AlNiCo Magnets
Category: AlNiCo magnets/metal perpament magnets
Advantages: high magnetic energy, good temperature stability
Disadvantages: very low coercive force,easy to be demagnetized, magnetic circuit design can not use thin disc magnets, and must be assemblied first then overall magnetized
AlNiCo magnet Chinais the earliest developed permanent magnetic material, it is an alloy of Al, Ni, Co, Fe and another rare metal element. china alnico magnetsbirthed in 30 years of 20 Century, its magnetic property is best in the years, so it was most widely used in permanent magnetic motors. But that application in motors was replaced step by step when ferrite permanent magnets and rare earth magnets produced. And the proportion of AlNiCo application for motors went down. For AlNiCo magnets, the ability of corrosion resistant is good, surface treatment is not needed for it. It usually made into cylinder alnico magnets for saleor block AlNiCo magnets. The advantages of AlNiCo magnets are high remanence (maximum up to 1.35T) and low-temperature coefficient(-0.02%/℃), maximum working temperature is around 520℃, the magnetic properties change caused by temperature change is very small. The disadvantages of AlNiCo are low coercivity (normally lower than 160KA/m), and the demagnetize curve is not linear, it is easy to be magnetized and also easy to be demagnetized.
According to the different production methods, it classified as sintered AlNiCo magnets and cast AlNiCo magnets. Cast AlNiCo can be machined into different shapes and sizes, for all kinds of permanent magnets, cast AlNiCo magnets have the lowest Temp.Coefficient, its working temperature can be up to 600 degrees. Cast AlNiCo magnets are used for kinds of instruments and meters, auto parts,electric-acoustic, teaching field etc.
Compared with cast AlNiCo magnets, sintered AlNiCo magnets suit for making complex shapes and smaller sizes,the size tolerance for sintered AlNiCo magnets is smaller and better than cast AlNiCo magnets. For sintered AlNiCo magnets, the process is simple and it can be pressed into needed size directly.The property of sintered AlNiCo magnets is lower than cast AlNiCo magnets, but sintered AlNiCo magnets more suitable for machine.Sintered AlNiCo magnets are wide used on instruments and meters, comm unicate,magneto-electricity switch, and kinds of transducers.
|
Type |
(BH)Max |
Br |
Hcb |
D |
a(Br) |
Tc |
Tw |
|||
|
KJ/cm3 |
MGOe |
mT |
Gs |
KA/m |
Oe |
g/cm3 |
﹪/K |
℃ |
℃ |
|
|
LN9 |
680 |
6800 |
30 |
380 |
-0.03 |
760 |
450 |
|||
|
LN10 |
600 |
6000 |
40 |
500 |
-0.03 |
760 |
450 |
|||
|
LNG12 |
720 |
7200 |
45 |
500 |
-0.03 |
810 |
450 |
|||
|
LNG13 |
700 |
7000 |
48 |
600 |
-0.03 |
810 |
450 |
|||
|
LNG34 |
1200 |
12000 |
48 |
600 |
-0.02 |
860 |
525 |
|||
|
LNG37 |
1200 |
12000 |
48 |
600 |
-0.02 |
860 |
525 |
|||
|
LNG40 |
1250 |
12500 |
48 |
600 |
-0.02 |
860 |
525 |
|||
|
LNG44 |
1250 |
12500 |
52 |
650 |
-0.02 |
860 |
525 |
|||
|
LNG52 |
1300 |
13000 |
56 |
700 |
-0.02 |
860 |
525 |
|||
|
LNGT28 |
1000 |
10000 |
58 |
720 |
-0.025 |
860 |
550 |
|||
|
LNGT36J |
700 |
7000 |
140 |
1750 |
-0.025 |
860 |
550 |
|||
|
LNGT32 |
800 |
8000 |
100 |
1250 |
-0.025 |
860 |
550 |
|||
|
LNGT40 |
800 |
8000 |
110 |
1380 |
-0.025 |
860 |
550 |
|||
|
LNGT60 |
900 |
9000 |
110 |
1380 |
-0.025 |
860 |
550 |
|||
|
LNGT72 |
1050 |
10500 |
112 |
1400 |
-0.025 |
860 |
550 |
|||
Meank, as an excellent holding magnets manufacturer, offers a wide range of strong magnets for magnet fishingfor you to choose from.
在线联系供应商
Other supplier products
 |
Pick-Up Magnets | As one kind of magnetic tools,magnetic pick-up toolsare used to pick up small metal parts, screw caps, nails and gasket etc. They called aspick-u... |
 |
Rubber Coated Magnets | The application of permanent magnets is increasing rapidly day by day, especially neodymium (NdFeB) strong magnets. It is more and more used in the... |
 |
Rubber/Flexible Magnets | Brief introduction of rubber magnets(magnetic rubber): Rubber magnets sometimes called magnetic rubber. Magnetic rubber itself has no magnetism , ... |
 |
Magnetic Hooks | Based on different structure features, there are magnetic tool hooks available: magnetic carabiner hooks, reversible magnetic hooks, rotate magneti... |
 |
Rubber Magnetic Sheets | Category: rubber magnets/ flexible magnets Advantages: can be made into complex shape without mechanical processing Disadvantages: low magnet... |
Same products
 |
ABS Edge Banding Customizable | 卖方: Shijiazhuang Qimeida Rubber Material Products Co., Ltd | ABS Edge Banding Customizable ABS edge bandingdoes not add any fillers (such as calcium carbonat... |
 |
BOBCAT T190 BELT 6736775 | 卖方: Colorful tower machinery co ,. ltd | BOBCAT T190 BELT 6736775 Application:BOBCAT Fitting Machine:Excavator Brand:aftermarket Mater... |
 |
Thermoset Molding | 卖方: WIT MOLD LIMITED | Thermoset Molding Key Aspects of Thermoset Molding Materials: Thermosetting Polymers:These inc... |
 |
UNSCREWING MOLDS | 卖方: WIT MOLD LIMITED | UNSCREWING MOLDS Unscrewing moldis a type of mold used in injection molding, primarily for produ... |
 |
dsa anode | 卖方: Baoji Giant Technology Materials Co., Ltd | dsa anode DSA Anode , also known as dimensionally stable anodes, are titanium or niobium su... |
