EPDM rubber compound
It has excellent aging resistance such as ozone resistance, heat resistance, weather resistance, etc. It can be widely used in automotive parts, waterproof materials for construction, wire and cable sheaths, heat-resistant hoses, tapes, automotive seals and other fields.
| Category | Details |
|---|---|
| Composition | –Base Polymer: Ethylene Propylene Diene Monomer (EPDM, ENB/DCPD types) |
| –Reinforcing Fillers: Carbon black (30–60 phr), silica (10–30 phr) | |
| –Plasticizers: Paraffinic oils (10–20 phr) | |
| –Curing Agents: Sulfur/accelerators (1–3 phr) or peroxide (DCP) | |
| Physical Properties | –Hardness (Shore A): 50–85 (ASTM D2240) |
| –Tensile Strength: 7–18 MPa (ASTM D412) | |
| –Elongation at Break: 300–700% (ASTM D412) | |
| –Density: 1.1–1.3 g/cm³ | |
| Thermal Resistance | –Service Temperature: -40°C to +150°C (intermittent 175°C) |
| –Thermal Stability: <10% weight loss at 150°C (24h, ASTM D573) | |
| Chemical Resistance | –Resistant To: Ozone, UV, weathering, polar solvents, and alkalis |
| –Limitations: Hydrocarbon oils, fuels, and halogenated compounds | |
| Key Applications | –Automotive: Weatherstripping, radiator hoses, and brake components |
| –Construction: Roofing membranes, expansion joints, and sealants | |
| –Electrical: Cable insulation and surge arresters | |
| –Appliances: Gaskets and vibration dampers | |
| Processing | –Mixing: Two-roll mill (20–30 min, 50–70°C) or internal mixer |
| –Molding: Compression/injection molding (160–200°C, 5–15 MPa) | |
| –Curing: Post-cure (170°C, 2–4h) for optimal compression set | |
| Safety & Compliance | –MSDS: Non-flammable (flash point >250°C); avoid inhalation/skin contact |
| –Regulatory: REACH, RoHS, and UL 94 (flammability) | |
| Storage | –Conditions: Dry, <30°C, away from UV/ozone; shelf life 12–18 months |
| –Packaging: Polyethylene-lined bags (prevent contamination) | |
| Quality Control | –Testing: Mooney viscosity (ML 1+4. ASTM D1646), compression set (ASTM D395) |
| –Certifications: ISO 9001 (manufacturing), ASTM D2000 (standard classification) |
在线联系供应商
Other supplier products
 |
Talcum Powder Fintarque M05N | GENERAL INFORMATION Talcum Powder Fintarque M05N is a hydrated magnesium silicate with chemical formula of Mg3Si4O10(OH)2. Finntalc grades are pu... |
 |
Acrylic transparent powder coating | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product description This series of products is made of acrylic resin and hardener t... |
 |
Automotive Powder Coating | We are a leading Chinese powder coating factory with over 20 years of export experience, supplying high-quality coatings to automotive manufacturer... |
 |
Powder coatings for Automotive trim parts | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product Description MT-A2201 powders can be used for pillars and appliqués, ... |
 |
Polyester based powder coating MT-JA010G White | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product Description MT-JA010G is a polyester based powder coating, formulated using TGI... |
Same products
 |
Epimedium Extract | 卖方: Fruit Powder,Vegetable Powder | Product Name: Epimedium ExtractLatin Name: Epimedium Sagittatum Maxim.Specification: Icariin 5%, ... |
 |
Pumpkin Powder | 卖方: Fruit Powder,Vegetable Powder | Product Name: Pumpkin PowderLatin Name: Cucurbita pepo L.Used Part: FruitAppearance: yellow fine ... |
 |
Broccoli Powder | 卖方: Fruit Powder,Vegetable Powder | Product Name: Broccoli powder Latin Name: Brassica oleracea L.var.italic Planch. Used Part: Who... |
 |
Pomegranate Powder | 卖方: Fruit Powder,Vegetable Powder | Product Name: Pomegranate PowderLatin Name: Punica granatum linn.Used Part: Fruit juiceAppearance... |
 |
Orange Powder | 卖方: Fruit Powder,Vegetable Powder | Product Name: Orange PowderLatin Name: Citrus sinensisUsed Part: Fruit juiceAppearance: Light yel... |
