.

Ce Approved Beam Launcher For Beam

Product Description

Ce Approved Beam Launcher For Beam

Ce Approved Beam Launcher For Beam is suitable for the construction of bridge for roads, railways and other bridge erection construction site. Its main function is to lift the prefabricated beams, then transported onto the prefabricated pier. Ce Approved Beam Launcher For Beam has big difference from the general cranes. Ce Approved Beam Launcher For Beam requests high security.

Packing & Delivery

1. Electric parts of the Ce Approved Beam Launcher For Beamare packed by high quality plywood crate, to reduce distortion in conveying;
2. Main beams, end beams and electric hoist are packed by plastic woven cloth. It can reduce abrasion when transport.

Delivery:

1. If the size is too big, usually by bulk ship or by container after truncation;

2. Transport ways are based on reducing cost for you and keep the crane performance!

FAQ

1.What’stheinformationshouldIprovidewheninquiry about the beam launcher?

1.1 we need the Bridge Drawing;the Maximum longitudinal slope and the Maximum Transverse slope;

1.2 The Girder/beam drawing;

2.What are inspection standard for load test of Beam launcher cranes?
2.1.Dynamic load test
1.1 times rated load, main girder does not down deflection, all mechanisms work well, performance parameters meet the design demand, all limit switches and safety protection interlock devices are reliable, all spare parts does not have cracking and flexible connection, all motors and contactors are not overheat.

2.2.Static load test

1.25times rated load, all mechanisms work well, the crane stops 20-30min as trial load is lifted 10cm high, then measure main girder down deflection(theodolite, ruler). Put down trial load to measure main girder upper camber, repeat 3 times, steel structure does not have permanent deformation;

3.How to make highway bridge concrete girders?

a.Full span prefabrication,

b.Segment girder prefabrication

c. Full span cast-in-place girder

d. Segment cast-in-situ


在线联系供应商

至: Huada Heavy Industry
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

80 tons easy operation ship building dock gantry crane
80 tons easy operation ship building dock gantry crane Product Description 80 tons easy operation ship building dock gantry craneis applied outside warehouse or railway sideways to do common lifting an...
Full span launching gan全跨度龙门起重机900T混凝土梁架设机
Full span launching gan全跨度龙门起重机900T混凝土梁架设机 全跨径龙门起重机900吨启闭机 全跨径启航龙门起重机900T整机由我公司华达重型起重机集团设计部研制设计,用于高速铁路桥梁施工(250公里/小时、350公里/小时)。全跨径龙门起重机的最大承载能力为900吨。900T全跨径龙门起重机具有重量轻、稳定性好、自定位精确、横梁定位精确、操作方便等优点...
高精度高架起重机钢轨行走轮
高精度高架起重机钢轨行走轮 产品描述 高精度高架起重机钢轨行走轮是行走单元中最重要的部件,也是由于轮轨之间的冲击和磨损较强而最脆弱的部件。法兰磨损、法兰断裂和疲劳点蚀是经常遇到的问题。摘要高精度高架起重机钢轨行走轮在断裂时,其修复和更换是一项复杂而费时的工作。 盛华重工集团高精度高架起重机钢轨行走轮: 采用高增益、全镇静...
自行式混凝土梁运输车用组合式拖车
自行式混凝土梁运输车用组合式拖车 产品描述 该车具有载重量大、自行式、运输距离不限、性能可靠、安全设施齐全、结构合理、运行稳定、操作舒适、维修方便、抗倾覆稳定、生产效率高等特点。操作简单,司机只需要简单的培训就可以做这项工作。维修方便,备件属于国家标准件。 主要适用于预箱梁场距离桥梁施工现场较远,且不宜敷设钢轨或敷设钢轨造价较...
电动高架起重机双速行走端车
电动高架起重机双速行走端车 产品描述 双速行走端小车端车为电动高架起重机采用矩形管制造模块,缓冲电机驱动,配合锻造车轮,采用数控车床镗铣各种订制机床,一次性完成开孔、镗削、铣钻。你只需要连接和调整起重机梁和端架。低成本,使您的起重机制造、安装和维修非常容易。 优势 1.轻量级的健壮的建设。 2.提升最大负载的低努力。 3...
供应产品

Same products

Cement Look
Cement Look 卖方: Guangdong Dacheng Ceramics Co., Ltd. Cement Look Urban Cement, back to nature, restore the foundation of cement, use the most simple ...
Marble
Marble 卖方: Guangdong Dacheng Ceramics Co., Ltd. Marble The design inspiration of the Bvlgari Series traces deeply to the cultural treasures of a...
Australian Seastone
Australian Seastone 卖方: Guangdong Dacheng Ceramics Co., Ltd. Australian Seastone Australian sandstonewas formed by the weathering of quartz, water erosion, a...
Porcelain Tiles
Porcelain Tiles 卖方: Guangdong Dacheng Ceramics Co., Ltd. Porcelain Tiles China Porcelain Tiles Factory — Wholesale & Customized Porcelain Tiles...
MOISTURE-RESISTANCE MDF
MOISTURE-RESISTANCE MDF 卖方: Linyi minchan imp&exp co.,ltd MOISTURE-RESISTANCE MDF Moisture Resistant MDF (HMR MDF)by MinChanis specially engineered for us...