Leveling agent STD-236N
Composition: Polyether modified silicone oil
Appearance: light yellow viscous liquid
Active ingredient: 100%
Solvent: None
Application range:
Can be applied to all solvent-based systems, water-soluble systems and light-curing systems, etc.
Leveling Agent STD-236N Technical Data Sheet
| Category | Specifications |
|---|---|
| Product Name | Leveling Agent STD-236N |
| Chemical Type | Polyacrylate copolymer |
| Appearance | Clear yellowish liquid |
| Active Content | 50±2% |
| Solvent | Propylene glycol methyl ether |
| Density (25°C) | 1.02-1.05 g/cm³ |
| Viscosity (25°C) | 200-400 mPa·s |
| Flash Point | 38°C (PM) |
| Key Performance | Characteristics |
|---|---|
| Surface Tension | 24-26 mN/m (0.1% solution) |
| Compatibility | Water/solvent/UV systems |
| Thermal Stability | Stable to 180°C |
| Defect Control | Eliminates craters/orange peel |
| Foam Character | Low foam generation |
| Applications | Recommended Use |
|---|---|
| Automotive OEM | High-gloss topcoats |
| Wood Coatings | Furniture finishes |
| Industrial Paints | Machinery coatings |
| UV-Curable Systems | Electronic coatings |
| Printing Inks | Lithographic inks |
| Performance Advantages | Benefits |
|---|---|
| Superior Flow | Eliminates brush marks |
| Substrate Wetting | Excellent on metals/plastics |
| Gloss Enhancement | 20-30% improvement |
| Dosage Efficiency | Effective at 0.2-1.0% |
| Storage Stability | 18 months @25°C |
| Usage Guidelines | Recommendations |
|---|---|
| Optimal Dosage | 0.3-0.8% by weight |
| Addition Point | Let-down phase |
| Mixing | Moderate agitation |
| Storage Temp | 5-35°C |
| Shelf Life | 24 months |
| Safety & Compliance | Standards |
|---|---|
| Flash Point | 38°C (PM) |
| VOC Content | 420 g/L |
| Regulatory Status | REACH compliant |
| GHS Classification | Not hazardous |
| PPE Requirements | Safety glasses |
| Technical Comparison | STD-236N | Silicone Alternatives |
|---|---|---|
| Surface Smoothness | Excellent | Good |
| Recoatability | No issues | Potential problems |
| Foam Tendency | Low | Moderate-high |
| Cost Efficiency | 30% better | Standard |
| Yellowing | None | Possible |
References:
Product Technical Bulletin (2024Q3)
European Coatings Journal – “Advances in Leveling Technology” (2023)
在线联系供应商
Other supplier products
 |
HS OT 20 CAS 9035-99-8 | 9035-99-8 –Names and Identifiers Name Insoluble sulfur Synonyms Insoluble sulfurinsoluble sulfurPolymeric sulfurSulfur, homopol... |
 |
Polyester based powder coating White | Product Description MT-MA220G is a polyester based powder coating, formulated without TGIC and is designed for exterior exposure offering excellen... |
 |
4-acryloylmorpholine CAS 5117-12-4 | Introduction CAS NO. 5117-12-4Molecular formula: C7H11NOAppearance: Colorless or pale yellow transparent liquidContent: 98%minColor code: 30APHA m... |
 |
CAS 1823-59-2 | Introduction 4.4 ‘-oxybis-phthalic anhydride is a white to white powder organic substance that can be used to make polyimide resins. Applic... |
 |
Methylated Melamine Resin | Introduction This category of products mainly consists of methanol and hydroxymethyl melamine reacting in different molar ratios to form highly me... |
Same products
 |
Core Drill Bits For Stone | 卖方: Hebei XMF Tools Group Co., Ltd | Our Core Drill Bits for Stoneare designed for professional cutting and drilling of granite, marbl... |
 |
Uphone L181 4G Rugged PoC Radio Entry Level IP68 | 卖方: Shenzhen Tianlong Century Technology Development CO., LTD | Uphone L181 4G Rugged PoC Radio Entry Level IP68 Uphone L181 4G Rugged PoC Radio – Entry-L... |
 |
Hot Melt Adhesive for Vacuum Insulation Panels | 卖方: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Vacuum Insulation Panels Supply & Technical Support Capabilities ... |
 |
Hot Melt Adhesive for Packaging | 卖方: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Packaging Bond Strength & Durability: Hot melt adhesives provide i... |
 |
Hot Melt Adhesive for Hygiene Products | 卖方: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Hygiene Products refers to thermoplastic pressure‑sensitive adhesives ... |
