Polyamide
Typical Characteristics
| Typical Characteristics | |
| Nature | Polyamide |
| Appearance | Off-white micronized powder |
| Solid Content (%) | 100 |
| Active Content(%) | 100 |
| Specific gravity | 0.98 |
| Bulk density | 0.4-0.6 |
| Melting Point(°C) | 121 |
| Particle size distribution | Dv.1 min: 1.5 um/ Dv.9 max: 15.0 um |
Description
Polyamide is a pure polyamide especially recommended in 2K epoxy primers for its robustness. Polyamide is a micronised amide wax rheology modifier offering very good recoatability for ambient curing solvent-based epoxy coatings.Polyamide has been designed to overcome those difficulties which exist with older type organo-wax rheology modifiers e.g. seeding, false-body and migration of readily dissolved species to the surface. Consequently, when used in strong solvent systems, coatings formulated using Polyamide offer an enhanced performance and very good recoatability.
Recommended addition level
0.2-1.5% under heat and shear
Standard Packaging
Other packaging may be available upon request- 15 Kg Bag
Handling & Storage
It should be stored in the original containers in a dry place at temperatures between 5°C (41°F) and 30°C (86°F). Avoid exposure to direct sunlight or frost. In these conditions, this product should be used within 48 months from delivery.
Processing instructions
The use of high-speed dispersers is ideal for the incorporation and activation of Polyamide in that they develop both the necessary level of shear andtemperature.Polyamide is best added along with the initial charge of resin during the pigment dispersion and grind stage. Efficient activation will be achieved by allowing the temperature during dispersion to rise to 45 – 65°C (113 – 149°F), but more preferably from 55 – 65°C (131 -149°F), and maintaining this condition of dispersion and temperature for 20 – 30 minutes.The activation process constitutes the conversion of the Polyamide particles to an interacting network of fibre-like particles. It is this network that gives rise to the final coating’s shear thinning rheology. This shear thinning characteristic provides a very high viscosity under the low shear rates associated with sedimentation, and a low viscosity at the much higher application shear rates. The net result is excellent control of sedimentation combined with ease of application.Immediately following application, where low shear conditions again predominate, the coating’s viscosity undergoes a time dependent recovery as the network reestablishes itself. This time dependence is known as thixotropy and enables the final coating to attain verygood levelling and sag resistance.
Health and environmental data
For safe handling please refer to the Safety Data Sheet.For more informationabout health and environmental data, please contact us.
If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
在线联系供应商
Other supplier products
 |
High temperature powder HTP600 | Introduction Accurate selection of powder has always been a problem for the powder industry. To solve this problem, we name the powder accordi... |
 |
Epoxy Anti-Corrosion Powder Coating for Firefighting Pipes | Product Introduction: This product is formulated using linear phenolic epoxy resin, polyurethane-modified epoxy resin, and advanced curing agents,... |
 |
Silver Gray Color Matte Powder Coating | Surface Finish Options Overview Powder type Epoxy-Polyester, Polyester Applications Exterior Industrial, Specialized Finish type Smooth Co... |
 |
Weather-resistant powder coating for coils | Introduction Conventional liquid coil coatings were successfully developed and applied in the late 1950s and early 1960s. To date, almost all pre-... |
 |
Gray Color Matte Powder Coating | Surface Finish Options Overview Powder type Epoxy-Polyester, Polyester Applications Exterior Industrial, Specialized Finish type Smoo... |
Same products
 |
Hot Melt Adhesive for Vacuum Insulation Panels | 卖方: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Vacuum Insulation Panels Supply & Technical Support Capabilities ... |
 |
Hot Melt Adhesive for Packaging | 卖方: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Packaging Bond Strength & Durability: Hot melt adhesives provide i... |
 |
Hot Melt Adhesive for Hygiene Products | 卖方: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Hygiene Products refers to thermoplastic pressure‑sensitive adhesives ... |
 |
LSAW Steel Pipe & Tube | 卖方: HEBEI TIRICO PIPELINE CO.,LTD | LSAW Steel Pipe & Tube , or Longitudinal Submerged Arc-Welding Pipe (also known as SAWL ... |
 |
Anti-Corrosion Steel Pipe & Tube | 卖方: HEBEI TIRICO PIPELINE CO.,LTD | Anti-Corrosion Steel Pipe & Tube Anti-Corrosion Steel Pipe & Tube What Is an Anti... |
