Polyester powder coatings for indoor applications with antimicrobial technology MT-310 AM
Product description
MT-310 is a series of polyester resin based thermo-setting powder coatings, without TGIC with specific antimicrobial activity. The MT-310 resin system is warning label free. The pigments used in the MT-310 series restrict the field of application of this powder coatings class to interior uses. MT-310 AM is a high-quality powder coating designed to meet decorative and functional demands. Additionally, MT-310 AM uses antimicrobial technology to reduce the number of microbes such as bacteria and mold. Test results have proven a reduction of bacteria and mold up to 99.9%.
Powder properties
| Typical value | |
| Chemical Type | Polyester – TGIC Free |
| Density | 1.2 – 1.9 g/cm³, depending on colour and effect |
| Recommended film thickness | 60 – 90µm |
| Shelf life | 12 months below 30 ºC |
| Storage Conditions | Under dry, cool (≤ 30°C) conditions (open boxes must be resealed) |
| Curing schedule | 8-16 min at 200°C
10-20 min at 180°C 20-40 min at 170°C (at object temperature) |
Pre-treatment
Aluminium components should receive a full multi-stage chromate conversion coating or suitable chrome-free pre-treatment or suitable pre-anodising to clean and condition the substrate. Detailed advice should be sought from the pre-treatment supplier. Iron phosphate and particularly Zinc phosphating of ferrous metals improves corrosion resistance. Aluminium substrates may require a chromate conversion coating.
Application
Powders can be applied by manual or automatic electrostatic spray equipment. A good protection is linked with the recommended film thickness. All powders can show small color differences from batch to batch, this is normal and unavoidable. Bonded products have better application properties than blended products (more stable) but attention should still be paid to line settings in order to avoid “marble effect”and changes in aspect after recycling. Products with different codes should not be mixed even if same colour and gloss.
Test conditions
Actual product performance will depend upon the circumstances under which the product is used. Testing has been determined under laboratory conditions using the following application properties and is for guidance only.
| Pre-treatment | Zinc Phosphate |
| Substrate | Polished steel |
| Curing schedule | 12 min at 200°C (object temperature) |
| Film Thickness | 60 – 70µm |
Mechanical tests
| Typical value | Method/standard | |
| Adhesion | Class 0 | ISO 2409 (2 mm Crosshatch) |
| Erichsen cupping | Pass 5 mm | ISO 1520 |
| Flexibility | Pass 5 mm | ISO 1519 |
| Hardness | Pass – no penetration to substrate | ISO 1518-1 (2000g) |
| Impact resistance | ≥30 kg.cm | ISO 6272-2 (d/r) |
If you're ready to take the next step, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
在线联系供应商
Other supplier products
 |
Antistatic powder coating | Application parameters: Curing time:200℃×10–15 minutes Spraying method:High voltage electrostatic spraying 60-80 KV Recommended film... |
 |
Epoxy Anti-Corrosion Powder Coating for Safe Drinking Water Pipes | Product Introduction:This product is formulated using special epoxy resin, dedicated curing agents, nano-grade antimicrobial agents, and food-grade... |
 |
Yellow Wrinkle Color Powder Coating | Introduction Product Detail Texture Wrinkle Color RAL and PANTONE or customized Surface Finis... |
 |
Modified Chlorinated Polyether Powder Coating | High-Performance Chlorinated Polyether (CPE) Powder Coatings Direct-from-Factory Manufacturing | Global B2B Solutions We manufacture and supply h... |
 |
Building Materials Super Weather Resistant Powder | Powder characteristics With excellent weather resistance, it not only has the characteristics of environmental protection and super weather resist... |
Same products
 |
High Concentration Plastic Color Masterbatch Factory Direct Supply | 卖方: 861445 | We are a professional color masterbatch manufacturer with years of R&D experience in plastic ... |
 |
Acid Ink Blue G Factory | 卖方: TIANJIN LEADING IMPORT & EXPORT CO., LTD | Acid Ink Blue G Factory 【Application of Acid Ink Blue G 】 mainly used for making blue or ... |
 |
Acid Black ATT Factory | 卖方: TIANJIN LEADING IMPORT & EXPORT CO., LTD | Acid Black ATT Factory 【What’s Acid Black ATT】 is made of acid black 10B and acid o... |
 |
Acid Black 10B Factory | 卖方: TIANJIN LEADING IMPORT & EXPORT CO., LTD | Acid Black 10B Factory is mainly suitable for dyeing and printing wool ,silk and nylon fabri... |
 |
Sulphur Dyes | 卖方: TIANJIN LEADING IMPORT & EXPORT CO., LTD | Sulphur Dyes BuyDye supplies a range of sulphur dyes for cotton-based textile dyeing, includ... |
