Powder coatings for brake calipers MT-A1243 /MT-BW104GF / MT-301.727S
Product Description
MT-A1243 for brake components combines toughness and durability with excellent corrosion and chemical resistance. They also come in a range of colors to meet the varied design needs for brake pads, brake discs, calipers and other wheel hardware that is visible in an open wheel design.
Powder properties
| Chemical Type | Epoxy |
| Area of usage | Brake calipers |
| Apprearance | Smooth, glossy |
| Colour | Anthracite metallic |
| Gloss (60°) | 75 ± 5 GU |
| Density (g/cm3) | 1.55 ± 0.05 |
| Stoving schedule | 10 minutes at 180°C (time at object temperature) |
| Application | Electrostatic |
| StorageStability | Under dry, cool (<25°C) conditions, at least 12 months from production date |
Test Conditions
The results are based on mechanical and chemical tests which (unless otherwise indicated) have been carried out under laboratory conditions and are given for guidance only. Actual product performance will depend upon the circumstances under which the product is used.
| Substrate | Steel panels |
| Pretreatment | Bonder (WH/60/OC) iron phosphate |
| Film thickness | 70 µm |
| Cure schedule | 10 minutes at 180°C |
Mechanical Tests
| Adhesion | DIN EN ISO 2409 | Gt 0 |
| Erichsen cupping | DIN EN ISO 1520 | ≥ 4 mm |
Pre-treatment
Steel surfaces to be coated must be clean and free from grease. For maximum protection it is essential to pre-treat components prior to the application of MT-A1243. Iron Phosphate and Zinc Phosphate of ferrous metals improve corrosion resistance.
Application
MT-A1243 powders can be applied by manual or automatic electrostatic spray equipment. It is recommended that for consistent application and appearance product be fluidized during application. Unused powder can be reclaimed using suitable equipment and recycled through the coating system.
If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
在线联系供应商
Other supplier products
 |
Industrial Protective Wear-resistant Powder Coating | High-Performance Chlorinated Polyether (CPE) Powder Coatings Direct-from-Factory Manufacturing | Global B2B Solutions We manufacture and supply h... |
 |
Polyester based powder coatings MT-620 AM | Product Description MT-620 AM is a series of polyester based powder coatings, formulated without the use of TGIC, designed for the exterior enviro... |
 |
Orange Peel Powder Coating | We are a trusted powder coating manufacturer specializing in Orange Peel Powder Coating with full customization options. Based in China, we offer h... |
 |
Metallic flat semi-gloss MT-019/93010 | Introduction No. MT-019/93010 Color Metallic color Surface Metallic flat semi-gloss System Weather-resistant polyeste... |
 |
Low Cure Powder Coating – Energy-Saving Custom Solutions | Most powder coating chemistries required relatively high curing temperatures ranging from 350-400°F (177-204°C) for 5-20 minutes (substrate... |
Same products
 |
Easy-cleaning Silicone-Modified Waterborne UV Resin | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | LUV533 is a high-performance, silicone-modified hexafunctional waterborne UV resinengineered to d... |
 |
Water-based Soft-Touch Resin for Consumer Electronics | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | Water-based Soft-Touch Resinis an advanced coating material formulated to deliver a luxurious, ve... |
 |
Conformal Coatings | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | The conformal coatingsprovide good adhesion to metal, PCB and other substrates after curing at ro... |
 |
Metalized & Laser Transfer coating | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | Metallized and laser transfer coatingsare designed with sustainability in mind, ensuring minimal ... |
 |
Hydrophilic coatings for Air Conditioner | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | A water-based coating combination applied on the surface of aluminum foil, which forms a layer wi... |
