20000m3/hr cyclone dust collector
Introduction:
The CLP-B type cyclone dust collector can be used either alone or in combination with multiple cylinders. It is connected by a common gas inlet
and outlet gas cylinder to satisfy any smoke volume treatment. The unit of each dust collector has four parts: body, volute, core tube and sealed
dust collection device with good performance.
The working principle of the CLP-B cyclone dust collector after adding the bypass is that the dust-laden gas enters the tangential direction from
the entrance. When the air flow obtains the rotating motion, the air flow is separated from the upper and the lower to form a double-scroll
cochlear motion. The dust is in the double-scroll There is a strong separation effect at the boundary. The coarser dust particles are separated to
the outer wall with the down spiral vortex flow. Part of the dust is led out from the central hole of the bypass separation chamber, and the
remaining dust is carried by the downdraft. The upper vortex air flow has aggregating effect on fine-grained dust, thereby improving the dust
removal efficiency. This part of the finer dust particles, from the upper spiral vortex to the upper part, forms a strongly rotating upper dust ring
under the top cover, and enters the upper hole of the bypass separation chamber together with the upper spiral worm gas flow, and is introduced
into the cone through the return air inlet. With the internal air flow, the purified gas is discharged from the exhaust pipe, and the separated dust
enters the hopper.
Structure size:
1. The size of the exhaust pipe The depth of the exhaust pipe should be at the interface between the upper and lower air swirlers. Exhaust pipe
insertion depth and dust removal efficiency. The depth of insertion is about 1/3 of the height of the intake day; and it has nothing to do with the
type of dust, the particle size distribution, and the inlet gas velocity. The deeper the insertion depth of the exhaust pipe, the greater the pressure
loss.
2. Bypass Separation Chamber Side Separation Separation The top side seam of the bypass chamber introduces the upper vortex gas flow into
the bypass separation chamber. The cone side seam introduces the dust ring formed by the lower spiral in the upper cone into the bypass
separation chamber. The height of the side seam is generally the distance from the top edge of the inlet to the top cover.
If you need, please feel free to contact Miss. Livia
在线联系供应商
Other supplier products
 |
UE619 Series Fiberglass Return Line Oil Filter Element UE619AN40Z | Introduction: 1.Lefilter filter is widely used in hydraulic system and lubrication system to filter out the metal particles and rubber impurities c... |
 |
Long bag filter low pressure pulse type dust collector | Introduction: Long bag off-line pulse dust remover is mainly composed of upper tank, middle tank, ash hopper, air inlet flow pipe, bracket, filter... |
|
|
Big Flow Rate Water Filter Cartridges RF050-40-NPX for RO filtration system | Introduction: PARKER filter provides a filtering scheme which can effectively replace deep and other inner diameter 2 1/2’’ forms in he... |
 |
filter cartridge dust collector for powder recovery | Features: 1, high dust removal efficiency. Can filter fine dust, general filter cartridge filter accuracy of 5 ~ 7 microns, filtration efficiency ... |
|
|
EPE filter elements 1.0063G60-A00-0-P | EPE filter elements1.0063G60-A00-0-P Introduction: EPE filter element is widely used in the hydraulic system and lubricant system to filter the so... |
Same products
 |
Insulating Powder Coating | 卖方: Standard International Group (HK) Limited | WA：+86 132 6275 2056 WEB: std-coatings.com Introduction Insulating Powder Coatingis engineer... |
 |
Anti-graffiti powder coating | 卖方: Standard International Group (HK) Limited | WA：+86 132 6275 2056 WEB: std-coatings.com Introduction Anti-Graffiti Powder Coatingis a hig... |
 |
High-temperature resistant powder coatings | 卖方: Standard International Group (HK) Limited | WA：+86 132 6275 2056 WEB: std-coatings.com Introduction STD high-temperature resistant powde... |
 |
Hydraulic Cylinder Manufacturer | 卖方: CHINA'S HYDRAULIC SYSTEM INTEGRATION EXPERT | Hydraulic Cylinder Manufacturer HYDRAULIC CYLINDER Hydraulic Cylinder Manufacturer and Su... |
 |
Post-forming powder coatings | 卖方: Standard International Group (HK) Limited | WA：+86 132 6275 2056 WEB: std-coatings.com Introduction Chemical Type: Epoxy/Polyester or Pu... |
