Tungsten Tube

Tungsten tube, namely pure tungsten tube, is one of the main pure tungsten products. The purity of tungsten tube produced from medium tungsten can reach more than 99.95%. Because the production process is different, the density will be different. The density can reach 18.2g/cm3 if the product is only sintered and 19.2g/cm3 if it is fully forged. But if the size is large, such as 100mm diameter, even after forging, can not reach 19.2g/cm3, the density can be achieved is about 18.8g/cm3.

Specification of Tungsten Tube

Grade	Tungsten content		Content of impurity elements
			Total content		Each content
W1	≥99.95%		≤0.05%		≤0.01%
W2	≥99.92%		≤0.08%		≤0.01%
WAL1,WAL2	≥99.95%		≤0.05%		≤0.01%
Diameter (mm)		Wall thickness (mm)		Length (mm)
30-50		2–10		<600
50-100		3–15
100-150		3–15
150-200		5–20
200-300		8–20
300-400		8–30
400-450		8–30
450-500		8–30



Application of Tungsten Tube

Tungsten PIPE is mainly used in thermocouple protection tube in high temperature furnace, sapphire single crystal furnace, high temperature sintering furnace support parts and so on.

Production Process of Tungsten Tube

Tungsten tube production using powder metallurgy, after the blank, sintering, forging, polishing, inspection packaging can be shipped. China's production standard is GB/T 4187-1984, now generally can reach the American standard ASTM F288-90.

Features of Tungsten Tube

Tungsten tube has quite high purity, generally purity above 99.95%;

Its density is more than 18.2g/cm3;

Recommended operating temperature should be less than 2500℃;

At 1600℃, the coefficient of thermal expansion is 4.98x10-6;

The specific heat capacity at 1400℃ is 0.16J/ g. ℃.

Tungsten tube contamination is low.

There are many tungsten tubing supplier, but we are one of the best choices for you.

For more informationabout types of refractory metals, please feel free to contact us!

Other supplier products

	Niobium Tube	Niobium and niobium alloy tubes, rods and wires are widely used in chemistry, electronics, aviation and aerospace because of their high melting poi...
	Molybdenum Scrap	Revivification of Molybdenum refers to a process in which Molybdenum is obtained from waste materials including waste catalysts, Molybdenum compoun...
	Tantalum Sheet	Tantalum sheet metalis tantalum tungsten alloy plate, tantalum platebright, no cracks, no peeling, no folding, no obvious oxidation, impurities pre...
	Molybdenum Scrap	Revivification of moly scraprefers to a process in which Molybdenum is obtained from waste materials including waste catalysts, Molybdenum compound...
	Tungsten Metal Bar	Pure tungsten baris made of 99.95% tungsten powder. Its physical properties are as follows: density 19.3g/cm3, melting point (liquid) 3422°C, c...

供应产品

Same products

	Chain Link Fence	卖方: Hebei Shineyond Metal Products Co.,Ltd	Also known as diamond wire mesh, sloping square mesh. Hooked wire mesh is made by crocheting, its...
	Torsion Spring Clip	卖方: ningbo atlas metal hardware co ltd	Torsion Spring Clip We manufacture close tolerance parts with complex geometries, intricate deta...
	Torsion Spring	卖方: ningbo atlas metal hardware co ltd	Torsion Spring A torsion springis a spring that works by twisting its end along its axis; that i...
	Threaded Parts	卖方: ningbo atlas metal hardware co ltd	Threaded Parts We have rich experience in machining stainless steel, Titanium alloy, aluminium, ...
	Tension Spring	卖方: ningbo atlas metal hardware co ltd	Adjustable Tension Spring Tension springs are wound helical coils that are wrapped tightly toget...