Safety Glass Impact Test Machine
Impact Testing Equipment
Testing Machine for Mechanical Properties of Tempered Glass
Shot Bag
1)Weight:45kg±0.1kg 46kg±0.1kg
2)Height: 330mm± 13mm
3)Max diameter:250mm
4)Lead sand size: 2.5mm
Pneumatic Tyres Impactor
Pneumatic Tyres Device for Pendulum Test of Glass In Building According to BS EN 12600
Reference standard:
BS EN 12600:2002
Glass in building - Pendulum test - Impact test method and classification for flat glass
MS 1498:2017
Safety glass in building - Specification
Technical Parameters:
Weight 50 kg ± 0.1 kg
Tire pressure: 0.35Mpa ± 0.02Mpa
Type: 3.50-R8 4PR
Impact Frame
Test Frame:
Frame Size: 1900mm*1500mm*3570mm
Samples Size: 1930mm*864mm
Lift: Electric
Release: Auto
Maximum impact height: 1200mm (customized)
Rubber Pad Width: 15mm
Rubber Pad Thickness: 3mm
Rubber Pad Hardness: Shore A50
Drop Ball Impact Test Machine
Determination of whether the safety glazing material has a certain minimum strength and cohesion under impact from a small hard object
Hardness steel ball:
a) 2260g ± 20g, diameter of approximately 82.5mm
b) 227g ± 2g, diameter of approximately 38 mm
c) 1040g ± 10g, diameter of approximately 63.5 mm
d) 508g±3g, diameter of approximately 50 mm
Frame Height: 1000mm, 5000mm, 12000mm, Customized
Automatic release and lift. Power: 220V 50Hz 580W
Supporting fixture:
a) Support Size: 350mm*350mmand 660mm*660mm (Customized)
b) Frame width 15mm
c) Steel box height 150mm
d) Rubber Gasket: thickness 3mm, width 15mm, hardness shore A50
e) Interposed sheet of rubber: thickness 3mm, hardness shore A50
Applied Test Pieces Size: 300mm*300mm 610mm* 610mm
Head-form Test Device
Head Weight: 10kg Head Size: 500mm*932mm Impact height: < 1.5m Samples size: 1100mm*500mm Felt hat: 90g/89mm/3mm Frame size: 1400mm*666mm*320mm
Safety Glass testing Equipment:
Portable on-site Comprehensive Measurement Instrument for Energy-saving Glass
It is applicable to the field test for opt thermal parameters of energy-saving glass installed and or to be installed
The data that the instrument can measure is: thermal parameters, optical parameters, light transmittance, light reflectance, shading coefficient, U value, LSG, Low-E position, E value, space thickness, overall thickness, glass thickness
The types of glass that the instrument can measure are:
Single pane, Laminated glass, Uncoated insulated glass, Coating on both sides and below, Coating on more than two sides, Coating on both sides and below, Coating on more than two sides, Vacuum glazing
Pummel Test Device:
Hammer head diameter: 30mm
Impact Distance: Adjustable
Shot Bag Impact Testing Frame:
Shot Bag 45kg/46kg
Automatic Release
Electric Lifting
Pneumatic Clamping
PV Load Test Equipment
Size: 6425mm*2000mm*3490mm
Samples: 1643mm*991mm~2009mm*1027mm (Customized)
Source: Sandbag
Load: 2400Pa 5400Pa 8100Pa 10000Pa (Customized)
Pneumatic Tyres Device
Weight 50 kg ± 0.1 kg
Tire pressure: 0.35Mpa ± 0.02Mpa
Type: 3.50-R8 4PR
Forced Entry Resistant Glass Test Device
Axe: 810mm Long
Axe Quality: 1.80kg
Sample size: 610mm*610mm
