Kaneko 4-way solenoid valve (SINGLE) -M15G SERIES
Feature
Internal sliding parts extremely slippery by the hard-anodized, stick-slip has excellent abrasion resistance in operation can not operate even without lubrication.
The main parts are made of aluminum alloy, has become very small and light.
You can be easily replaced AC, DC coil is designed so that both fit into the same casing.
Corrosion treatment has been applied in a very strong hard anodized corrosion resistant.
Flameproof is a test of the Ministry of acceptable product.
Main valve is not malfunction due to spring for actuation by a piston, without the need for a spring, also be left for a long period of time and therefore will operate off balance spool type.
With buttons for manual, you can check or test operation.
Minimum operating pressure is 0.1MPa operate reliably in because there is no Earosu.
You can also be used as a three-way valve to select the port in the form of port 5.
Standard specification
FLUID
CLEAN AIR
FLUID TEMPERATURE
-20 ～ 60℃
AMBIENT TEMPERATURE
-20 ～ 60℃
DUTY CYCLE
100% CONTINUOUSLY RATED
OPERATING VOLTAGE RANGE
+10，-15％
WORKING PRESSURE
0.1 ～ 0.99MPa
Cv. FLOW FACTOR
0.87
STANDARD VOLTAGE
See below
STANDARD VOLTAGE
|
AC |
DC |
|||
|
V/Hz |
INRUSH A |
HOLDING A |
V |
A |
|
100/50 |
0.27 |
0.16 |
24 |
0.33 |
|
100/60 |
0.25 |
0.13 |
48 |
0.15 |
|
110/60 |
0.25 |
0.15 |
100 |
0.072 |
|
200/50 |
0.14 |
0.08 |
110 |
0.08 |
|
200/60 |
0.13 |
0.07 |
125 |
0.06 |
|
220/60 |
0.13 |
0.08 |
||
Product Image
M15G GENERAL PURPOSE TYPE
|
M15G-8～10 GENERAL PURPOSE TYPE |
||
|
NOMINAL DIAMETER |
MOUNTING LENGTH |
H |
|
8 |
60 |
123 |
|
10 |
60 |
123 |
M15G EXPLOSION-PROOF TYPE
|
M15G-8～10 EXPLOSION-PROOF TYPE |
||
|
NOMINAL DIAMETER |
MOUNTING LENGTH |
H |
|
8 |
60 |
138 |
|
10 |
60 |
138 |
M15G HYDROGEN EXPLOSION-PROOF TYPE
|
M15G-8～10 HYDROGEN EXPLOSION-PROOF TYPE |
||
|
NOMINAL DIAMETER |
MOUNTING LENGTH |
H |
|
8 |
60 |
156 |
|
10 |
60 |
156 |
M15G DUST EXPLOSION-PROOF TYPE
|
M15G-8～10 DUST EXPLOSION-PROOF TYPE |
||
|
NOMINAL DIAMETER |
MOUNTING LENGTH |
H |
|
8 |
60 |
190 |
|
10 |
60 |
190 |
DESCRIPTION OF OPERATION
在线联系供应商
Other supplier products
 |
ABB pressure transmitter deltapi N series | The Deltapi N series pneumatic transmitters provides a standard output pressure signal from a variety of inputs: flow, pressure, differential press... |
 |
Kaneko 4-way solenoid valve (DOUBLE)-M65DG SERIES | Feature Wide range of applications. Can be used for a wider range of applications because valve sizes... |
 |
Buschjost Pressure actuated valves by external fluid Norgren solenoid valve Series 82160 82260 | Buschjost Pressure actuated valves by external fluid Norgren solenoid valve Series 82180 82190 82280 82290Buschjost Pressure actuated valves by ext... |
 |
Kaneko air-operated valve - BZ10G SERIES | Feature Being air-operated, the valves can be used with assurance in places inaccessible to power sour... |
 |
Hunter solenoid valve Accu-Sync series AS-ADJ,AS-20,AS-30,AS-40,AS-50,AS-70 | Hunter is committed to manufacturing top quality products that use only the water and energy needed to get the job done efficiently.Hunter solenoid... |
Same products
 |
Low-E Braided Packing, Flexible Graphite, Fiberglass, Custom | 卖方: Magpie Valve Packing Gasket Co., Ltd | The Low Emission Braided Packing Manufacturer delivers high-performance flexible graphite valve p... |
 |
fused AZS block | 卖方: 内蒙古亿升新材料有限公司 | 窑坎 AZS-33系列产品抗玻璃液侵蚀能力强，发泡和结石倾向低。广泛应用于与玻璃液接触部位，如熔化池池壁、铺底和上部结构，如熔化池胸墙、小炉、挂钩砖等。 典型应用 ●池壁 ●上部结构 ●... |
 |
fused AZS block | 卖方: 内蒙古亿升新材料有限公司 | 流道 AZS-33系列产品抗玻璃液侵蚀能力强，发泡和结石倾向低。广泛应用于与玻璃液接触部位，如熔化池池壁、铺底和上部结构，如熔化池胸墙、小炉、挂钩砖等。 典型应用 ●池壁 ●上部结构 ●... |
 |
fused AZS block | 卖方: 内蒙古亿升新材料有限公司 | 观察孔 AZS-33系列产品抗玻璃液侵蚀能力强，发泡和结石倾向低。广泛应用于与玻璃液接触部位，如熔化池池壁、铺底和上部结构，如熔化池胸墙、小炉、挂钩砖等。 典型应用 ●池壁 ●上部结构 ... |
 |
电熔锆刚玉砖 | 卖方: 内蒙古亿升新材料有限公司 | AZS-33 AZS-33系列产品抗玻璃液侵蚀能力强，发泡和结石倾向低。广泛应用于与玻璃液接触部位，如熔化池池壁、铺底和上部结构，如熔化池胸墙、小炉、挂钩砖等。 典型应用 ●池壁 ●上部... |
