Installation Standard for W Beam Guardrail
Before the highway guardrail installation, the construction preparation shall be made, the detailed construction scheme shall be determined, and the data of various facilities shall be accurately mastered, especially the exact location of various pipelines embedded in the subgrade. During the construction process, any damage to underground facilities is not allowed.
The control points shall be bridges, culverts, channels, three-dimensional intersection, the opening of the separation belt and the hole, and the positioning and lofting of the column shall be carried out in advance. If the roadside guardrail is not fully installed, the setting position of roadside wave guardrail shall be rechecked according to the setting principle of roadside wave guardrail given in the design and the implementation of the main project, and it shall be adjusted appropriately according to the actual situation.
Construction and installation tools of w beam guardrail include: pile driver, excavation tool, tamping tool, pliers, hammer and theodolite, level gauge, tape measure and other measuring tools.
Specification for W beam guardrail installation:
(1) The column installation shall be carried out strictly in accordance with the design drawings and coordinated with the road alignment.
(2) The columns shall be firmly embedded in the soil to reach the design depth and be perpendicular to the road surface.
(3) For general road sections, the column is driven into the road with accurate positioning during construction. When driving too deep, it is not allowed to pull out the part of the column for correction, it is necessary to pull out all of them, and then drive again after the foundation is compacted.
(4) When the driving method cannot be used for construction, the excavation method shall be adopted to bury the column, and the embedded guardrail column foundation shall be C25 concrete foundation. When the column is installed, the backfill shall be made of good materials and compacted layer by layer (the thickness of each layer shall not exceed 15 cm), and the compactness of the backfill shall not be less than the adjacent undisturbed soil. The column pit in the rock shall be backfilled with granular material and compacted.
As aprofessional china steel pipe suppliers,we providegalvanized well pipe,galvanized corrugated guardrail, highway guardrail for sale, china steel guardrailand etc. Want to know types of water supply pipesor more? Contact us.
在线联系供应商
Other supplier products
 |
Scaffolding Pipe | As a reliable wholesale scaffold pipe specifications supplier, Tianchuang has good quality scaffolding pipe for sale to meet our customers' needs. ... |
 |
Construction Pipe | The steel pipes for construction (building pipes) can be divided into seamless steel pipes and seamed steel pipes according to seamless seams. Spir... |
 |
Fire Fighting Pipe | Fire fighting pipe is a kind of normal carbon steel pipe for conveying water, gas and other fire suppression agents. It's usually in red. But the e... |
 |
BS1387 Steel Pipe | Know More about BS 1387 Pipe BS 1387: 1985 has been withdrawn and replaced by the European standard EN 10255:2004 (implemented by UK national stand... |
 |
EN 10255 Steel Pipe | China's commonly used EU steel pipe standards are EN10219, EN10220, EN10240, EN10255 pipeand so on. Quality certificate EN10204 DIN50049, Tianchuan... |
Same products
 |
Medical Plastic Parts | 卖方: Packson Mold Co.,Ltd | Project Management To be a qualified medical plastic components manufacturer, the most advanced ... |
 |
PA66 GF15 Heat Stabilized (A2006C, A2016C) for Engineering Plastics | 卖方: Suzhou Anmei Material Technology Co., Ltd | PA 66 GF 15is a 15% glass fiber reinforced, heat-resistance, polyamide 66 resin for injection mol... |
 |
PA66 GF | 卖方: Suzhou Anmei Material Technology Co., Ltd | Anmei focuses on the production of modified engineering plastics. We have polyamide pa6 6gfmodif... |
 |
Nylon6 PA6 | 卖方: Suzhou Anmei Material Technology Co., Ltd | Other than fiber-reinforced pa6 polyamide, the unreinforced nylon type 6 produced by Anmei, one o... |
 |
Nylon 66 Pa66 With High Tensile Strength (A2307X01, A2317X01) for Engineering Plastics | 卖方: Suzhou Anmei Material Technology Co., Ltd | Using Polyamide 66 as the basic resin, the tensile strength of nylon 66 is obtained by blending a... |