Insulating Glass Dew Point Meter
Operating temperature: -80°C ~ 100°C
Tube height: 300mm
Tube diameter: 50mm
Temperature resolution: 0.1 °C
Hard/Soft Pendulum Shock Test for Lifts
Hard pendulum shock device
Height: 330± 15mm
Max diameter: 240±10mm
Weight: 10kg ± 0.1kg
Material: according to ISO standard
Filler: 3.5mm 0.25mm
Soft pendulum shock device
Height: 330mm ± 15mm
Maximum diameter: 240mm±15mm
Weight: 45kg ± 0.5kg
Material: leather bag
Filler: diameter 3.5mm ± 1mm lead sand
Boiling Test Device
Power: 220V 50Hz 3Kw (Customized)
Outside Size: 400mm*255mm*480mm
Inside Size: 400mm*255mm*480mm
At most 6 samples with 300mm*300mm
Tempered Glass Flatness Measuring Instrument
Measurement of arcuate form and wave form of toughened glass
Resolution: 0.01mm
Measuring Span: 300mm-12000 mm ( Customized)
Impactor for building Glass and Metal Guardrail
Impact Steel ball
Weight: 1040g ± 10g
Dia: 63mm
Shot bag impactor
Data:
Weight: 45kg ± 0.1kg
Height: 330mm ± 13mm
Max diameter: 250mm
Material: leather bag filling lead shot
Leather thickness: 0.15mm
Lead sand size: 2.5mm
Hard and Soft Body Impactors for Opaque Wall Components
Soft body:
Weight: 50kg
Dia: 400mm
Conical canvas bag filles with 3mm glass sphere
Hard Body:
Steel Ball 0.5 kg/50mm
Steel Ball 1 kg/62.5mm
在线联系供应商
Other supplier products
 |
Metal S Hook Hanger S Shaped | 隧道电缆挂架 冲压折弯件 钣金折弯件 材料：碳钢板 长度：680mm 宽度：50mm 厚度：5mm 用途：用于煤矿井下供电电缆悬挂和保护的冷冲压电缆挂钩，矿用金属电缆挂钩矿井里面捆挂各种电缆，异常牢固，通讯电缆电缆挂钩产品介绍：采用热轧扁钢用冲压模具加工而成右以悬挂电缆的装置，根据客户要求加... |
 |
Valve Gasket/Metal Gasket/Carbon Steel Gasket Processing/Carbon Steel Cutting Parts | Valve gasketMetal gasketCarbon steel gasket processingCarbon steel cutting partsMaterial: carbon steelThickness: 5mmOuter diameter: 117mmInner diam... |
 |
Pummel Machine For Adhesion | Function:Pummel test equipment for detect the adhesion of the interlayer of the laminated glass. Technical Data:Hammer head diameter: 30mmImpact D... |
 |
Glass and alzing Products testing Machine | Impact Testing Equipment Testing Machine for Mechanical Properties of Tempered Glass Shot Bag 1)Weight:45kg±0.1kg 46kg±0.1kg 2)Heigh... |
 |
Ball Drop Test Apparatus Impact Testing Machine | Function: Determination of whether the safety glazing material has a certain minimum strength and cohesion under impact from a small hard object Su... |
Same products
 |
UV Detector | 卖方: 淮安市鑫盛制药设备有限公司 | The ultraviolet-visible dual-wavelength detector features high sensitivity and a wide linear rang... |
 |
Fabric ici pilling and snagging box | 卖方: 标准集团 | Fabric ici pilling and snagging boxis composed of the same speed motor drive, and to maintain the... |
 |
Martindale Abrasion And Pilling Tester | 卖方: 标准集团 | To determine the abrasion and pilling resistance of all kinds of textile structures. Samples are ... |
 |
Circular Locus Pilling Tester | 卖方: 标准集团 | Testing Standards: GB/T 4802.1. JIG 040-1990 Product Information: The Circular Locus Pilling... |
 |
Bean Bag Snag Tester | 卖方: 标准集团 | Bean Bag Snag Tester, to determine the snagging and picking resistance of knitted and woven fabri... |
