.

Hydrogenated nitrile rubber compound

Hydrogenated nitrile rubber has good oil resistance (good resistance to fuel oil, lubricating oil, and aromatic solvents), good ozone resistance, heat resistance, excellent chemical corrosion resistance (good resistance to Freon, acid, and alkali), and high resistance to compression permanent deformation. At the same time, hydrogenated nitrile rubber also has high strength, high tearing performance, and excellent wear resistance. It is one of the rubbers with excellent comprehensive performance.

CategoryDetails
Composition –Base Polymer: Hydrogenated Nitrile Butadiene Rubber (HNBR)
–Reinforcing Fillers: Carbon black (40–60 phr), silica (10–30 phr)
–Plasticizers: Phthalate/adipate esters (5–15 phr)
–Curing Agents: Sulfur/accelerators (0.5–3 phr) or peroxide (DCP)
Physical Properties –Hardness (Shore A): 60–95 (ASTM D2240)
–Tensile Strength: 15–35 MPa (ASTM D412)
–Elongation at Break: 200–500% (ASTM D412)
–Density: 1.1–1.3 g/cm³
–Abrasion Resistance: <150 mm³ (ASTM D5963. Taber Wear)
Thermal Resistance –Service Temperature: -40°C to +150°C (intermittent 175°C)
–Thermal Stability: <10% weight loss at 175°C (24h, ASTM D573)
Chemical Resistance –Resistant To: Mineral oils, hydraulic fluids, H2S, and ozone
–Limitations: Strong acids, polar solvents (e.g., acetone), and ketones
Key Applications –Automotive: Seals, gaskets, and timing belts (engine/transmission)
–Oil & Gas: Wellhead seals, drilling tools, and O-rings
–Aerospace: Fuel-resistant hoses and vibration dampers
–Industrial: Roller coatings and chemical-processing equipment
Processing –Mixing: Internal mixer (20–40 min, 50–70°C) or two-roll mill
–Molding: Compression/injection molding (160–200°C, 10–25 MPa)
–Curing: Post-cure (180°C, 2–8h) for optimal compression set
Safety & Compliance –MSDS: Non-flammable (flash point >250°C); avoid inhalation/skin contact
–Regulatory: REACH, RoHS, and API 6A (oilfield equipment)
Storage –Conditions: Cool (<25°C), dry, away from UV/ozone; shelf life 12–24 months
–Packaging: Polyethylene-lined bags (prevent moisture absorption)
Quality Control –Testing: Mooney viscosity (ML 1+4. ASTM D1646), compression set (ASTM D395)
–Certifications: ISO 9001 (manufacturing), API Q1 (oil & gas)

在线联系供应商

至: Standard International Group (HK) Limited
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

xoutdoor furniture Powder coating
xoutdoor furniture Powder coating Getaquote whats/app:+86 132 6275 2056 WEB: std-coatings.com Product Description Powder coating for outdoor leisure furniture has excellent decorati...
Thermosetting flat powder coating
Thermosetting flat powder coating Product Introduction MT thermosetting flat powder coating adopts advanced polymer formula technology to form a dense and smooth coating through hi...
Pure epoxy powder coating series
Pure epoxy powder coating series Getaquote whats/app:+86 132 6275 2056 WEB: std-coatings.com Introduction: Made of epoxy resin and curing agent as the main raw materials. Features:...
Functional Material Powder Coatings
Functional Material Powder Coatings Getaquote whats/app:+86 132 6275 2056 WEB: std-coatings.com 1. Targeted Solutions for Industrial Challenges Functional powder coatings address indu...
Polyester based powder coatings MT-620 AM
Polyester based powder coatings MT-620 AM Product Description MT-620 AM is a series of polyester based powder coatings, formulated without the use of TGIC, designed for the exterior enviro...
供应产品

Same products

5.4,4'-Oxydiphenol CAS 1965-09-9
5.4,4'-Oxydiphenol CAS 1965-09-9 卖方: Yufeng International Group Co., Ltd Product Name: 4,4'-Oxydiphenol Synonyms: 4,4'-Dihydroxydiphenyl ether 4,4'-Oxydiphenol Bis(4-...
1,1,2,2-Tetrachloroethane CAS 79-34-5
1,1,2,2-Tetrachloroethane CAS 79-34-5 卖方: Yufeng International Group Co., Ltd Product Name: 1, 1, 2, 2-Tetrachloroethane Synonyms: 79-34-5 s-Tetrachloroethane Acetylene te...
3.Chlorotrifluoroethylene (CTFE) CAS 79-38-9
3.Chlorotrifluoroethylene (CTFE) CAS 79-38-9 卖方: Yufeng International Group Co., Ltd Synonyms: CHLOROTRIFLUOROETHYLENE 79-38-9 CTFE Chlorotrifluoroethene 1-Chloro-1,2,...
2.1,1,2-Trichloroethane CAS 79-00-5
2.1,1,2-Trichloroethane CAS 79-00-5 卖方: Yufeng International Group Co., Ltd Product Name: 1, 1,2-Trichloroethane CAS: 79-00-5 Synonyms:79-00-5, Vinyltrichloride, beta-...
1.1,1,2,2-Tetrachloroethane CAS 79-34-5
1.1,1,2,2-Tetrachloroethane CAS 79-34-5 卖方: Yufeng International Group Co., Ltd Product Description Product Name: 1, 1, 2, 2-Tetrachloroethane Synonyms: 79-34-5 s-Te...