PTFE Molded Rods
In the field of electronics, PTFE moulded rod is often used in semiconductor manufacturing process chip packaging, electronic components protection and other aspects. Because PTFE molded rod has good high temperature resistance and corrosion resistance, it can improve the reliability and stability of electronic products.
In the field of chemical industry, PTFE molded rod is widely used in chemical reactor, storage tank, pipeline, pump and other equipment. Because PTFE molded rod has good corrosion resistance, it can withstand the corrosion of various strong acids, strong bases, organic solvents and other chemical media, so as to ensure the service life and safety of equipment.
In the automotive field, PTFE molded rod is often used in the sealing and lubrication of automotive braking system, engine, steering system and other components. Because PTFE molded rod has good high temperature resistance and corrosion resistance, it can effectively reduce the wear and failure of automobile parts and improve the reliability and safety of automobiles.
In the field of machinery, PTFE molded rodsare often used in mechanical seals, bearings, sliding rails, guides and so on. Because PTFE molded rod has good non-adhesion and wear resistance, it can effectively reduce the friction and wear of mechanical parts, so as to improve the service life and efficiency of machinery.
Specification of theMolded PTFERods
|
Products name |
Specification(mm) |
Remarks |
||
|
Diameter |
Length |
|||
|
PTFE bar |
Molded rods |
16-200 |
100-300 |
|
|
210-300 |
≦150 |
|||
|
Hydraulic rod |
50-300 |
500-1000 |
Outer diameter needs machine procesing |
|
|
Extrusion rods |
20-80 |
<2000 |
The length can be customized |
|
The Technical Indexes of the PTFE Molded Rods
|
Product name |
The implementation of standards |
The technical performance index |
Remarks |
||
|
The proportion of |
Tensile strength (Mpa) |
Crack elongation(%) |
|||
|
Molded rods |
ZGB33003 SFB-1 |
≥14 |
≥140 |
QB/T 3626-1999 |
|
|
Molded pipe |
Company standard |
≥15 |
≥150 |
||
|
Hydraulic rod/tube |
Company standard |
≥14 |
≥150 |
||
|
Extrusion rods/tube |
Company standard |
≥15 |
≥150 |
||
Feature of PTFE Molded Rods
PTFE rods and tubes are sintered with PTFE suspension resin after moulding or hydraulic pressing, or extruded with PTFE presintered disperse resin by plunger.
PTFE is commonly known as the king of plastics. It has many excellent features.
Usage of PTFE Molded Rods
Can be processed into a variety of seals, gaskets.
Electrical insulation electrical equipment parts.
Can also make a variety of chemical anti-corrosion, high temperature resistance or anti-stick parts or products.
There are many ptfe plastic manufacturersin China, but we are one of the best choices for you.
Now the price of ptfe productsis reasonable, anything you need, please leave us a message.
在线联系供应商
Other supplier products
 |
PTFE Gasket | A purePTFE gasketis a type of sealing component made from PTFE material, which is a synthetic fluoropolymer known for its excellent chemical resist... |
 |
UHMWPE Molded Sheet | UHMWPE Molded Sheet Molded UHMWPEsheets find extensive use in a wide range of industries, including automotive, food processing, packaging, marine... |
 |
PTFE Slide Bearing Plate | PTFE slide bearing platesare made of PTFE suspended fine powder resin, cold pressed into billet, sintering forming, pressing grease groove, machine... |
 |
Glass Filled PTFE Products | Glass Filled PTFE Gaskets PTFE filled products by PTFE resin filler, after mixing, pressing and sintering after secondary processing. This product... |
 |
Self Adhesive PTFE Sheet | Self Adhesive PTFE Sheet PTFE surface itself is not adhesive, such as want to bond and other substances must need one side and two sides after Nan... |
Same products
 |
Medical Plastic Parts | 卖方: Packson Mold Co.,Ltd | Project Management To be a qualified medical plastic components manufacturer, the most advanced ... |
 |
PA66 GF15 Heat Stabilized (A2006C, A2016C) for Engineering Plastics | 卖方: Suzhou Anmei Material Technology Co., Ltd | PA 66 GF 15is a 15% glass fiber reinforced, heat-resistance, polyamide 66 resin for injection mol... |
 |
PA66 GF | 卖方: Suzhou Anmei Material Technology Co., Ltd | Anmei focuses on the production of modified engineering plastics. We have polyamide pa6 6gfmodif... |
 |
Nylon6 PA6 | 卖方: Suzhou Anmei Material Technology Co., Ltd | Other than fiber-reinforced pa6 polyamide, the unreinforced nylon type 6 produced by Anmei, one o... |
 |
Nylon 66 Pa66 With High Tensile Strength (A2307X01, A2317X01) for Engineering Plastics | 卖方: Suzhou Anmei Material Technology Co., Ltd | Using Polyamide 66 as the basic resin, the tensile strength of nylon 66 is obtained by blending a... |
