MBT (M) 2- Mercaptobenzothiazole CAS 149-30-4
149-30-4 –Names and Identifiers
| Name | 2-Mercaptobenzothiazole |
| Synonyms | M MBT 2-MBT Z-MBT 2-Benzothiazolethiol Rubber Accelerator M Sulfur Accelerator M Benzothiazole-2-thiol Rubber Accelerator MBT 2-Mercaptobenzothiazole 1,3-benzothiazole-2(3H)-thione Rubber Pharmaceutical intermediate Refined(M) |
| CAS | 149-30-4 |
| EINECS | 205-736-8 |
| InChI | InChI=1/C7H5NS2/c/h1-4H,(H,8,9) |
149-30-4 –Physico-chemical Properties
| Molecular Formula | C7H5NS2 |
| Molar Mass | 167.25 |
| Density | 1.46g/cm3 |
| Melting Point | 172-180℃ |
| Boling Point | 305°C at 760 mmHg |
| Flash Point | 138.3°C |
| Water Solubility | <0.1 g/100 mL at 19℃ |
| Solubility | Soluble in alkali and carbonate solution, soluble in glacial acetic acid in appropriate amount, almost insoluble in water. |
| Vapor Presure | 0.000844mmHg at 25°C |
| Appearance | Crystallization |
| Storage Condition | 2-8℃ |
| Sensitive | Sensitive to air and light |
| Refractive Index | 1.783 |
| MDL | MFCD00005781 |
| Physical and Chemical Properties | Density 1.42 melting point 172-180°C flash point 243°C (dec.) water solubility <0.1g/100 mL at 19°C |
| Use | Mainly used in the manufacture of tires, inner tube, tape, rubber shoes and other industrial rubber products |
149-30-4 –Risk and Safety
| Hazard Symbols | Xi – Irritant N – Dangerous for the environment |
| Risk Codes | R43 – May cause sensitization by skin contact R50/53 – Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. |
| Safety Description | S24 – Avoid contact with skin. S37 – Wear suitable gloves. S60 – This material and its container must be disposed of as hazardous waste. S61 – Avoid release to the environment. Refer to special instructions / safety data sheets. |
| UN IDs | UN 3077 |
149-30-4 –Upstream Downstream Industry
| Downstream Products | Inhibitor 2,2′-Dithiobis(benzothiazole) Benzothiazole corrosion inhibitor PBTCA-type N,N-Dicyclohexyl-2-benzothiazolsulfene amide N-Cyclohexyl-2-benzothiazolesulfenamide 2-(Morpholinothio)benzothiazole N-tert-Butyl-2-benzothiazolesulfenamide 2-Chlorobenzothiazole N-methylbenzothiazol-2-amine scale inhibitor and sipersant TS-104 scale agent QⅠ-105 Accelerator DBM 2-((Difluoromethyl)sulfonyl)benzo[d]thiazole, 98% 2-Amino-6-nitrobenzothiazole 2-Methylmercaptobenzothiazole |
149-30-4 –Nature
| Vapor pressure | <0.000003 hPa (25 °C) |
| refractive index | 1.6100 (estimate) |
| flash point | 243 °C |
| storage conditions | Store below +30°C. |
| solubility | 0.12g/l |
| acidity coefficient (pKa) | 9.80±0.20(Predicted) |
| morphology | Powder |
| color | Yellow |
| Odor | Odorless |
| PH value | 7 (0.12g/l, H2O, 25℃) |
| explosion limit value (explosive limit) | 15%(V) |
| water solubility | <0.1 g/100 mL at 19 °C |
| maximum wavelength (& lambda;max) | 325nm(MeOH)(lit.) |
| sensitivity | Air Sensitive |
| Merck | 14,5868 |
| BRN | 119484 |
| stability | Stable. Incompatible with strong oxidizing agents. Flammable. |
| InChIKey | YXIWHUQXZSMYRE-UHFFFAOYSA-N |
| (IARC) Carcinogen Classification | 2A (Vol. 115) 2018 |
| NIST chemical information | 2-Mercaptobenzothiazole(149-30-4) |
| EPA chemical information | 2-Mercaptobenzothiazole (149-30-4) |
在线联系供应商
Other supplier products
 |
CAS 793-24-8 6PPD (4020) N-1,3-dimethylbutyl-N’-phenyl-p-phenylenediamine | Introduction Chemical Name :N-(1,3-Dimethylbutyl)-N’-phenyl-p-phenylenediamine CAS NO. :793-24-8 Product Specification: Appearance ... |
 |
Tricresyl phosphate (TCP) CAS 1330-78-5 | 1330-78-5 – Names and Identifiers Name Tricresyl phosphate Synonyms TCPKronitex TCPDisflamol TKPPhosflex LindolTritolyl phospha... |
 |
STD 2461 Fluorinated surfactant solution | Composition: Fluorinated surfactant solution Appearance: light yellow viscous liquid Active ingredient: 18% Solvent: water/alcohol mixtureApplic... |
 |
Styrene CAS 100-42-5 | Introduction Styrene SDEB is a type of styrene produced by catalytic dehydrogenation of ethylbenzene. It is used to manufacture polystyrene, ABS p... |
 |
Dimethyl Lauryl/myristyl Amine CAS 84649-84-3 | Introduction Chemical Name Dimethyl Lauryl/myristyl Amine Product Category Fatty Tertiary Amine CAS No. 84649-84-3 Content... |
Same products
 |
Easy-cleaning Silicone-Modified Waterborne UV Resin | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | LUV533 is a high-performance, silicone-modified hexafunctional waterborne UV resinengineered to d... |
 |
Water-based Soft-Touch Resin for Consumer Electronics | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | Water-based Soft-Touch Resinis an advanced coating material formulated to deliver a luxurious, ve... |
 |
Conformal Coatings | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | The conformal coatingsprovide good adhesion to metal, PCB and other substrates after curing at ro... |
 |
Metalized & Laser Transfer coating | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | Metallized and laser transfer coatingsare designed with sustainability in mind, ensuring minimal ... |
 |
Hydrophilic coatings for Air Conditioner | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | A water-based coating combination applied on the surface of aluminum foil, which forms a layer wi... |
