.

Powder coatings for coil springs and torsion bars

Product Description

MT-A1242 powder coating has an excellent line of coatings for coil springs, and torsion bars essential to the safe performance and comfortable ride of today’s car and truck chassis systems. MT-A1242’s single layer systems offer unyielding performance in corrosion and chip resistance balanced with excellent application efficiencies. Our patented Super Single Coat for coil springs offers superior corrosion protection and critical chip resistance to bring you the most economical and responsible choices in coatings for high performance, high tensile springs.

Powder properties

Chemical Type Epoxy
Area of usage Automotive suspension springs
Appearance Smooth
Gloss level (60°) >40 GU
Colour Black
Recommended Film Thickness 330 – 380 µm (13 – 15 mils)
Density (g/cm3) 1.41 ± 0.05 (calculated) 0.9 – 1.2 (measured, cured film)
Gel time (at 200 °C) 36 – 54sec
Application Electrostatic
Storage Under dry, cool (<21°C) conditions
Shelf life 10 months from the production date
Curing schedule

(at object temperature)

25 minutes at 150°C (time at object temperature)

25 minutes at 300°F (time at object temperature)

Mechanical Tests

Adhesion DIN EN ISO 2409 Gt 0
Pencil Hardness TSH1539G B
Erichsen cupping DIN EN ISO 1520 ≥ 8 mm
Impact resistance DIN EN ISO 6272 ≥ 140 ip (direct)

≥ 140 ip (reverse)

Test Conditions

Testing has been determined under laboratory conditions using the following application properties and is for guidance only.

Substrate Steel panels CRS ACT B958 P90
Pretreatment Zinc Phosphate
Film thickness 330 – 380 µ (13 – 15 mils)
Cure schedule 20 minutes at 160°C

Actual film performance will depend on the individiual circumstances in which the product is used.

Pre-treatment

Steel surfaces to be coated must be clean and free from grease. For maximum protection it is essential to pre-treat components prior to the application of MT-A1242. Iron Phosphate and Zinc Phosphate of ferrous metals improve corrosion resistance.

Application

MT-A1242 powders can be applied by manual or automatic electrostatic spray equipment. It is recommended that for consistent application and appearance product be fluidized during application. Unused powder can be reclaimed using suitable equipment and recycled through the coating system.


在线联系供应商

至: Standard International Group (HK) Limited
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Super weather-resistant polyester powder coating/power coatings
Super weather-resistant polyester powder coating/power coatings Brief description This series of products is based on saturated carboxyl polyester resin and TGIC curing agent as the main base material. It is a ...
Blue flash silver color powder coating
Blue flash silver color powder coating COLORS AVAILABLE RAL colors coating powder Pantone colors Color-matching regarding customer requirement is available GENERAL TYPES Polyester /...
Metallic sand texture matte MT-019/91274
Metallic sand texture matte MT-019/91274 Introduction No. MT-019/91274 Color Metallic color Surface Metallic sand texture matte System Weather-resistant polye...
Blue Sand Texture Powder Coating
Blue Sand Texture Powder Coating What is Powder Coating? Powdercoating is a new type of 100% solid powder coating which does not contain solvents. With no solvent, no pollution, e...
Epoxy Powder Coating
Epoxy Powder Coating Main Features: Pollution-free Low melt viscosity Strong and durable coating Good leveling properties No need for a primer coating Excellent m...
供应产品

Same products

5.4,4'-Oxydiphenol CAS 1965-09-9
5.4,4'-Oxydiphenol CAS 1965-09-9 卖方: Yufeng International Group Co., Ltd Product Name: 4,4'-Oxydiphenol Synonyms: 4,4'-Dihydroxydiphenyl ether 4,4'-Oxydiphenol Bis(4-...
1,1,2,2-Tetrachloroethane CAS 79-34-5
1,1,2,2-Tetrachloroethane CAS 79-34-5 卖方: Yufeng International Group Co., Ltd Product Name: 1, 1, 2, 2-Tetrachloroethane Synonyms: 79-34-5 s-Tetrachloroethane Acetylene te...
3.Chlorotrifluoroethylene (CTFE) CAS 79-38-9
3.Chlorotrifluoroethylene (CTFE) CAS 79-38-9 卖方: Yufeng International Group Co., Ltd Synonyms: CHLOROTRIFLUOROETHYLENE 79-38-9 CTFE Chlorotrifluoroethene 1-Chloro-1,2,...
2.1,1,2-Trichloroethane CAS 79-00-5
2.1,1,2-Trichloroethane CAS 79-00-5 卖方: Yufeng International Group Co., Ltd Product Name: 1, 1,2-Trichloroethane CAS: 79-00-5 Synonyms:79-00-5, Vinyltrichloride, beta-...
1.1,1,2,2-Tetrachloroethane CAS 79-34-5
1.1,1,2,2-Tetrachloroethane CAS 79-34-5 卖方: Yufeng International Group Co., Ltd Product Description Product Name: 1, 1, 2, 2-Tetrachloroethane Synonyms: 79-34-5 s-Te...