Fluorocarbon powder
Powder coatings are also called 4E products because of their environmental protection, energy saving, safety, and economy.
1. Product type analysis:
| Product name | Type | Product description | Standard | Weathering life |
|---|---|---|---|---|
| PCNH | Super Weathering | Made of special super weathering resin, inorganic ceramic pigment and special additives, used for outdoor high-end weathering products | AAMA2603-02 | >10Y |
| PCNF | modified fluorocarbon | The fluorocarbon powder, which is a combination of fluorine-modified, stable bond-modified super-weather-resistant resin and inorganic special pigments, has the characteristics of super weather resistance, high hardness, water cleaning resistance, acid, alkali and salt resistance. | AAMA2604-05 | >15Y |
| PVDF | fluorocarbon | It is developed with 70% fluorocarbon and special pigment fillers, and has the characteristics of high hardness, easy cleaning, solvent resistance, acid, alkali and salt resistance, anti-aging, high weather resistance, etc., commonly known as the “king of coatings”. | GB/T23443-2009 AAMA2605-05 | >20Y |
| FEVE | thermosetting fluorocarbon | 70% fluorine content, belongs to thermosetting fluorocarbon powder coating, and the production process and cost are relatively high. | AAMA2605-05 | >20Y |
2. Fluorocarbon powder construction process:
1) Pre-treatment requirements:
Aluminum parts need to be chromized or passivated before spraying fluorocarbon powder coatings, so that the product can achieve the best performance after spraying.
2) Spraying parameter range:
The distance between the electrostatic gun and the workpiece is 120-180mm, the voltage is 40-80KV, and the current is 10-20uA. Due to the differences between various electrostatic spray guns, it is recommended that the atomization parameters and powder output be adjusted according to the needs of the site.
3) Product parameters:
Curing temperature: 235±5℃ (actual heating temperature of the workpiece)
Curing time: 15-20min
3. Comparison between fluorocarbon powder and fluorocarbon paint:
| SafetyProject | Liquid fluorocarbon coating | Powder fluorocarbon coating |
|---|---|---|
| Coating equipment | Liquid coating line | Powder coating line |
| Solvent use | 70% solvent | Solvent-free |
| Coating use rate | 35-60% | 95-100% |
| Energy consumption | Very large | Small |
| Environmental protection | A large amount of organic solvents evaporate, which is harmful to the environment | Environmental protection, VOC emissions are infinitely close to 0 |
| Safety | Flammable and explosive, unsafe | Very high safety |
| Cost | High cost | Low cost |
| Coating composition | 70% PVDF content | Same as liquid coating |
| Weather resistance | Meets AAMA2605 standard | Same as liquid coating |
| Hardness | Softer | Very high |
| Abrasion resistance | Good | Very good |
| Usage license | Required | Required |
| Flatness | Very good | Similar to liquid coating |
| Application performance | Liquid fluorocarbon coating Powder | fluorocarbon coating |
|---|---|---|
| Substrate | Aluminum substrate, epoxy primer substrate, zinc-rich substrate | Same as liquid coating |
| Pretreatment | Pre-treat the surface to make it meet AAMA2605 | Same as liquid coating |
| Film thickness | Two coatings: 30~40um; multiple coatings: above 40um | 50~80um |
| Curing treatment | 232~249℃PMT(10~20min) | Same as liquid coating |
| Utilization rate | ~50% | ~100% |
| Environmental protection | A large amount of harmful solvents evaporate, waste liquid and waste residue | No volatile solvents |
| Solvents | A large amount of solvents are required | No solvents |
| Color difference | The color difference is affected by process changes | The color difference is slightly affected by process changes |
| Solid content | about 40% | 100% |
| Gloss (60°) | 15~35° | 15~60° |
| Pencil hardness | ≥F | ≥2H |
| Abrasion resistance | Friction coefficient 555±10 | Slightly higher |
| Solvent resistance | MEK rubs back and forth 100 times | Same as liquid coating |
| Wet/dry paint adhesion | The film does not peel off after removing the tape | Same as liquid coating |
| Salt spray resistance 1000h | The line becomes bare metal 1/32 inch | Same as liquid coating |
| Gloss retention | Accelerated aging test according to AAMA2605 standard, gloss retention 50% | Same as liquid coating |
| Color retention/powdering | According to AAMA2605 standard, color difference ≤5. powdering rate ≥8 | Same as liquid coating |
4. Naming and display of related products:
| Product name | Type | Series naming | Particle size |
|---|---|---|---|
| PCNH | Super weather-resistant | permanent series~No 1 | 34~38um |
| PCNF | Modified fluorocarbon | permanent series~No 2 | 28~36um |
| PVDF | Fluorocarbon | permanent series~No 3 | 28~36um |
| FEVE | Thermosetting fluorocarbon | permanent series~No 4 | 28~36um |
5. Application scope:
Suitable for walls or steel structures with super weather resistance requirements and landmark buildings, widely used in protective coatings such as exhibition centers, government buildings, bridges, etc. Applicable to various outdoor metal products: such as metal curtain wall aluminum profiles, open-air stadium seats, ceiling material coatings, sports equipment outdoor lamps, industrial equipment, auto parts, etc.
