Epoxy Powder Coating
Introduction
The main components are epoxy resin and curing agent.
Brief description
It is mainly composed of epoxy resin and curing agent.
Features
- Excellent mechanical properties (impact resistance, hardness, toughness, adhesion, etc.)
- Good coating surface effect.
- Strong corrosion resistance.
- Good insulation.
Application areas
Mechanical and electrical equipment, safes, industrial equipment, pipelines, steel wires, chemical laboratory equipment and other anti-corrosion fields.
Product series
Standard curing type and low temperature curing type are available.
Can be made into various glosses and colors.
Can be made into hot melt epoxy.
Technical parameters
Powder performance
Specific gravity: 1.1~1.8g/cm³
Mechanical properties
| Test items | Test standards | Performance indicators |
|---|---|---|
| Pencil hardness | GB/T6739-1996 | >2H |
| Adhesion | GB/T9286-1998 | Grade 0 |
| Bending | GB6742-86 | Φ3mm |
| Impact | GB/T1732-93 | 50kg.cm |
| Cupping | GB9753-88 | >6mm |
Corrosion resistance
| Test items | Test standards | Performance indicators |
|---|---|---|
| Salt spray resistance | GB/T1771-91 | No change in coating after 1000 hours, unilateral corrosion at scratches <2mm |
| Moisture and heat resistance | GB/T1740-79 | Slight gloss loss after 1000 hours, ≤1 level |
Note: The above parameters are laboratory data and are for reference only. The actual indicators are related to factors such as customer environment, equipment, materials, pretreatment, and spraying process.
Application conditions
Pretreatment: phosphating, chromating, sandblasting
Coating: Suitable for corona electrostatic spraying, friction electrostatic spraying, electrostatic fluidized bed spraying, fluidized bed dipping
Curing conditions:
200℃ at 10 minutes.
180℃ at 15 minutes.
Can also be designed according to customer needs.
Drinking water product certification
British WRA5 standard..
US NSF61 standard.
German KTW/W270 standard.
Drinking water valve testing standards: BS/EN14901. ANSI/NSF61.
Packaging
Carton packaging, net weight 20kg/box.
Lined with double-layer polyethylene plastic bags.
Storage conditions
Store in a dry and ventilated room below 30℃.
Avoid direct sunlight.
Under this condition, the powder can be stably stored for 6 months.
Safety and health
- All raw materials of powder coatings do not contain toxic substances.
- No toxic gas is released during baking.
- Avoid inhalation of dust during use.
- Operators should wear dust masks.
- Minimize long-term contact between skin and powder.
- Paint attached to the skin can be washed with soap.
If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
在线联系供应商
Other supplier products
 |
3-Layer Polyethylene (FPE) Anti-Corrosion Epoxy Powder Coating | Product Introduction:This product is formulated using epoxy resin and phenolic epoxy resin, designed and manufactured according to GB/T 23257-2009.... |
 |
Filled Polytetrafluoroethylene (PTFE) Powder Coating | We manufacture and export a complete range of Polytetrafluoroethylene (PTFE) coatings directly from China, serving industrial B2B clients across el... |
 |
Powder coating for construction machinery | Introduction Engineering machinery is an important part of the equipment industry. Engineering machinery can be seen in major areas related to nat... |
 |
MDF (Medium density fiberboard) powder coating | Introduction Due to the good application prospects and advantages of MDF powder coating technology itself (see attached table), it has long been o... |
 |
Weather-resistant powder coating for coils | Introduction Conventional liquid coil coatings were successfully developed and applied in the late 1950s and early 1960s. To date, almost all pre-... |
Same products
 |
Easy-cleaning Silicone-Modified Waterborne UV Resin | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | LUV533 is a high-performance, silicone-modified hexafunctional waterborne UV resinengineered to d... |
 |
Water-based Soft-Touch Resin for Consumer Electronics | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | Water-based Soft-Touch Resinis an advanced coating material formulated to deliver a luxurious, ve... |
 |
Conformal Coatings | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | The conformal coatingsprovide good adhesion to metal, PCB and other substrates after curing at ro... |
 |
Metalized & Laser Transfer coating | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | Metallized and laser transfer coatingsare designed with sustainability in mind, ensuring minimal ... |
 |
Hydrophilic coatings for Air Conditioner | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | A water-based coating combination applied on the surface of aluminum foil, which forms a layer wi... |
