Powder coatings for brake calipers MT-A1243 /MT-BW104GF / MT-301.727S
Product Description
MT-A1243 for brake components combines toughness and durability with excellent corrosion and chemical resistance. They also come in a range of colors to meet the varied design needs for brake pads, brake discs, calipers and other wheel hardware that is visible in an open wheel design.
Powder properties
| Chemical Type | Epoxy |
| Area of usage | Brake calipers |
| Apprearance | Smooth, glossy |
| Colour | Anthracite metallic |
| Gloss (60°) | 75 ± 5 GU |
| Density (g/cm3) | 1.55 ± 0.05 |
| Stoving schedule | 10 minutes at 180°C (time at object temperature) |
| Application | Electrostatic |
| StorageStability | Under dry, cool (<25°C) conditions, at least 12 months from production date |
Test Conditions
The results are based on mechanical and chemical tests which (unless otherwise indicated) have been carried out under laboratory conditions and are given for guidance only. Actual product performance will depend upon the circumstances under which the product is used.
| Substrate | Steel panels |
| Pretreatment | Bonder (WH/60/OC) iron phosphate |
| Film thickness | 70 µm |
| Cure schedule | 10 minutes at 180°C |
Mechanical Tests
| Adhesion | DIN EN ISO 2409 | Gt 0 |
| Erichsen cupping | DIN EN ISO 1520 | ≥ 4 mm |
Pre-treatment
Steel surfaces to be coated must be clean and free from grease. For maximum protection it is essential to pre-treat components prior to the application of MT-A1243. Iron Phosphate and Zinc Phosphate of ferrous metals improve corrosion resistance.
Application
MT-A1243 powders can be applied by manual or automatic electrostatic spray equipment. It is recommended that for consistent application and appearance product be fluidized during application. Unused powder can be reclaimed using suitable equipment and recycled through the coating system.
If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
在线联系供应商
Other supplier products
 |
Yellow Wrinkle Color Powder Coating | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction Product Detail Texture Wrinkle Color RAL and PANTONE or cu... |
 |
Normal temperature coating | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product introduction Used for solar back panels, building exterior walls, steel str... |
 |
MDF (Medium density fiberboard) powder coating | Introduction Due to the good application prospects and advantages of MDF powder coating technology itself (see attached table), it has long been o... |
 |
MDF Powder Coating | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com This product is made of special formula and production process for medium density fiber... |
|
|
Bonding Metallic Powder Coating | Advantage (Compare with normal metallic powder ): 1.The metallic pigment can be better melt with bottom powder, which will not jam the spray gun w... |
Same products
 |
Procaine | 卖方: 862043 | CAS:59-46-1 |
 |
High Concentration Plastic Color Masterbatch Factory Direct Supply | 卖方: 861445 | We are a professional color masterbatch manufacturer with years of R&D experience in plastic ... |
 |
Acid Ink Blue G Factory | 卖方: TIANJIN LEADING IMPORT & EXPORT CO., LTD | Acid Ink Blue G Factory 【Application of Acid Ink Blue G 】 mainly used for making blue or ... |
 |
Acid Black ATT Factory | 卖方: TIANJIN LEADING IMPORT & EXPORT CO., LTD | Acid Black ATT Factory 【What’s Acid Black ATT】 is made of acid black 10B and acid o... |
 |
Acid Black 10B Factory | 卖方: TIANJIN LEADING IMPORT & EXPORT CO., LTD | Acid Black 10B Factory is mainly suitable for dyeing and printing wool ,silk and nylon fabri... |
