.

Metal bonding powder

Metal bonding powder
供应商: Standard International Group (HK) Limited

供应产品
在线联系供应商

Introduction

Accurate selection of powder has always been a problem for the powder industry. To solve this problem, we name the powder according to the industry’s requirements for powder coatings. We select materials for different industries and make corresponding adjustments to the process to better match the industry’s requirements. We provide customers with high-quality and low-cost products that are easy to use.

Product name Metal bonding powder
Applicable industries Building materials, aluminum art, previously used metal paint industry.
Powder specific gravity 1.1-1.5ɡ/cm³
Product features
  • High metal content, close to paint effect.
  • High binding rate, easy spraying construction, good paint film color consistency.
  • Excellent alkali resistance, weather resistance and corrosion resistance.
Physical properties Bending ASTM D522 Passed-curvature diameter is 5mm.
GB/T1731 Passed-curvature diameter is 2mm.
Dry adhesion ASTM D3359 Passed-result is 5B.
ISO 2409 Passed-result is 0 grade.
GB/T9286 Passed-result is 0 grade.
Cupping ISO 1520 Passed 5mm-No cracking or shedding of coating.
GB/T9753 Passed 5mm-No cracking or shedding of coating.
Impact resistance (positive impact) ASTM D2794 ≥50kg.cm
GB/T9753 50kg.cm
Pencil hardness (scratch hardness) ASTM D3363 ≥H
GB/T6739 ≥H
Storage stability 12 months (less than 30℃ environment). Re-test after expiration. If it meets the requirements, it can be used at will.
Curing process 200℃/12min, 180℃/15min (workpiece surface temperature).
Pretreatment All metal substrates need to be degreased and degreased, iron metals are treated with zinc or iron phosphating and aluminum chromium to improve corrosion resistance.
Coating
  • Manual or automatic spraying equipment can be used. To ensure the consistency of the coating, automatic spraying equipment is recommended.
  • Unsprayed powder can be recycled through an appropriate recycling system.
  • Atomizing air pressure ∽0.5 bar Primary air ∽0.5 bar, spraying voltage 40-90kv.
Damage repair Surface treatment: Grinding + air cleaning.

Application: Recoating mode,reduce spraying voltage.
Safety Warning
  • When spraying, do not eat, drink or smoke, and avoid inhalation of dust.
  • Wear a suitable breathing mask.
  • For more information, please ask the salesperson for the material safety data sheet of the specific product for reference.
Disclaimer Important note: The information provided in this table cannot be comprehensive and is based on current laws and current knowledge. Anyone who intends to use the product in areas other than those recommended in this table without first obtaining written confirmation from us of the product’s suitability will bear the consequences. It is the user’s unshirkable responsibility to take necessary measures to meet local legal and regulatory requirements. Please continue to read the material safety data sheet and technical parameter sheet of our products when you have time. We try our best to ensure that all the instructions for our products (in or outside the table) are correct, but we cannot fully control the quality or condition of the substrate and the many factors that may affect the use of the product. Therefore, unless we specifically confirm in writing, we do not assume any responsibility for loss of product performance and any other loss or damage caused by the use of the product. All products and technical recommendations we provide are subject to our standard terms and conditions of sale. Please obtain a copy of this document and read it carefully. The content of this table will be supplemented and improved as we accumulate experience and update policies. Before using the product, the user should verify whether the data in this table is the latest.

If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.


在线联系供应商

至: Standard International Group (HK) Limited
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

yellow orange glossy powder coating
 yellow orange glossy powder coating Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Powder type Epoxy, Epoxy-Polyester, Polyester, Polyurethane Applications Exterior Indus...
Colorful metal powder
 Colorful metal powder Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Magic color metal powder coating This series of products is made of special materials s...
Green Series Powder Coating
 Green Series Powder Coating Introduction We deliver a wide range of green series powder coatings manufactured in China and trusted by global industrial buyers. Why Our Green...
Metallic sand texture matte MT-049/7C130
 Metallic sand texture matte MT-049/7C130 Introduction No. MT-049/7C130 Color Gray Surface Metallic sand texture matte System Polyester Scope of applicati...
2-Hydroxyethanesulphonic acid
 2-Hydroxyethanesulphonic acid WA：+86 132 6275 2056
供应产品

Same products

Procaine
 Procaine 卖方: 862043 CAS:59-46-1
High Concentration Plastic Color Masterbatch Factory Direct Supply
 High Concentration Plastic Color Masterbatch Factory Direct Supply 卖方: 861445 We are a professional color masterbatch manufacturer with years of R&D experience in plastic ...
Acid Ink Blue G Factory
 Acid Ink Blue G Factory 卖方: TIANJIN LEADING IMPORT & EXPORT CO., LTD Acid Ink Blue G Factory 【Application of Acid Ink Blue G 】 mainly used for making blue or ...
Acid Black ATT Factory
 Acid Black ATT Factory 卖方: TIANJIN LEADING IMPORT & EXPORT CO., LTD Acid Black ATT Factory 【What’s Acid Black ATT】 is made of acid black 10B and acid o...
Acid Black 10B Factory
 Acid Black 10B Factory 卖方: TIANJIN LEADING IMPORT & EXPORT CO., LTD Acid Black 10B Factory is mainly suitable for dyeing and printing wool ,silk and nylon fabri...