Color PEEK R&D Series
PEEK ColorR&D Series can be customized according to the customer's own demand. Different PEEK plastic colorscan be chosen for our PEEK raw material. Having good thermal stability, color consistency, high purity, and high-temperature resistance, our PEEK material colorR&D series is just as high quality as other plastic PEEKmaterialseries.
PEEK Natural ColorR&D Series Specifications
Material Properties |
Test Method |
Conditions |
Units |
770G |
Mechanical Data |
||||
Tensile Strength |
ISO 527 |
B reak,23℃ |
MPa |
- |
Y ield,23℃ |
MPa |
100 |
||
Tensile Elogation |
ISO 527 |
Break,23℃ |
% |
45 |
Flexural Strength |
ISO 178 |
Break,23℃ |
MPa |
- |
Y ield,23℃ |
MPa |
165 |
||
Fleoural Modulus |
ISO 178 |
23℃ |
Gpa |
|
Compressive Strength |
ISO 604 |
23℃ |
MPa |
125 |
Charpy Impact Strength |
ISO 179/leA |
Notched |
kJm-2 |
7 |
ISO 179/IU |
Unnotched |
kJm-2 |
- |
|
Izod Impact Strength |
ISO 180/A |
Notched |
kJm-2 |
|
ISO 180/U |
Unnotched |
kJm-2 |
- |
|
Mould Shrinkage |
ISO 294-4 |
Along flow |
% |
1 |
Across flow |
% |
|||
Thermal Data |
||||
Melting Point |
ISO 11357 |
℃ |
343 |
|
Glass Tansition (Tg) |
ISO 11357 |
Onset |
℃ |
143 |
Special Heat Capacity |
DSC |
23℃ |
kj kg-1℃-1 |
|
Coefficient of Thermal Expansion |
ISO 11359 |
Along flow below Tg |
ppm K-1 |
45 |
Along flow above Tg |
ppm K-1 |
120 |
||
Heat Deflecion Temperature |
ISO 75A-f |
℃ |
152 |
|
Thermal Conductivity |
ASTM C177 |
23℃ |
W m-1K-1 |
|
Flow |
||||
MeltIndex |
ISO 1133 |
380℃,5kg |
g10min-1 |
10 |
Miscellaneous |
||||
Density |
ISO 1186 |
Crystalline |
gcm-3 |
|
Amorphous |
gcm-3 |
|||
Shore D Hardness |
ISO 868 |
23℃ |
85 |
|
Water Absorption(3.2mm thick Tensile Bar) |
ISO 62-1 |
24h,23℃ |
% |
|
by immersion |
Equilib riu m,23℃ |
% |
||
Electrical Data |
||||
Dielectric Strength |
IEC 60243-1 |
2mm |
kV mm-1 |
23 |
Comparative Tracking Index |
IEC 60112 |
V |
150 |
|
Dielectric Constant |
IEC 60250 |
23℃,1kHz |
||
23℃,50kHz |
3 |
|||
Loss Tangent |
IEC 60250 |
23℃,1MHz |
||
Volume Resistivity |
IEC 60093 |
23℃,1V |
Ω cm |
10 16 |
275℃ |
If you want to know more about peek material cost, please contact us.
在线联系供应商
Other supplier products
PEEK Valve in Home Appliances | PEEK Valvein Home Appliances Polyetheretherketonhas good wear resistance, self-lubrication, non-toxicity, high-temperature resistance, low densi... | |
Grade FC Super Wear Resistant PEEK | PEEK-FC series modified by PTFE, graphite and carbon fiber have lower friction coefficient, wear resistance and self-lubrication than pure resin G.... | |
Natural PEEK Raw Material Applications | Natural PEEK Plastic Applications PEEK polyetheretherketone raw material has excellent comprehensive properties and can replace traditional materi... | |
Grade PF PEEK Pure Resin Fine Powder | The material is obtained by grinding the coarse powder (D50 is 13 micron ~ 75 microns) . It can be used as moulding material, spraying material and... | |
CA Series-330CA30 PEEK Carbon Fiber Reinforcement | CA Series-330CA30 PEEKFC, CFPEEKcarbon fiber reinforcement is suitable for the production of bushing seals and other products, can be faster from t... |
Same products
MOBILUX EP 0 16KG Lithium Complex Grease | 卖方: 广东聚广恒自动化设备有限公司 | Mobilux EP 0grease is a brown lithium complex grease that provides good low temperature pumpabili... | |
Nisin | 卖方: Hebei Shengxue Dacheng Pharmaceutical Co., Ltd. | Nisin, a natural antimicrobial peptide, has various applications in the food industry due to its ... | |
Nisin | 卖方: Hebei Shengxue Dacheng Pharmaceutical Co., Ltd. | Nisin is considered a natural preservative because it is derived from the fermentation of bacteri... | |
Nisin | 卖方: Hebei Shengxue Dacheng Pharmaceutical Co., Ltd. | Nisin is a natural antimicrobial peptide produced by certain strains of the bacterium Lactococcus... | |
Nisin Quality Manufacturer | 卖方: Hebei Shengxue Dacheng Pharmaceutical Co., Ltd. | In some cases, the addition of nisin allows dairy products to be preserved without the need for e... |