Pure polyester transparent powder coating
Product Description
This series of products is made of polyester resin and hardener, and is made of high transparency materials.
Product Features
Excellent gloss and vividness, the coating is crystal clear;
High transparency and image clarity, accurately reflecting the base color;
Excellent leveling, highly smooth coating surface;
Long-term durability in harsh outdoor environments, maintaining the original color of the coating;
Good matching with a variety of paints and color powder coatings.
Application Areas
1. Designed for surface finishing of die-cast aluminum wheels, with ultra-high transparency and standard transparency;
2. Suitable as a high-performance finishing coating for various metal appliances, such as furniture metal tripods, bicycles, locks, door handles;
3. Suitable as a finishing protective layer for metal powder coatings
Transportation Packaging
Carton packaging, lined with two layers of polyvinyl chloride plastic bags, net weight of each box 20kg. Non-hazardous items can be transported in various ways, but should be kept away from direct sunlight, moisture and heat, and contact with chemicals.
Hygiene and safety
Operators should wear anti-sit masks during use to avoid inhaling dust and minimize long-term contact between skin and powder coating. Paint attached to the skin can be washed with soap.
Powder properties
| Specific gravity | 1.2~1.8g/cm |
| Particle size | Depending on the application, the standard type has an average particle size of 35~40 microns, less than 10 microns of powder <10%, more than 100 microns of powder <0.5%. |
| Storage stability | Polyester powder coatings should be stored in a dry, ventilated room below 35°C, and avoid direct sunlight. If stored in an air-conditioned room, the powder must be stored at room temperature or the same (temperature) as the spraying equipment before use to avoid moisture. Under this condition, the powder can be stably stored for more than 12 months. If it is exceeded, it must be re-tested. If the result meets the requirements, it can still be used. |
Coating properties
| Test items | Inspection standard or method | Inspection index |
| Appearance | Visual inspection | Various board surface effects |
| Impact | GB/T 1732 | ≥50Kg·cm |
| Bending | GB/T 6742 | ≤2mm |
| Cupping | GB/T 9753 | ≥8mm |
| Hardness | GB/T 6739 | ≥H~2H |
| Adhesion | GB/T 9286 | Level 0 |
| Neutral salt spray resistance | GB/T 1771 | 500h; Scribed area: unidirectional rust ≤2.0mm; Unscribed area: no abnormality |
| Moisture and heat resistance | GB/T 1740 | 500h No abnormality |
| Artificial weather aging resistance | GB/T 1865 | 800h; Discoloration ≤2 level; Gloss loss ≤2 level |
| The above coating performance indicators may decrease slightly as the gloss decreases. | ||
| Spraying | This series of products can be suitable for the following spraying methods: corona electrostatic spraying; friction electrostatic spraying; electrostatic fluidized bed spraying; fluidized bed hot dip coating. | |
| Coating thickness: between 40 and 150 microns, depending on the application requirements. | ||
| Curing conditions | Recommended 200℃/10 minutes, can also be designed according to user needs: 160℃/20 minutes, 180℃/10 minutes | |
If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
在线联系供应商
Other supplier products
 |
Metal powder coating | Product introduction “Paint to powder” special varieties, stable color, strong metal effect, good adhesion to metal substrate; Metal ... |
 |
Low Temperature Powder Coating Series | Key Features & Specifications FeatureSpecification / Benefit Low Temperature Curing 120°C × 20–30 mincuring proces... |
 |
Antistatic Polyethylene Powder Coating | 1. Key Advantages of PE Powder Coatings Our PE coatings are engineered to provide superior protection and a high-quality finish through various ap... |
 |
Powder coating for automobile wheel hub- Durable, Custom & OEM Supply | Introduction Standard automobile powder coating is mainly used for automobile parts, such as automobile engines, aluminum wheels, chassis, filters... |
 |
General industry powder coating | Brief description: Made of saturated polyester resin, epoxy resin or epoxy polyester mixed type as base material Features: Excellent physical an... |
Same products
 |
Trimellitic anhydride 97% | 卖方: Yufeng International Group Co., Ltd | Trimellitic anhydrideis a 2-benzofuran compound having oxo groups at the 1- and 3-positions and a... |
 |
Isobutyric Anhydride CAS 97-72-3 | 卖方: Yufeng International Group Co., Ltd | Product Name: Isobutyric Anhydride CAS No.: 97-72-3 Purity: 99% Molecular Formula: C6H10O3 Mo... |
 |
Isobutyric Acid CAS 79-31-2 | 卖方: Yufeng International Group Co., Ltd | Product Name:ISOBUTYRIC ACID Synonyms: 2-Methylpropanoic acid 79-31-2 Isobutanoic acid 2-Met... |
 |
2-Amino-2-methyl-1-propanol（AMP）CAS：124-68-5 | 卖方: Yufeng International Group Co., Ltd | AtYufeng, a trusted 2-Amino-2-methyl-1-propanol Factory & Supplier, we prioritize quality and... |
 |
Dimethyl sulfoxide (DMSO) CAS: 67-68-5 | 卖方: Yufeng International Group Co., Ltd | Yufengis one of the leading dimethyl sulfoxide suppliers and also a professional such manufacture... |
