GDJ-5S Rotational Viscometer
I. Summary
The instrument is designed and made according to the requirement of the T0625 “Asphalt Brookfield Rotation Viscosity Test (Brookfield Viscometer Method)” in the Industry Standard of People’s Republic of China JTJ052 Specifications and Test Methods of Bitumen and Bituminous Mixtures for Highway Engineering. It is suitable to determine the absolute viscosity of the Newtonian liquids and the apparent viscosity of the non-Newtonian liquids.
The instrument adopts the advanced mechanical design technology, manufacturing techniques and microcomputer technology for temperature control, data collection, and data processing. It takes a white background light, ultra bright LCD screen as display screen. The instrument also equips a pin type micro-printer for data output. The measurement data can be shown on the display screen in real time and printed out through the printer. In addition, the instrument can connect to the PC through the RS232 communication interface.
The instrument has the characteristics of high measurement sensitivity, reliable results and delicate shape, as well as convenience to be operated. It can be widely used to determine the viscosity of various liquids such as asphalt, hot sol, paraffin, high polymer and so on.
II. Main technical specifications and parameters
1. Measurement range: 25 mPa·s～1×107 mPa·s ( If choosing the No.30 spindle, the measurement range can extend to 2×107 mPa·s)
2. Spindle: No. 21, 27, 28, 29 total four types of spindles (the No.30 is optional)
3. Spindle speed: 0.1～200 RPM, continuously speed regulation (With 12 grades of speed)
4. Measurement error: ±2% (F·S), choosing the No.30 spindle, it will be ±3% (F·S)
5. Temperature control range: 25 ℃～200 ℃
6. Temperature control accuracy: ±0.1 ℃
7. Sample cylinder cubage: 20 ml
8. Power supply: AC 220 V±10%, 50 Hz
9. Ambient temperature: 5 ℃～35 ℃ (when the control temperature of the heater is close to the ambient temperature, turn on the air conditioner to allow the ambient temperature is approximately 5 ℃ lower than the control temperature of the heater);
10. Relative humidity: ≤80%
在线联系供应商
Other supplier products
 |
GD-0615 Wax Content Tester | Summary This instrument is designed and made as per standardsT 0615-2011 Wax Content Test for Bitumen by distillation in JTG E20-2011 Specification... |
 |
GDJ-1F Brookfield Viscometer | I. Summary The instrument is designed and made according to the requirement of the T0625 “Asphalt Brookfield Rotation Viscosity Test (Brookf... |
 |
GDE-1A Engler Viscometer | Summary This instrument is designed and made as per national standardGB/T266 Petroleum Products-Determination of Engler viscosityand Shanghai enter... |
 |
GD-265H Automatic Petroleum Oils Kinematic Viscometer | Introduction: » GD-265H ASTM D445 Automatic Kinematic Viscosity Apparatusis designed and made as per the industry standard of People’... |
 |
GDGS Good Quality Tan Delta Test Set for Power Transformers | 1PowerFactor Testerapplication GDGS automatic tangent delta tester is applied to measure the dielectric loss and capacitor value of insulation mate... |
Same products
 |
iX361 中框校正夹 | 卖方: 深圳维客修有限公司 | Fixes iCF6/iA3/iX16/iX361手机屏幕中框维修治具。iFixes iCF6免加热开屏器用于手机液晶拆解无需加热。iFixes iX361中框矫正维修平台。iFixes IA3... |
 |
单相电表测试仪 | 卖方: 782364 | GF112D是一种单相手持式电子电表测试装置，精度等级为0.05、0.1或0.2，用于现场测试单相电表误差。测量范围从1mA到120A, 0到600V，也可用于测试交流参数—&mda... |
|
|
单相电表测试仪 | 卖方: 782364 | GF112D是一种单相手持式电子电表测试装置，精度等级为0.05、0.1或0.2，用于现场测试单相电表误差。测量范围从1mA到120A, 0到600V，也可用于测试交流参数—&mda... |
|
|
单相电表测试仪 | 卖方: 782364 | GF112D是一种单相手持式电子电表测试装置，精度等级为0.05、0.1或0.2，用于现场测试单相电表误差。测量范围从1mA到120A, 0到600V，也可用于测试交流参数—&mda... |
 |
数字轨距 | 卖方: Wuhan linkage track equipment co.,ltd | 产品描述 数显轨头磨损仪主要用于测量钢轨的垂直磨损和横向磨损，设计合理，重量轻，操作方便，读数直观。 特征 1.数字直读式：LCD显示屏，清晰易读;无需计算，直接读数;读数时，按住... |
