Graphite Gaskets Reinforced With Eyelet On Both Inner And Outer
1.The graphite gasket made from graphite reinforce sheet and can be processed to be internal ring and external ring .The general thickness is 1.5mm, 3.0mm, 2.0mm, 4.0mm . 2. Application: It has very good sealing performance, low preloaded pressure, and not sticking to the flange sealing surface; used in the flange surface sealing of pipeline, valve, pump, pressure containers, heat exchanger, and reaction cauldron, etc. The film sticking PTEE can be used in food, pure water, and pharmacy sections. 3. Technique Specification:1). Working temperature: -200℃~650℃2). Working pressure: 6.4~10.0MPa3). Min. Pre-tightening specific pressure: y=30MPa4). Gasket coefficient: m=25). Max. size: 1500x2000mm
Other supplier products
|
|
|
escriptionExpanded PTFE Gasket is 100% PTFE, resistant to all corrosive media. Soft, twistable and bendable at will.Excellent anti-wriggle variatio... |
|
|
|
Kevlar PTFE Graphited Packing Features:It is a high-quality baided packing made of PTFE yarns fiber with incorporated graphite and the reinforced c... |
|
|
|
Description: CGFO Packing is made by traditional graphite PTFE yarn, double layers of graphite expanded PTFE with graphite sandwich. It has very lo... |
|
|
|
Rring Joint gaskets come in two basic types, an oval cross section and an octagonal cross section .These basic shapes are used in pressures up to 1... |
|
|
|
t is weaved by PTFE fiber after tension and strengthening as well as PTFE emulation soaking. It is suitable for chemical industry (other than Fluor... |
供应产品
Same products
