Epoxy-polyester powder coating MT-APA EL286A/MT- EL286A

Product Description

MT-APA is an epoxy-polyester powder coating primer especially designed for direct application on substrates that are sensitive to out-gassing, such as Hot Dip Galvanized steel, Metal spraying, Zamak, Cast steel, Aluminium, brass etc. MT-APA offers excellent flow, chemical and salt spray resistance, and resistance to mechanical damage. MT-APA is suitable for use as a primer for a variety of liquid topcoats, however it is recommended that pre-qualification tests for intercoat adhesion be carried out prior to use

Powder Properties

Appearance	Smooth
Chemical type	Epoxy-Polyester
Color	Grey
Recommended Film Thickness (µm)	50 – 80 µm
Density (g/cm3)	1.68 ± 0.03 g/cm³
Application	Electrostatic
Storage	Under dry, cool (≤ 25°C) conditions
Shelf life	24 months below 25ºC

Pretreatment

For optimum coating performance the following pre-treatment is recommended prior to the application of MT-APA. The pre-treatment should be used in accordance with the supplier’s recommendations.

a) Aluminium Multistage chrome chromate or chrome phosphate

b) Galvanised Steel Multistage zinc phosphate or chromate

c) Steel Multistage zinc or iron phosphate

Application

MT-APA is suitable for corona electrostatic spraying. Tribo application is not recommended.

Recommended film thickness	50-80 µm, good protection is linked with the recommended film thickness.
Recycling	Unused powder can be reclaimed using suitable equipment and recycled through the coating system, but a minimum of 70% new powder should be used.

Note: Failure to comply with the recommended curing conditions may affect the adhesion of the topcoat and cause degradation of the system performance properties. Parts coated with MT-APA should not be handled if possible. If handling is unavoidable, clean lint-free gloves must be worn.

If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.

Other supplier products

	Gray Matte Powder Coating	Surface Finish Options Overview Key attributes ItemsInformation CAS No. 53808-41-6 Place of Origin China Main Raw Materi...
	Fitness Equipment Powder	Introduction It is made of polyester resin and epoxy resin as the main base materials, and has the excellent decorative, mechanical properties and...
	Modified acrylic copolymer emulsion STD-20135	Introduction STD 20135 is a modified acrylic copolymer emulsion with excellent substrate adhesion and excellent sealing properties, especially sui...
	Sand-textured powder coatings	Introduction Sand-textured powder coatings are a unique type of finish that provide a distinctive, tactile surface with a granular or sandy appear...
	Shallow autumn thin gauze gold powder coating	Product Features With a special skin feel formula, the surface of the coating after powder solidification has a touch similar to that of the skin,...

供应产品

Same products

	Easy-cleaning Silicone-Modified Waterborne UV Resin	卖方: Guangzhou Human New Material Science and Technology Co., Ltd	LUV533 is a high-performance, silicone-modified hexafunctional waterborne UV resinengineered to d...
	Water-based Soft-Touch Resin for Consumer Electronics	卖方: Guangzhou Human New Material Science and Technology Co., Ltd	Water-based Soft-Touch Resinis an advanced coating material formulated to deliver a luxurious, ve...
	Conformal Coatings	卖方: Guangzhou Human New Material Science and Technology Co., Ltd	The conformal coatingsprovide good adhesion to metal, PCB and other substrates after curing at ro...
	Metalized & Laser Transfer coating	卖方: Guangzhou Human New Material Science and Technology Co., Ltd	Metallized and laser transfer coatingsare designed with sustainability in mind, ensuring minimal ...
	Hydrophilic coatings for Air Conditioner	卖方: Guangzhou Human New Material Science and Technology Co., Ltd	A water-based coating combination applied on the surface of aluminum foil, which forms a layer wi...