EP hybrid powder coating

Product description

It is made of epoxy resin and polyester resin as the main raw materials, and has their own unique properties, so that the produced coating has excellent leveling, decorative, mechanical properties and strong corrosion resistance.

Application areas:

Widely used in the coating of various indoor metal products.

Physical properties:

1. Specific gravity: 1.2-1.8 (depending on color and gloss)

2. Storage: Below 35℃, in a dry environment, it can be stored for 12 months if the packaging is intact.

3. Packaging: 20 kg/box, carton packaging, lined with two layers of polyethylene inner bags.

Coating performance:

Spraying area	8-12 m2/Kg, film thickness 70μm (100% powder usage rate)
Adhesion	GB/T 9286	Grade 0
Impact	GB/T 1732	50cm
Cupping test	GB/T 9753	≥ 6 mm
Bending test	GB/T 6742	≤ 3 mm
Pencil hardness	GB/ 6739	≥ H
Salt spray test	GB/T 1771	1000 h passed
Moisture and heat resistance	GB/T 1740	1000 h passed

Application instructions:

Surface treatment: Treat according to the substrate and required performance

Spraying: Electrostatic gun or friction gun

Film thickness: 60-70 um

Curing conditions: Workpiece temperature/time: 180℃ x 15 minutes

Hygene & Safety:

This powder coating is a non-toxic product, but dust should be avoided during use. Operators are advised to wear appropriate dust masks and glasses. If possible, try to avoid long-term contact between skin and powder coating.

Safety & protection

All dust is irritating to the respiratory system, so avoid inhaling dust and steam generated during curing. Take measures to avoid skin contact. If contact is necessary, wash the skin with water and soap. If contact with the eyes is necessary, wash immediately with clean water and seek medical attention in time. Ash layer and powder particle deposition should be avoided on the surface and dead corners. Tiny organic particles will be ignited and explode under static electricity. All equipment must be grounded to prevent static electricity.

If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.

Other supplier products

	Cresyl diphenyl phosphate (CDP)	Product Details Cresyldiphenylphosphate(​CDP) Alias:Crelyl diphenyl phosphate; Phenyl methyl phenyl phosphate; Flame retardant ...
	Low Temp Cure&Environment friendly Polyester Powder Coatings	Feature: -Good adhesion and good mechanical properties -Good flowing and glossy -Good chemical resistance and corrosion resistance -Over 120um ...
	High Transfer Efficiency (HTE) Powder	Introduction With exceptional adhesion and strength, HTE powder coatings are engineered to electrostatically wrap around and penetrate deep recess...
	Light Green Matte Powder Coating	Powder type Epoxy-Polyester, Polyester Applications Exterior Industrial, Specialized Finish type Smooth Color standard：RAL RAL colors：RAL Cl...
	High Gloss PVC Powder Coating	1. Fluoropolymer Powder Coatings Fluoropolymer coatings are high-performance solutions engineered for the most demanding environments, offering a ...

供应产品

Same products

	Trimellitic anhydride 97%	卖方: Yufeng International Group Co., Ltd	Trimellitic anhydrideis a 2-benzofuran compound having oxo groups at the 1- and 3-positions and a...
	Isobutyric Anhydride CAS 97-72-3	卖方: Yufeng International Group Co., Ltd	Product Name: Isobutyric Anhydride CAS No.: 97-72-3 Purity: 99% Molecular Formula: C6H10O3 Mo...
	Isobutyric Acid CAS 79-31-2	卖方: Yufeng International Group Co., Ltd	Product Name:ISOBUTYRIC ACID Synonyms: 2-Methylpropanoic acid 79-31-2 Isobutanoic acid 2-Met...
	2-Amino-2-methyl-1-propanol（AMP）CAS：124-68-5	卖方: Yufeng International Group Co., Ltd	AtYufeng, a trusted 2-Amino-2-methyl-1-propanol Factory & Supplier, we prioritize quality and...
	Dimethyl sulfoxide (DMSO) CAS: 67-68-5	卖方: Yufeng International Group Co., Ltd	Yufengis one of the leading dimethyl sulfoxide suppliers and also a professional such manufacture...