.

MDF (Medium Density Fiberboard) Powder Coating

Product Description

This product is a powder coating suitable for medium density fiberboard substrate (MDF) coating produced by special formula and production process. The coating film has excellent mechanical properties and indoor decorative properties, and can be widely used in surface treatment of modern furniture industry. It is generally not recommended to be used directly for surface coating of various outdoor products.

Application Field

It can be widely used in surface treatment of modern furniture industry.

Product Features

  • The powder coating has high utilization rate during construction;
  • No three waste problems, in line with environmental protection requirements;
  • Compared with traditional spray painting and film pressing process, it has lower cost;
  • It has stronger adaptability to product switching than film pressing process, and can adopt large-scale industrial production methods;
  • The coating film has excellent physical and chemical properties;
  • Different coating film appearance effects can be designed.

Transport packaging

Carton packaging, lined with two layers of polyvinyl chloride plastic bags, net weight of each box is 20kg. Non-hazardous items can be transported in various ways, but should be avoided from direct sunlight, moisture and heat, and contact with chemicals.

Powder coating

Specific gravity 1.15~1.8g/cm° (depending on the color and gloss)
Particle size 100% less than 100 microns (can be adjusted according to the special requirements of the coating)
Powder fluidity 140-150
Construction process 1. ​​Electrostatic spray gun can be used for coating, and the film thickness is suitable to be controlled at 70-90 microns. (MDF substrate needs to be heated and homogenized in an infrared oven in advance and preheated. The specific heating temperature is determined according to the heat capacity of the MDF substrate.)
2. Curing conditions: 140℃, 5-8 minutes (referring to the surface temperature of the MDF board). The oven can use an ordinary hot air circulation oven or a drying tunnel. If conditions permit, it is best to use an infrared oven to quickly heat and level the newly sprayed coating, and then send it to an ordinary oven for baking and curing.

If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.


在线联系供应商

至: Standard International Group (HK) Limited
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Pure epoxy primer powder MT Plus -AL117N
Pure epoxy primer powder MT Plus -AL117N Product Description Pure epoxy primer powder MT Plus -AL117N is a powder primer protective barrier designed to give enhanced corrosion protection ...
Soft Coral Gold powder coating/Powder Paint Coating
Soft Coral Gold powder coating/Powder Paint Coating Product Features With a special skin feel formula, the surface of the coating after powder solidification has a touch similar to that of the skin,...
Red Powder Coatings
Red Powder Coatings Introduction We are a China-based manufacturer specializing in the production and export of a wide range of red series powder coatings, offering v...
Frame & chassis powder coatings MT-A400 series
Frame & chassis powder coatings MT-A400 series Product Overview: Weather-resistant pure polyester powder coatings designed for frame and chassis parts Coating characteristics: – High ...
Fluoropolymer Powder Coatings for B2B Projects
Fluoropolymer Powder Coatings for B2B Projects Why Choose Fluoropolymer Powder Coatings? Outstanding UV and Weather Resistance: Ideal for outdoor and long-term applications Excellent Chemical ...
供应产品

Same products

Hot Melt Adhesive for Vacuum Insulation Panels
Hot Melt Adhesive for Vacuum Insulation Panels 卖方: Foshan Rurga New Material Technology Co. ,Ltd Hot Melt Adhesive for Vacuum Insulation Panels Supply & Technical Support Capabilities ...
Hot Melt Adhesive for Packaging
Hot Melt Adhesive for Packaging 卖方: Foshan Rurga New Material Technology Co. ,Ltd Hot Melt Adhesive for Packaging Bond Strength & Durability: Hot melt adhesives provide i...
Hot Melt Adhesive for Hygiene Products
Hot Melt Adhesive for Hygiene Products 卖方: Foshan Rurga New Material Technology Co. ,Ltd Hot Melt Adhesive for Hygiene Products refers to thermoplastic pressure‑sensitive adhesives ...
LSAW Steel Pipe & Tube
LSAW Steel Pipe & Tube 卖方: HEBEI TIRICO PIPELINE CO.,LTD LSAW Steel Pipe & Tube , or Longitudinal Submerged Arc-Welding Pipe (also known as SAWL ...
Anti-Corrosion Steel Pipe & Tube
Anti-Corrosion Steel Pipe & Tube 卖方: HEBEI TIRICO PIPELINE CO.,LTD Anti-Corrosion Steel Pipe & Tube Anti-Corrosion Steel Pipe & Tube What Is an Anti...