Antistatic powder coating
Introduction:
Made of antistatic materials, suitable for indoor and outdoor environments
Features:
The volume resistivity of the coating is as low as 106-1010 Ω· cm, which prevents the accumulation of static electricity on the surface of the equipment and protects the equipment.
It can resist static electricity for a long time.
Use:Suitable for coating and protection of the surface of electrical appliances and equipment to reduce static electricity accumulation.
Application parameters:
Curing time:200℃×10–15 minutes
Spraying method:High voltage electrostatic spraying 60-80 KV
Recommended film thickness:60-80 um
Physical properties:
| Item | Instrument | Standard | Test method |
| Pencil hardness | Pencil hardness tester | ≥ H | GB/6739 |
| Impact resistance | Impact tester | ≥ 50 kg.cm | GB/T 1732 |
| Bending resistance | Bending tester | ≤ 2mm | GB/T 6742 |
| Adhesion | 100 grid test | Level 0 | GB/T 9286 |
| Cup protrusion | Cup protrusion tester | ≥ 6 mm | GB/T9753 |
| Chemical properties: | |||
| Salt spray resistance | ≥ 500 Hs | ≥ 9 levels | GB/T 1771 |
| Moisture and heat resistance | ≥ 1000 Hs | Slight gloss loss | GB/T 1740 |
| Weather resistance (outdoor products) | Artificial accelerated aging QUV-B313 240h | ≥ 3 levels | GB/T 1865 |
The above tests all use 0.8mm degreased and derusted cold-rolled steel plates, with a coating thickness of 40 to 80um. The performance indicators of the coating will vary slightly with the gloss.
This product does not contain heavy metals such as arsenic, selenium, lead, hexavalent chromium, mercury, antimony, cadmium, etc., and meets RoHS requirements.
Storage conditions:Store in a dry, ventilated room at around 25°C, avoid direct sunlight. Under this condition, the powder can be stored for 6-12 months. If it is overdue, it can be re-tested and can still be used if the results meet the requirements.
Note:The test indicators mentioned in this report are all data obtained from laboratory tests and are for reference only, not as a performance commitment for product application. The results may vary depending on environmental factors and other conditions.
If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
在线联系供应商
Other supplier products
 |
Yellow High-gloss Powder Coating | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction High gloss powder coating is a kind of excellent performance coating, with... |
 |
V | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction Powder type Epoxy-Polyester, Polyester Applications Exterior Industrial, ... |
 |
Skin-Feel Powder Coating | Key Features & Specifications FeatureSpecification / Benefit Skin-Like Texture Coating surface replicatessoft, delicate touchakin ... |
 |
Functional Material Powder Coatings | Introduction 1. Targeted Solutions for Industrial Challenges Functional powder coatings address industry-specific needs where traditional coating... |
 |
EP-01W single-layer FBE powder coating for pipe exterior | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product details Applicable to the single-layer structure of steel pipe external coating... |
Same products
 |
Procaine | 卖方: 862043 | CAS:59-46-1 |
 |
High Concentration Plastic Color Masterbatch Factory Direct Supply | 卖方: 861445 | We are a professional color masterbatch manufacturer with years of R&D experience in plastic ... |
 |
Acid Ink Blue G Factory | 卖方: TIANJIN LEADING IMPORT & EXPORT CO., LTD | Acid Ink Blue G Factory 【Application of Acid Ink Blue G 】 mainly used for making blue or ... |
 |
Acid Black ATT Factory | 卖方: TIANJIN LEADING IMPORT & EXPORT CO., LTD | Acid Black ATT Factory 【What’s Acid Black ATT】 is made of acid black 10B and acid o... |
 |
Acid Black 10B Factory | 卖方: TIANJIN LEADING IMPORT & EXPORT CO., LTD | Acid Black 10B Factory is mainly suitable for dyeing and printing wool ,silk and nylon fabri... |
