PTFE Gasket
PTFE Gasket
A pure ptfe gasketis a type of sealing component made from PTFE material, which is a synthetic fluoropolymer known for its excellent chemical resistance and low friction properties. PTFE expanded gasket, PTFE flat gaskets are commonly used in various industries and applications where a reliable and effective seal is required.
The Technical Indexes of PTFE GasketChina
|
Type |
Size |
|
DN15 |
22*51*3 |
|
DN20 |
27*61*3 |
|
DN25 |
34*71*3 |
|
DN32 |
43*82*3 |
|
DN40 |
49*92*3 |
|
DN50 |
61*107*3 |
|
DN65 |
77*127*3 |
|
DN80 |
89*142*3 |
|
DN100 |
115*162*3 |
|
DN125 |
141*192*3 |
|
DN150 |
169*218*3 |
|
DN200 |
220*273*3 |
|
DN250 |
273*329*3 |
|
DN300 |
325*384*3 |
|
DN350 |
377*444*3 |
|
DN400 |
426*495*3 |
|
DN450 |
480*555*3 |
|
DN500 |
530*617*3 |
|
DN600 |
630*734*3 |
|
DN700 |
720*804*3 |
|
DN800 |
820*911*3 |
|
DN900 |
920*1011*3 |
|
DN1000 |
1020*1128*3 |
Specification of PTFESoft Gasketand Solid PTFEGasket
|
Item |
Data |
Unit |
|
Density |
g/cm³ |
|
|
Tensile strength |
25-45 |
Mpa |
|
Elongation at break |
200-350 |
% |
|
Compression strength |
24 |
Mpa |
|
Shore D hardness |
50-60 |
|
|
Friction coefficient |
As a ptfe gasket manufacturerand ptfe gasket factory, we can offer sorts of ptfe sealing gasket, ptfe ring gasketfor sale, and the ptfe gasket priceis reasonable, anything you need, please contact us.
We can also offer sorts of uhmwpe productfor sale, if you are interested, please leave us a message.
If you want to find reliable ptfe plastic manufacturers, please choose us, and we will be your best partner.
在线联系供应商
Other supplier products
 |
PTFE Molded Sheet | PTFE Molded Sheet PTFE is divided into molded plate and turning plate two categories. The molded plate is made of PTFE suspension resin by molding... |
 |
Silicone Rubber Products | Silicone rubber is known for its excellent temperature resistance, with the ability to withstand extreme heat and cold without losing its physical ... |
 |
PTFE Slide Plate | A PTFE slide plateis a specialized component used in structural and mechanical applications. It consists of a flat plate made of polytetrafluoroeth... |
 |
PTFE Gasket | A purePTFE gasketis a type of sealing component made from PTFE material, which is a synthetic fluoropolymer known for its excellent chemical resist... |
 |
PTFE Film | Polytetrafluoroethylene filmis made of PTFE resin by molding, sintering, cooling into blank, then by turning, calendering. The ptfe thin filmmad... |
Same products
 |
Medical Plastic Parts | 卖方: Packson Mold Co.,Ltd | Project Management To be a qualified medical plastic components manufacturer, the most advanced ... |
 |
PA66 GF15 Heat Stabilized (A2006C, A2016C) for Engineering Plastics | 卖方: Suzhou Anmei Material Technology Co., Ltd | PA 66 GF 15is a 15% glass fiber reinforced, heat-resistance, polyamide 66 resin for injection mol... |
 |
PA66 GF | 卖方: Suzhou Anmei Material Technology Co., Ltd | Anmei focuses on the production of modified engineering plastics. We have polyamide pa6 6gfmodif... |
 |
Nylon6 PA6 | 卖方: Suzhou Anmei Material Technology Co., Ltd | Other than fiber-reinforced pa6 polyamide, the unreinforced nylon type 6 produced by Anmei, one o... |
 |
Nylon 66 Pa66 With High Tensile Strength (A2307X01, A2317X01) for Engineering Plastics | 卖方: Suzhou Anmei Material Technology Co., Ltd | Using Polyamide 66 as the basic resin, the tensile strength of nylon 66 is obtained by blending a... |
