Ultra-Pure Argon
WA：+86 132 6275 2056
WEB: std-coatings.com
Product Details
Product Names
Ultra-Pure Argon
High-Purity Argon
Argon
Purity
Ultra-Pure Argon: ≥99.9999%
High-Purity Argon: ≥99.999%
Impurity Content (ppm)
| Impurity | Ultra-Pure Argon | High-Purity Argon |
|---|---|---|
| Water (H₂O) | ≤0.6 | ≤3 |
| Oxygen (O₂) | ≤0.1 | ≤1.5 |
| Nitrogen (N₂) | ≤1 | ≤4 |
| Carbon Monoxide (CO) | ≤0.1 | ≤1 |
| Carbon Dioxide (CO₂) | ≤0.1 | ≤1 |
| Hydrocarbons (THC) | ≤0.1 | ≤1 |
Packaging
Filled in steel cylinders of 40L, 49L, 50L, and also available in smaller cylinders of 8-10L upon customer request.
Applications
Recommended for industrial and laboratory use, including bulb inflation, welding, and instrument experiments.
Safety Information
CAS Number: 7440-37-1.
Physical and Chemical Properties: Colorless and odorless inert gas. Slightly soluble in water. Melting point (℃): -189.2; Boiling point (℃): -185.7; Relative density (water=1): 1.40 (-186℃); Relative density (air=1): 1.38; Saturation vapor pressure (kPa): 202.64 (-179℃); Flash point (℃): No data; Combustion heat (kJ/mol): 241; Critical temperature (℃): -122.3; Critical pressure (MPa): 4.86; Upper explosion limit (v%): Not applicable; Lower explosion limit (v%): Not applicable; Ignition temperature (℃): Not applicable.
Combustion and Explosion Hazards: Non-flammable. Under high heat, the pressure inside the container may increase, posing a risk of rupture and explosion.
Firefighting Methods: Non-flammable, asphyxiating. Remove containers from the fire area if possible. Spray water to keep the containers cool until the fire is out. Evacuate people to the upwind side and isolate the contaminated area. Emergency personnel should wear self-contained positive pressure breathing apparatus and general work clothes. Cut off the leak source if possible. Ensure adequate ventilation to disperse the gas. Handle the leaking container properly, repair and inspect before reuse.
Health Hazards: Non-toxic under normal pressure. High concentrations can cause asphyxiation by reducing oxygen partial pressure. Argon concentrations above 50% can cause severe symptoms; concentrations above 75% can be fatal within minutes. Symptoms include increased breathing rate, lack of concentration, ataxia, followed by fatigue, restlessness, nausea, vomiting, coma, convulsions, and potentially death. Liquid argon can cause frostbite; eye contact can cause inflammation.
First Aid Measures: Skin contact: Seek medical treatment if frostbite occurs. Eye contact: Lift the eyelid and flush with running water or saline for at least 15 minutes. Seek medical attention. Inhalation: Quickly move to a fresh air area. Keep the airway clear. If breathing is difficult, administer oxygen. If breathing stops, perform artificial respiration immediately. If breathing and heartbeat stop, perform artificial respiration and external chest compressions immediately.
在线联系供应商
Other supplier products
 |
Hardware powder | Introduction Accurate selection of powder has always been a problem for the powder industry. To solve this problem, we name the powder accordi... |
 |
Powder coating for construction machinery | Introduction Engineering machinery is an important part of the equipment industry. Engineering machinery can be seen in major areas related to nat... |
 |
Scratching and Mar powder coating | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction Scratching, Abrasion and Mar Outside appearance is directly associated wit... |
 |
Household electrical appliances powder coating | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Characteristics of powder coatings “It does not contain toxic, solvent free, or v... |
 |
Dicyandiamide Cured Epoxy Powder Coating | WA：+86 132 6275 2056 WEB: std-coatings.com Product Overview Dicyandiamide Cured Epoxy Powder Coating is a thermoset coating system designed to... |
Same products
 |
Core Drill Bits For Stone | 卖方: Hebei XMF Tools Group Co., Ltd | Our Core Drill Bits for Stoneare designed for professional cutting and drilling of granite, marbl... |
 |
Uphone L181 4G Rugged PoC Radio Entry Level IP68 | 卖方: Shenzhen Tianlong Century Technology Development CO., LTD | Uphone L181 4G Rugged PoC Radio Entry Level IP68 Uphone L181 4G Rugged PoC Radio – Entry-L... |
 |
Hot Melt Adhesive for Vacuum Insulation Panels | 卖方: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Vacuum Insulation Panels Supply & Technical Support Capabilities ... |
 |
Hot Melt Adhesive for Packaging | 卖方: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Packaging Bond Strength & Durability: Hot melt adhesives provide i... |
 |
Hot Melt Adhesive for Hygiene Products | 卖方: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Hygiene Products refers to thermoplastic pressure‑sensitive adhesives ... |
