Antistatic powder coating

Introduction:

Made of antistatic materials, suitable for indoor and outdoor environments

Features:

The volume resistivity of the coating is as low as 106-1010 Ω· cm, which prevents the accumulation of static electricity on the surface of the equipment and protects the equipment.

It can resist static electricity for a long time.

Use:Suitable for coating and protection of the surface of electrical appliances and equipment to reduce static electricity accumulation.

Application parameters:

Curing time:200℃×10–15 minutes

Spraying method:High voltage electrostatic spraying 60-80 KV

Recommended film thickness:60-80 um

Physical properties:

Item	Instrument	Standard	Test method
Pencil hardness	Pencil hardness tester	≥ H	GB/6739
Impact resistance	Impact tester	≥ 50 kg.cm	GB/T 1732
Bending resistance	Bending tester	≤ 2mm	GB/T 6742
Adhesion	100 grid test	Level 0	GB/T 9286
Cup protrusion	Cup protrusion tester	≥ 6 mm	GB/T9753
Chemical properties:
Salt spray resistance	≥ 500 Hs	≥ 9 levels	GB/T 1771
Moisture and heat resistance	≥ 1000 Hs	Slight gloss loss	GB/T 1740
Weather resistance (outdoor products)	Artificial accelerated aging QUV-B313 240h	≥ 3 levels	GB/T 1865

The above tests all use 0.8mm degreased and derusted cold-rolled steel plates, with a coating thickness of 40 to 80um. The performance indicators of the coating will vary slightly with the gloss.

This product does not contain heavy metals such as arsenic, selenium, lead, hexavalent chromium, mercury, antimony, cadmium, etc., and meets RoHS requirements.

Storage conditions:Store in a dry, ventilated room at around 25°C, avoid direct sunlight. Under this condition, the powder can be stored for 6-12 months. If it is overdue, it can be re-tested and can still be used if the results meet the requirements.

Note:The test indicators mentioned in this report are all data obtained from laboratory tests and are for reference only, not as a performance commitment for product application. The results may vary depending on environmental factors and other conditions.

If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.

Other supplier products

	Premium Silver Powder Coating	Are you struggling with metal surfaces that fade, scratch, or corrode too quickly? Many B2B clients face challenges finding a silver coating that n...
	Polyester Clear Powder Coatings	This series of product are made of polyester resin (as hardener) and highly transparentmaterials. There are two types of products are suitable for ...
	Sand-Textured 3D Wood Grain Powder	Introduction Sand-textured 3D wood grain powder is a specialized coating that replicates natural wood texture with a sandy, matte finish and a thr...
	Antimicrobial Powder Coatings	PRODUCT FEATURES Product performance: long term Up to 4N- 5N (99.99-99 .999%) Application: kitchen utensils: dishwasher, stove, cupboard, etc ...
	Tricresyl Phosphate MT-T306	Product details Reference dosage: 0.5-3.0 (mass fraction) / % Quality standard: Appearance ​Clear oily liqui...

供应产品

Same products

	Sucralose powder Food additive	卖方: Shanghai Yifu Food Ingredients Co., Ltd	Sucralose, as a new generation of high-sweetness sweetener, has demonstrated comprehensive and ou...
	Sucralose Purchase price	卖方: Shanghai Yifu Food Ingredients Co., Ltd	Sucralose, as a high-sweetness, calorie-free, and highly stable artificial sweetener, enjoys wide...
	Sucralose Partners, long-termCooperation	卖方: Shanghai Yifu Food Ingredients Co., Ltd	Sucralose is currently a widely used high-potency sweetener globally. Its safety has been verifie...
	Sucralose	卖方: Shanghai Yifu Food Ingredients Co., Ltd	Sucralose is a high-sweetness agent obtained by replacing the hydroxyl groups at positions 4, 1',...
	Sucralose	卖方: Shanghai Yifu Food Ingredients Co., Ltd	Sucralose is a trichloro derivative of sucrose (4,1',6'-trichloro-4,1',6'-dideoxy-galactosucrose)...