Diethanolisopropanolamine (DEIPA)
CAS No.: 6712-98-7
PHYSICAL AND CHEMICAL CHARACTERISTICS
EDIPA 85%
Water contents15%
Colorless to weak yellow liquid
Boiling Point: 145 °C @ .60mm Hg
Freezing/Melting Point: 31.50 - 36.00 °C
Flash Point: > 112 °C
Specific Gravity/Density: 1.0790g/cm3
Molecular Formula: C7H17NO3
Molecular Weight: 163.22
INTRODUCTION
Diethanol-isopropanolamine (DEIPA) is an alkanol amine used in the formulation of cement additives and concrete admixtures. Besides being a good grinding aid in the cement mill, DEIPA increases the strength of cements at all hydration ages, and cements blended with fly ash and slag tend to show a greater response to the chemical. In this research, the impact of DEIPA on the hydration of blast furnace slag blended cements is studied using several analytical techniques, such as quantitative X-ray diffraction with Rietveld refinement (QXRD), scanning electron microscopy (SEM) with backscattered electron image analysis, thermogravimetric analysis (TGA), and chemical shrinkage. Isothermal calorimetry was also used to demonstrate the impact of DEIPA on the reactivity of slag in blended cements. Compressive strength tests were performed to assess the impact of the amine in such cements. It is demonstrated that DEIPA increases the mortar strength by enhancing primarily the aluminate hydration and the morphology and composition of the hydrates, such as calcium hydroxide and C-S-H. The visual observation was confirmed by isothermal calorimetry, where DEIPA was found to directly enhance the rate of reaction of granulated blast-furnace slag after 48 hours of hydration.
PRODUCT SPECIFICATION
|
DEIPA 85% |
DEIPA 98% |
|
|
contents |
98% |
|
|
2% |
||
|
Appearance |
||
PHYSICAL AND CHEMICAL CHARACTERISTICS
EDIPA 85%
Water contents15%
Colorless to weak yellow liquid
Boiling Point: 145 °C @ .60mm Hg
Freezing/Melting Point: 31.50 - 36.00 °C
Flash Point: > 112 °C
Specific Gravity/Density: 1.0790g/cm3
Molecular Formula: C7H17NO3
Molecular Weight: 163.22
PACKINGPacked in iron drum, net weight 200kg, 1000KG IBC and 20 tons flexibag can be specified according to customer’s requests.
在线联系供应商
Other supplier products
 |
Ammonium Thiocyanate | Synonyms: Ammonium Rhodanide, Ammonium Sulfocyanate, Ammonium Sulfocyanite, Ammonium Rhodanate, Thiocyanic Acid, Ammonium SaltMolecular Formula: N... |
 |
N-Oleoyl Sarcosine Acid | Molecularformula:C17H33CO-N-COOH ChemicalName:N-Oleoylsarcosineacid Appearance:brownoilyliquid MolecularWeight:353 Formula: C17H33CO-N-COOH | CH3 ... |
 |
Iodopropynyl Butylcarbamate (IPBC) | INCI: Iodopropynyl Butylcarbamate CAS: 55406-53-6 EINECS: 259-627-5 Molecular Formula: C8H12INO2 Molecular Weight: ... |
 |
Zinc Acylate Polymer | SPZn-100isaneconomicalmatrixresinproductusedfortin-freeself-polishingpaint,itisonlysuitableforcopper-containingformulationsandmustbeblendedwithCDP(... |
 |
Silyl Acylate Polymer | SPSi-100isahighperformancematrixresinproductusedfortin-freeself-polishingpaint,itisonlysuitableforcopper-containingformulationsandcanbeblendedwithv... |
Same products
 |
Lubcon Turmogrease L 251 1KG for High Speed Bearings | 卖方: 广东聚广恒自动化设备有限公司 | TheL251is a great mic. Nice sound and nice build quality |
 |
ALA-07-0 700g Grease for CNC Machinery Industry | 卖方: 广东聚广恒自动化设备有限公司 | Machining center machine tool laser cutting machine grease |
 |
JR3A Emulsifying Paste for Wire Cutting | 卖方: 广东聚广恒自动化设备有限公司 | Applied to all types of Wire-cutting Electric Discharge machine. It can be also used as cooling l... |
 |
MOLYKOTE G-4500 FM 400G Grease Original New | 卖方: 广东聚广恒自动化设备有限公司 | GPL227 Grease |
 |
SKF LGHP 2/1 1kg Bearing Grease Using in High temperature | 卖方: 广东聚广恒自动化设备有限公司 | recommend grease SKF LGLT 2-0.2 180G grease SKF LGMT 2/1 NSK Ns7 K3035K Grease for FUJI Nxt Ma... |
