sensors:
SITRANS F M MAG 1100: Small sizes and wafer design
SITRANS F M MAG 1100 F:Food and pharma applications
SITRANS F M MAG 5100 W: Water applications
SITRANS F M MAG 3100: Comprehensive product program
SITRANS F M MAG 3100 P: Chemical and process applications
The transmitter can be combined with the energy calculator SITRANS FUE950
The SITRANS F M MAG 6000 I and the SITRANS F M MAG 6000 I Ex de transmitters have an measuring accuracy of + 0.2% of the flow rate and are designed to meet the demands of the process industry. Both versions are based on a microprocessor with a built-in alphanumeric display.In order to have a complete flowmeter, please combine it with one of the following MAG sensors:
SITRANS F M MAG 1100: Small sizes and wafer design
SITRANS F M MAG 1100 F: Food and pharma applications
SITRANS F M MAG 5100 W: Water applications
SITRANS F M MAG 3100: Comprehensive product program
SITRANS F M MAG 3100 P: Chemical and process applications
SITRANS TF is made of rugged die cast aluminum or long-lasting stainless steel. It transforms resistance thermometers, thermocouples, Ohm and mV signals into a load independent DC current corresponding to sensor characteristic or a digital signal according Fieldbus standard Profibus PA or Foundation Fieldbus. The remote mounted sensor prevents the transmitter heating up at high temperature; there are no vibrations and oscillations due to long neck tubes and protective pipes with SITRANS TF.
The SITRANS TF280 is a WirelessHART temperature transmitter that provides all measured process values as well as diagnostic information, parameters and functions via radio. The device is powered by an internal battery and designed for ultra low power consumption. Its compact and rugged design makes it specially suitable for direct mounting on tanks and pipes in remote parts of plants, and on moving or rotating equipment for process monitoring or asset management applications.
Detail
Input Pt100 (IEC 60751)
Output WirelessHART radio in 2.4 GHz
SITRANS TH100 is rigid designed for economic use. For example with saving of the galvanic insulation, which is not need for PT100. Therefore the TH100 offers economic plant operation and reliable measurements. It is an ideal substitute for over aged analogue PT100 transmitters. Setup is quick and easy with the transmitter-modem and SIPROM T. This configuration tool can be downloaded for free.
SITRANS TH200 is designed to support all common RTDs, thermocouples, resistance and millivolt-sensors. Setup is quick and easy with the transmitter-modem and SIPROM T software. This configuration tool can be downloaded free.
SITRANS TH300 with HART- protocol is designed to support all common thermocouples, resistance and millivolt sensors.
SITRANS TH400 is available either with PROFIBUS PA or FOUNDATION Fieldbus (FF). It is designed to support all common RTD, thermocouple, resistance and millivolt sensors. Setup is quick and easy with SIMATIC PDM(PA) or AMS and handheld communicator(FF).
SITRANS TR200 is designed to support all common RTDs, thermocouples, resistance and Millivolt sensors. Setup is quick and easy with the transmitter-modem and SIPROM T software. This configuration tool can be downloaded free.
SITRANS TR300 with HART- protocol is designed to support all commons, thermocouples, resistance and Millivolt sensors.
SITRANS TW is a consistent further development of the hundred thousand times proven SITRANS T for the 4wire system in the mounting rail housing. Its many new functions set new standards in temperature transmitters. Its diagnostic and simulation functions provide the necessary clarity during commissioning and operation.
Delivery of complete tags for all applications Our wish is to meet your measuring point and sensor requirements, irrespective of the industry or application.
This temperature sensor line for sanitary applications provides a wide range of appropriate process connections for the classical temperature measurement. With the clamp-on temperature sensor Siemens breaks new ground. The benefits are particularly at small pipe diameters are the removal of welding and welding validation no disturbance of the process. Comparable accuracy and response time, despite piggability and simple demounting for recalibration.
SITRANS TW is a consistent further development of the hundred thousand times proven SITRANS T for the 4wire system in the mounting rail housing.
Delivery of complete tags for all applications Our wish is to meet your measuring point and sensor requirements, irrespective of the industry or application.
This temperature sensor line for sanitary applications provides a wide range of appropriate process connections for the classical temperature measurement.
The TS Insert is used as a spare part for the SITRANS TS500 or as component to build up complete temperature assemblies. Deliverable in European design with ceramic terminal bloc, flying leads or mounted transmitter or in American design, build up spring-loaded in the extension.
The temperature sensor line is delivered with direct connected cable. With its construction based on mineral insulated cable (MIC) supports a wide range of applications. Due to compression fittings or soldering nipples the installation is simple and flexible.
The temperature sensor line is equipped with direct mount connectors (M12, Lemo usw.). With its construction based on mineral insulated cable (MIC) supports a wide range of applications. Due to compession fittings or soldering nipples the installation is simple and flexible.
SIEMENS temperature measurement Temperature Sensors SITRANS TS200
SIEMENS temperature measurement Temperature Sensors SITRANS TS500
Other supplier products
供应产品
Same products
