High durability powder coatings MT-800 AM
Product Description
MT-800 AM is a series of high durability powder coatings designed for exterior exposure. Tested against the most severe specifications MT-800 gives significantly improved gloss retention and resistance to colour change. MT-800 AM powders are available in a wide range of colours and gloss levels and can be custom matched to the user’s requirements.MT-800 AM is a high-quality powder coating designed to meet decorative and functional demands of your specifications. Test results have proven reduction of bacteria and mold up to 99.9%.
Powder Properties
| Chemical Type | PolyesterTGIC |
| Particle Size | Suitable for electrostatic spray |
| Specific Gravity | 1.2-1.7 g/cm³ depending on colour and effect |
| Storage | Dry cool conditions below 25°C |
| Shelf Life | 12 months |
| Stoving Conditions
(at object temperature) |
15 minutes at 190°C
10 minutes at 200°C 8 minutes at 210°C |
Mechanical Tests
| Adhesion (2mm Crosshatch) | ISO2409 | Gt 0 |
| Erichsen Cupping | ISO1520 | Depends on shade |
| Hardness (4000gms) | ISO 1518 | Pass – no penetration to substrate |
| Impact | BS6496 | Depends on shade |
| Flexibility (Conical Mandrel) | ISO6860 | Depends on shade |
Pre-treatment
For maximum protection it is essential to pretreat components for exterior use prior to the application of MT-800. Aluminium components should receive a full multi-stage chromate conversion coating to clean and condition the substrate. Detailed advice should be sought from the pretreatment supplier. Galvanised steel also requires multi-stage pretreatment using either zinc phosphate or chromate conversion. Degassing of galvanised steel prior to powder application is considered mandatory – follow the procedural advice of the pretreatment supplier. MT-800 products may also be used on other substrates (eg. mild steel fabrications) for internal applications; nevertheless zinc phosphate pretreatment is regarded as essential.
Application
MT-800 AM powders can be applied by manual or automatic electrostatic spray equipment. Unused powder can be reclaimed using suitable equipment and recycled through the coating system.
If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
在线联系供应商
Other supplier products
 |
Sand texture matte MT-049/82951 | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/82951 Color Black Surface Sand textu... |
 |
Antimicrobial and Antiviral Powder Coating | WA：+86 132 6275 2056 WEB: std-coatings.com Product Introduction: This product is formulated using special resins, curing agents, and specializ... |
|
|
Metallic flat matte MT-019/74639 | Introduction No. MT-019/74639 Color Gray Surface Metallic flat matte System Weather-resistant polyester Scope of... |
 |
Polyurethane waterproof coating A STD-939 | Product Description The polyurethane prepolymer has a high resin content with excellent ratio of NCO, which can form a highly dense and elastic wa... |
 |
Thermosetting Decorative Powder Coating | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com I. Product Introduction Thermosetting decorative powder coating is a new generation... |
Same products
 |
Procaine | 卖方: 862043 | CAS:59-46-1 |
 |
High Concentration Plastic Color Masterbatch Factory Direct Supply | 卖方: 861445 | We are a professional color masterbatch manufacturer with years of R&D experience in plastic ... |
 |
Acid Ink Blue G Factory | 卖方: TIANJIN LEADING IMPORT & EXPORT CO., LTD | Acid Ink Blue G Factory 【Application of Acid Ink Blue G 】 mainly used for making blue or ... |
 |
Acid Black ATT Factory | 卖方: TIANJIN LEADING IMPORT & EXPORT CO., LTD | Acid Black ATT Factory 【What’s Acid Black ATT】 is made of acid black 10B and acid o... |
 |
Acid Black 10B Factory | 卖方: TIANJIN LEADING IMPORT & EXPORT CO., LTD | Acid Black 10B Factory is mainly suitable for dyeing and printing wool ,silk and nylon fabri... |
