YTD-12 Diesel Cold Flow Improver,Diesel Pour Point Depressant,PPD And CFPP, Heat Fuel Additives For Cold Weather
YTD-12 Diesel Cold Flow ImproverⅠ. Introduction: The series diesel cold flow improver YTD-12 produced by our company, specifically for domestic and foreign refineries, diesel fuel can be reduced to varying degrees of freezing point and cold filter plugging point, to improve low temperature fluidity of diesel.Ⅱ.Physical index：ItemYTD-12AYTD-12BYTD-12CYTD-12DAppearanceClear or orange viscosity liquidClear or orange viscosity liquidClear or orange viscosity liquidClear or orange viscosity liquidDensity（20℃）kg/ m3850～970850～970850～970850～970Pour point（℃）≤12203035Kinematic viscosity（50℃）mm2/s10～20010～20010～30010～300Ⅲ.Usage：Mainly as a production 0 #, -10 #, -20 #, -35 # diesel fuel additives, the use of this product can not only reduce diesel pour point and cold filter plugging point, to improve low temperature fluidity of diesel fuel to improve the diesel label, you can also increase the yield of light diesel oil, refinery to improve economic efficiency, energy conservation, improve energy utilization.Ⅳ. Use method：1. Normally, the dosage is less than 0.1%,most refineries adding 0.01—0.06%.2. The effect depends not only on their performance, but with the use of oil and refining processes are closely related. To reach the better effect, it must test before using, official use after confirm the scheme.3. The improver could not be pour into the diesel directly,otherwise will affect the result. It should be dubbed the mother liquor, and ensure depressant mixing with diesel fuel to achieve the desired effect of the use.The configuration of Mother liquor: use jet fuel or diesel fuel at atmospheric pressure three-line dilution, pour point depressant and diluents ratio of 1:15. Operating temperature not lower than 50℃, adding the mother liquor into diesel fuel with a good mixed.Ⅴ.Packing and storage：1. Packed by steel drum, the net weight is 170KG each drum.2. Avoid the light when transportation and storage, keep clean, avoid water and impurities.
Other supplier products
|
|
|
YTN-01 High Efficiency Sludge Stripping AgentⅠ. Characteristics and Application：YTN - 01 High efficiency sludge stripping agent is made up of effic... |
|
|
|
YTR-01 Diesel Lubricity Improver
（Diesel Anti-wear Agent）
Ⅰ. Introduction:
The product can improve the diesel lubricity, re... |
|
|
|
YTE-01 Removing Thiol Activating AgentⅠ. Introduction: This product is a new type mercaptan activator, contains active ingredients and organic alka... |
|
|
|
YT-06 Tetraethyl Lead (T.E.L)Ⅰ．Introduction：TEL is an organolead compound with the formula (CH3CH2)4Pb. It was mixed with gasoline (petrol) as an i... |
|
|
|
YTD-15 Petroleum DemulsifierⅠ. Introduction: This product is a polyether-based polymers. Study abroad in different types of demulsifiers based on t... |
供应产品
Same products
