rtv2 liquid tin cure silicone rubber soap candle art craft mold
rtv2 liquid tin cure silicone rubber soap candle art craft mold
Description
Two-component silicone, tin-curing, flowable, vulcanizes at room temperature.Can be used for a long time in the temperature range of - 65 ° C - 200 ° C and keep its soft and elastic properties.
Application
General mold making.
Suitable for reproducing and replicating products in large quantity for industries: Art crafts, sculptures, furniture, architectural elements, garden ornaments, tire, soap, candle and so on.
Used for making molds for variety of material, such as resin, PU, gypsum, plaster, concrete, cement, stone, GRC, PVC, polyester, wax, bronze and so on.
Features& Advantages
²Low shrinkage
²Anti-deformation
²Not oily,
²No bubbles
²Excellent flow levelingwhich will copy finest details and patterns from exquisite products.
²Durable with excellent tear and tensile strength, guarantee molding times
²Easily demolding
²Resist aging, acid,alkali,corrosionand weather aging
²Thixotropic agent/ thickening agent is available for brushing molding method
Typical propertiesINI-620
|
PropertiesIndex |
Test Report |
|
|
Before Curing |
Appearance |
White/ Translucentfluid |
|
Viscosity（cps） |
15000±1000 (Adjustable) |
|
|
Operating |
Mixing Ratio （By weight） |
100：2 |
|
Operating Time（25℃/min） |
30～50 (Adjustable) |
|
|
Curing time（hr,basically cured） |
3~5 (Adjustable) |
|
|
Curing time（hr, perfectly cured） |
12 |
|
|
After Curing |
Hardness (shore A) |
20±2 |
|
Tear strength (kN/m) |
21±3 |
|
|
Tensile strength (Mpa) |
4.4±0.5 |
|
|
Shrinkage (%) |
≤0.3 |
|
|
Elongation (%) |
405~500 |
|
|
Density (g/cm) |
1.08 |
|
Operation instructions
1.Mix part A and pars B evenly with 100:2 mixing ratio.
Notes: 1) Weigh the two parts exactly by electronic weight. For example, the operation time will be shorten after adding too much catalyst.
2)Mix part A and part B evenly. Otherwise the silicon rubber will be partly solidified which will make the finished molds meet a short life and waste silicon rubber.
2.Vacuum pumping
Notes: 1) This step is not have to have, but it is best if there is one. It will discharge all air in the mixture successfully, so as to ensure that therewill be no bubbles in the finished mold.
2) This step is less than 10 minutes. Otherwise, it will cause cross-linking reaction, and no morefurther steps will be available.
- Pouring casting or Brush molding
Notes:1) For simple pattern products we suggest use pouring operation way, which will be very easy to operate and demould. Pourable silicone require low viscosity which will be easy to flow smoothly and easy to de-air.
2)For delicate pattern products we suggest use brushing operation way, which can copy the pattern exactly. Brushable silicone require high viscosity which won’t be easy to flow away and easy to brush.
3)We suggest to set the mold for another 12 hours after demould before put it into large production.
Package
5KG, 20KG, 25KG and 200KG per drum.
(There are metal drum and plastic drum for your choice for 5KG and 20KG)
Shelf life
Twelve(12) months when stored under dry and cool place by original package under 25℃.
WhyChooseus
1.Powerfulfactorywithaproductioncapacityof8000perday, we are the more than 10 years factory in China, with excellent and stable quality.
2.High-endresearchanddevelopment(freesample)
BeingaleadingliquidsiliconemanufacturerinChina,wehaveaprofessionalR&DteamandQCteam(12experts)andourproductisRoHS,MSDS,ISO,REACH,ULapproved,sothereisnoneedtoworryaboutthequality.
3,Efficientservice
Wecanprovidefreetrainingofsiliconetechniqueandfreesiliconesamples.wehaveaprofessionalsalesteamwhowillsolveyourproblemspatiently.Besides,withefficientlogisticsdistributionsystem,youcouldgetyougoodsearlier.Last,goodaftersalesservice,webuildlongtermcooperationrelationship,oncethereisqualityproblem,wecouldsolverightaway.Moreimportantly,returnandexchangeareacceptedwhilequalityproblemsoccurred.
We can provide the free sample, more details about silicone rubber, pls contact Ms Lisa at:
Mobile/ Whatsapp/: +86 188 1670 2967
2967or A108059
E-mail:lisasilicone(at)
Twitter/Facebook:lisasilicone
在线联系供应商
Other supplier products
 |
skin safe medical silicone rubber sex doll dildo silicone breast bra silicon | skin safe medical silicone rubber sex doll dildo silicone breast bra silicon Description Two-component silicone,platinum-curing/ addition-cure t... |
 |
addition base Silicone Rubber for Prototyping 3d lost wax castings Mold Liquid | addition base Silicone Rubber for Prototyping 3d lost wax castings Mold Liquid Description Two-component silicone,platinum-curing/ addition-cure ... |
 |
clear platinum cure silicone rubber jewelry molding high quality free sample | clear platinum cure silicone rubber jewelry molding high quality free sample Description High transparency, two-component silicone,platinum-curin... |
 |
platinum cure silicone rubber prosthesis hands foot ear product liquid silicone | platinum cure silicone rubber prosthesis hands foot ear product liquid silicone Description Two-component silicone,platinum-curing/ addition-cur... |
 |
rtv2 platin rtv2 platinum based silicone rubber chocolate candle craft Wax Statue moldum based silicone rubber chocolate candle craft Wax Statue mold | 描述 rtv2 铂基硅橡胶巧克力蜡烛工艺蜡像模具 铂固化/加成型硅胶是一种双组分硅橡胶，加成型或铂固化类型，混合比为 1:1 或 10:1。它可以在室温下固化，也可以在高温下固化。它是一种食品级硅胶，主要用于模具制作。 应用和优势 模具制作硅橡胶用于复制和复制工艺品、家具、原型、建筑元素、... |
Same products
 |
Hot Melt Adhesive for Vacuum Insulation Panels | 卖方: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Vacuum Insulation Panels Supply & Technical Support Capabilities ... |
 |
Hot Melt Adhesive for Packaging | 卖方: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Packaging Bond Strength & Durability: Hot melt adhesives provide i... |
 |
Hot Melt Adhesive for Hygiene Products | 卖方: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Hygiene Products refers to thermoplastic pressure‑sensitive adhesives ... |
 |
LSAW Steel Pipe & Tube | 卖方: HEBEI TIRICO PIPELINE CO.,LTD | LSAW Steel Pipe & Tube , or Longitudinal Submerged Arc-Welding Pipe (also known as SAWL ... |
 |
Anti-Corrosion Steel Pipe & Tube | 卖方: HEBEI TIRICO PIPELINE CO.,LTD | Anti-Corrosion Steel Pipe & Tube Anti-Corrosion Steel Pipe & Tube What Is an Anti... |