6. Testing standards
AAMA2603
| Serial number | Test item | Test method | Required index |
|---|---|---|---|
| 1 | Powder particle size | Particle size analyzer | ≤10um ≤10% DV50 34~38um |
| 2 | Coating appearance/color/color difference | AAMA2603 | Observe surface defects at 3 meters and 900. The color is within the agreed range. |
| 3 | Film thickness | AAMA2603 | 80% of the local film thickness ≥20um; local film thickness ≥17 um |
| 4 | Gloss (60°) | AAMA2603 | ±5 units |
| 5 | Dry film adhesion | AAMA2603 | Cross-cut spacing 1mm, no boiling water adhesion |
| 6 | Pencil hardness | AAMA2603 | ≥1.MinimumH |
| 7 | Impact test | AAMA2603 | 18N·M, (3±0.3)mm, same as standard test panel |
| 8 | Neutral smoke test (NSS) | AAMA2603 | NSS 1000h Minimum rating of seven，Minimum blister of eight |
| 9 | Moisture and heat resistance | AAMA2603 | 380C，100%RH，1500h |
| 10 | Weather resistance | AAMA2603 | Xenon lamp 1000h Florida ≥1 year |
If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
在线联系供应商
Other supplier products
 |
Decorative powder coating series | Product Overview This series of products includes epoxy, hybrid, polyester, polyurethane and other systems, designed to meet the needs of variou... |
|
|
Anti-Corrosion Powder Coatings for Pipelines | Introduction Product SegmentationApplication Fields Single-Layer Epoxy Powder Coating Buried long-distance pipelines Dual-Layer E... |
 |
Camo Powder Coating | Introduction We are a professional powder coating manufacturer in China, specializing in custom camouflage powder coatings for diverse industries.... |
|
|
Sand-textured powder coatings | Introduction Sand-textured powder coatings are a unique type of finish that provide a distinctive, tactile surface with a granular or sandy appear... |
 |
Flat matte MT-629/7A549 | Introduction No. MT-629/7A549 Color Gray Surface Flat matte System Super weather-resistant polyester Scope of ap... |
Same products
 |
蓝翠鸟威尼斯灰泥涂料 墙面艺术灰泥 奢华质感 | 卖方: 中山蓝翠鸟新型环保材料有限公司 | 产品概述 蓝翠鸟威尼斯灰泥是商业空间与艺术场馆优选的艺术涂装材料，以精选天然石膏、环保水性成膜物质为原料，肌理独特且富有层次感，耐擦洗、易维护，适配商业展厅墙面、艺术画廊展墙、高端餐厅主题墙面... |
 |
蓝翠鸟天鹅绒纹理漆 室内设计高级感墙面装饰漆 | 卖方: 中山蓝翠鸟新型环保材料有限公司 | 产品概述 这是一款为空间注入情绪的涂料。天鹅绒般柔和的哑光表面，拥有安抚视觉和心灵的效果，能自然营造出宁静、安全、包裹感的氛围。特别适用于打造家庭阅读角、私人工作室、瑜伽室或任何您需要放松... |
 |
蓝翠鸟 水包砂 | 高弹抗裂 外墙专用涂料 | 卖方: 中山蓝翠鸟新型环保材料有限公司 | 产品概述 蓝翠鸟高弹抗裂水包砂，专为应对墙体细微开裂问题而设计。其涂层具备优异的弹性与延展性，能有效桥接并遮盖基层微裂缝，适用于易产生温度应力或轻微沉降的建筑外墙，提供持久的完美外观。 ... |
 |
蓝翠鸟 简修天鹅绒覆盖漆 | 旧墙翻新神器 遮盖涂料 | 卖方: 中山蓝翠鸟新型环保材料有限公司 | 产品概述 厌倦了老旧的墙面？蓝翠鸟简修天鹅绒漆是您的快速翻新方案。它拥有超强的遮盖力和附着力，能直接覆盖大多数旧墙面（如乳胶漆、腻子层），简化施工步骤。快速赋予老旧空间全新的天鹅绒质感与现... |
 |
商业空间用瓷砖胶——高效施工、耐磨耐用 | 卖方: 中山蓝翠鸟新型环保材料有限公司 | 产品概述 瓷砖胶是适用于商场、酒店、写字楼等商业空间的专业粘结材料，以优质水泥、级配石英砂、特种聚合物改性剂为原料，采用薄贴工艺实现高效贴砖，提升施工效率，且具备优异耐磨性，可承受高人流量磨损... |
