Insulating Powder Coating
Product Features:
High electrical insulation properties, with a large resistance coefficient and low dielectric constant, meeting the requirements for general enameled wire and electronic component encapsulation.
Capable of rapid low-temperature curing and can also utilize residual heat curing (for heat-resistant components).
Excellent adhesion and flexibility, with good moisture resistance, anti-aging properties, thermal stability, flame retardancy, and adjustable color options.
Edge coverage greater than 30%, with a breakdown voltage greater than 40KV/mm.
Resistant to heat, wear, water, acids, alkalis, and salts; the coating is continuous and smooth, with a very dense texture.
For large and heavy components, fluidized bed preheating and residual heat curing are recommended.
Product Parameters：
| Item | Quality Indicator | Test Method |
|---|---|---|
| Appearance | Uniform color, loose without lumps, dry powder flowability 120-140 mm | Visual inspection |
| Color | As per customer requirements | Combination of colorimeter and visual inspection |
| Adhesion | Cross-cut test (ISO 2409. GB/T 9286-1998) | 0 level, excellent |
| Impact Resistance | Impact tester (drop weight method) (ISO 6272. GB/T 1732-1993) | Good performance at 50 kg.cm |
| Flexibility | Bending test instrument (ISO 1519. GB 6742-1986) | 3 mm, excellent flexibility |
| Cupping Test | ISO 1520. GB/T 9753-1993 | Pass at 8 mm |
| Surface Hardness | Pencil hardness (Mitsubishi pencil) (ASTM D3363. GB/T 6739-1996) | 1H |
| Electrical Insulation | Breakdown voltage greater than 40KV/mm | Excellent |
| Humidity Resistance | ISO 6270. GB/T 1740-1979 | Over 1000 hours |
| Salt Spray Test | ISO 7253. GB/T 1771-1991 | Over 1000 hours |
Application Fields:
Motor casings
Motor stators and rotors
Instruments
Small transformers
Electronic components
If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
在线联系供应商
Other supplier products
 |
PVC Powder Coatings | We offer a full range of PVC (Polyvinyl Chloride) powder coatings, tailored for furniture, construction, electrical insulation, chemical protection... |
 |
Dark gray wrinkle powder coating | Powder type Epoxy-Polyester, Polyester Applications Exterior Industrial, Specialized Finish type Textured Color standard: RAL RAL colors: RA... |
 |
Powder coating series for vehicle compartment | Introduction With the development of environmental protection and energy conservation, the central environmental protection department and local g... |
 |
Metallic plane MT-629/93627 | Introduction No. MT-629/93627 Color Black Surface Metallic plane System Resin imported from Austria Packing Spec... |
 |
High Transfer Efficiency (HTE) Powder/custom powder coating service | With exceptional adhesion and strength, HTE powder coatings are engineered to electrostatically wrap around and penetrate deep recesses and angles ... |
Same products
 |
Trimellitic anhydride 97% | 卖方: Yufeng International Group Co., Ltd | Trimellitic anhydrideis a 2-benzofuran compound having oxo groups at the 1- and 3-positions and a... |
 |
Isobutyric Anhydride CAS 97-72-3 | 卖方: Yufeng International Group Co., Ltd | Product Name: Isobutyric Anhydride CAS No.: 97-72-3 Purity: 99% Molecular Formula: C6H10O3 Mo... |
 |
Isobutyric Acid CAS 79-31-2 | 卖方: Yufeng International Group Co., Ltd | Product Name:ISOBUTYRIC ACID Synonyms: 2-Methylpropanoic acid 79-31-2 Isobutanoic acid 2-Met... |
 |
2-Amino-2-methyl-1-propanol（AMP）CAS：124-68-5 | 卖方: Yufeng International Group Co., Ltd | AtYufeng, a trusted 2-Amino-2-methyl-1-propanol Factory & Supplier, we prioritize quality and... |
 |
Dimethyl sulfoxide (DMSO) CAS: 67-68-5 | 卖方: Yufeng International Group Co., Ltd | Yufengis one of the leading dimethyl sulfoxide suppliers and also a professional such manufacture... |
