Epoxy Anti-Corrosion Powder Coating for Coal Mine Gas Drainage Pipes
Product Introduction:
This product is formulated using phenolic epoxy resin and incorporates self-developed conductive polymers and conductive materials, combining the advantages of intrinsic and doped conductivity. It is specifically designed for conductive heavy-duty anti-corrosion powder coatings. The surface resistivity of the coating can reach below 10⁵ Ω, effectively eliminating static electricity accumulation in gas drainage pipes and preventing static sparks, thereby enhancing safety. The coating features high reactivity, strong adhesion, high cross-link density, and excellent resistance to chemicals, solvents, cathodic disbondment, as well as superior flexibility and impact resistance.
Product Features:
Excellent adhesion to the substrate.
Utilizes self-developed materials combining intrinsic and doped conductivity.
Good electrical conductivity of the coating, with surface resistivity reaching 10⁵ Ω, effectively eliminating surface charge accumulation.
Forms an anti-electric field at the coating-metal interface, shielding electron transfer and protecting the metal.
Superior high-temperature cathodic disbondment resistance.
Low melting temperature, high reactivity, high curing completion rate, and good mechanical properties.
Contains flame retardants, providing certain flame-retardant effects.
Powder Coating Performance Parameters
| Item | Quality Indicator | Test Method |
|---|---|---|
| Appearance | Uniform color, no lumps | Visual inspection |
| Density (g/cm³) | 1.3-1.7 | GB/T 4472 |
| Non-Volatile Content (%) | ≥ 99.4 | GB/T 6554 |
Cured Powder Coating Performance Parameters
| Test Item | Technical Indicator | Test Method |
|---|---|---|
| Appearance | Smooth surface, uniform color, no bubbles, cracks, or pinholes | Visual inspection |
| Adhesion (Grade) | 1-3 | CJ/T 120-2008 |
| Impact Resistance | No peeling, no cracking | CJ/T 120-2008 |
| Surface Resistivity (Ω·m) | ≤ 1×10⁶ (Ω·m) | GB/T 16906-97 |
| Abrasion Resistance (1000g, 1000 cycles) | ≤ 20g | GB/T 1768-1979 |
| Alcohol Burner Flame Test | Average flaming combustion time ≤ 3s | MT 181-88 |
| Maximum flaming combustion time ≤ 10s | ||
| Average non-flaming combustion time ≤ 20s | ||
| Maximum non-flaming combustion time ≤ 60s | ||
| Bending Test | No stripping or cracking of the inner coating | CJ/T 120-2008 |
| Flattening Test (Flattening ratio 4/5) | No cracking, no stripping | CJ/T 120-2008 |
Compliance Standard: MT 181-88
Application Fields:
Special anti-static and anti-corrosion coating for gas ventilation and drainage pipes in coal mines.
Application Processes:
Electrostatic spraying, dip coating, roll coating, etc.
Precautions:
The steel pipe surface should be free of oil and moisture; the surface treatment quality should reach Sa2 1/2 level (GB/T 8923); the anchor pattern depth should be 40-90 mm; dust and abrasives on the steel pipe surface should be blown clean. Preheating temperature should be controlled between 180-250°C and must not exceed 275°C.
The product should be stored in a well-ventilated, dry indoor environment with a temperature below 30°C, away from heat sources, corrosive chemicals, and chemical solvents, and protected from strong light exposure. The stacking height should not exceed four layers. Avoid long-term pressure and ensure the packaging box is sealed to prevent caking and moisture, which can affect fluidization performance.
To ensure thorough curing of the epoxy coating and better anti-corrosion performance, it is recommended to preheat the steel pipe surface to above 200°C to improve the curing completion rate.
If you're ready to take the next step, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
在线联系供应商
Other supplier products
 |
Functional Material Powder Coatings | Introduction 1. Targeted Solutions for Industrial Challenges Functional powder coatings address industry-specific needs where traditional coating... |
 |
Gray Series Powder Coating | Introduction We manufacture and export a full range of gray tone powder coatings, available in RAL, Pantone, or custom shades – shipped glob... |
 |
Wood Grain Texture Powder Coating | Introduction Key AttributesDetails Main Raw Material Epoxy Polyester Other Names Spray Paint State Powder coating Mod... |
 |
Aluminum Extrusion Powder Coating | Product Features Excellent Adhesion, Flexibility, Impact Resistance, and High Hardness: The coating provides superior durability and toughness. S... |
 |
Powder Coating Types & Materials-powder coating china | Forget wet paint. Try a dry finish. Powder coatings are excellent choices for that final film of color, texture or protection. According to the Pow... |
Same products
 |
Catalytic Converter Scrap Supplier, Catalytic Converter Scrap for Sale, , Catalytic Converter Scrap, Catalytic Scrap for Sale, Catalytic Scrap Supplier, Scrap Catalytic Supplier | 卖方: Trucont LLC | Trucont LLC 持续供应催化转化器废料，可立即装运发货。我们为全球各地的回收公司、金属加工商、汽车回收商、废料贸易商和买家提供优质的催化转化器废料。我们的催化转化器废料经过精心收集、分类... |
 |
Epimedium Extract | 卖方: Fruit Powder,Vegetable Powder | Product Name: Epimedium ExtractLatin Name: Epimedium Sagittatum Maxim.Specification: Icariin 5%, ... |
 |
Pumpkin Powder | 卖方: Fruit Powder,Vegetable Powder | Product Name: Pumpkin PowderLatin Name: Cucurbita pepo L.Used Part: FruitAppearance: yellow fine ... |
 |
Broccoli Powder | 卖方: Fruit Powder,Vegetable Powder | Product Name: Broccoli powder Latin Name: Brassica oleracea L.var.italic Planch. Used Part: Who... |
 |
Pomegranate Powder | 卖方: Fruit Powder,Vegetable Powder | Product Name: Pomegranate PowderLatin Name: Punica granatum linn.Used Part: Fruit juiceAppearance... |
