EE pure epoxy powder coating

Product description

Made with epoxy resin as the main raw material, it has excellent chemical resistance and mechanical properties.

Application areas:

Suitable for coating metal products with high requirements for corrosion resistance, electrical insulation and flexibility. It is generally not recommended to be used directly for surface coating of various outdoor products.

Physical properties:

1. Specific gravity: 1.2-1.8 (depending on color and gloss)

2. Storage: Below 25℃, in a dry environment, it can be stored for 6 months if the packaging is intact.

3. Packaging: 15 kg/box, carton packaging, lined with two layers of polyethylene inner bags.

Coating performance:

Spraying area	8-12 m2/Kg, film thickness 70μm (100% powder usage rate)
Adhesion	GB/T 9286	Grade 0
Impact	GB/T 1732	50cm
Cupping test	GB/T 9753	≥ 6 mm
Bending test	GB/T 6742	≤ 3 mm
Pencil hardness	GB/ 6739	≥ H
Salt spray test	GB/T 1771	1000 h passed
Moisture and heat resistance	GB/T 1740	1000 h passed

Application instructions:

Surface treatment: Treat according to the substrate and required performance

Spraying: electrostatic gun or friction gun

Film thickness: 60-70 um

Curing conditions: Workpiece temperature/time: 140-200℃ x 15 minutes (depending on the specific product)

Health and safety:

This powder coating is a non-toxic product, but dust should be avoided during use. Operators are advised to wear appropriate dust masks and glasses. If possible, try to avoid long-term contact between skin and powder coating.

Safety and Protection

All dust is irritating to the respiratory system, so avoid inhaling dust and steam generated during curing. Take measures to avoid skin contact. If contact is necessary, wash the skin with water and soap. If contact with the eyes, wash immediately with clean water and seek medical attention in time. Avoid the deposition of dust and powder particles on the surface and dead corners. Tiny organic particles will ignite and explode under static electricity. All equipment must be grounded to prevent static electricity.

If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.

Other supplier products

	Profile powder	Introduction Accurate selection of powder has always been a problem for the powder industry. To solve this problem, we name the powder according t...
	Hyper-durable powder coatings	Powder Properties Appearance Smooth Matt Gloss level 20 – 30 gloss units (60°) Particle size Suitable for electrostat...
	Porcelain bamboo (green) MT-049/94945	Introduction No. MT-049/94945 Color Porcelain bamboo (green) Surface Flat metal System Polyester Scope of applic...
	Epoxy/Polyester Powder Coatings	Feature: -Good bond ability and mechanical performance -Smooth and glossy -Certified chemical resistance -Better heat resistance and light resi...
	Aromatic Solvent MT-P-2600	Introduction ProductName：Aromatic Solvent MT-P-2600CASNo.：64742-94-5H.S. Code：27075000 Specification Item Specifications TestMethod ...

供应产品

Same products

	Epimedium Extract	卖方: Fruit Powder,Vegetable Powder	Product Name: Epimedium ExtractLatin Name: Epimedium Sagittatum Maxim.Specification: Icariin 5%, ...
	Pumpkin Powder	卖方: Fruit Powder,Vegetable Powder	Product Name: Pumpkin PowderLatin Name: Cucurbita pepo L.Used Part: FruitAppearance: yellow fine ...
	Broccoli Powder	卖方: Fruit Powder,Vegetable Powder	Product Name: Broccoli powder Latin Name: Brassica oleracea L.var.italic Planch. Used Part: Who...
	Pomegranate Powder	卖方: Fruit Powder,Vegetable Powder	Product Name: Pomegranate PowderLatin Name: Punica granatum linn.Used Part: Fruit juiceAppearance...
	Orange Powder	卖方: Fruit Powder,Vegetable Powder	Product Name: Orange PowderLatin Name: Citrus sinensisUsed Part: Fruit juiceAppearance: Light yel...