Architectural aluminum powder coating MT-D34

Product Description

MT-D34 is a series of durable powder coatings specially formulated for the use on architectural aluminum which conforms to the performance requirements of GB5237.4 specification. MT- D34 is designed to offer significantly high gloss retention and resistance to color change combined with maximum film integrity to ensure long term cosmetic and functional protection. MT-D34 powder coatings are available in a selected range of colors including pearlescent effects in gloss, satin and matte finishes. Fine and coarse textured are also available.

Powder Properties

Chemical Type	Polyester
Appearance	Smooth
Particle Size	Suitable for electrostatic spray
Specific Gravity	1.3 – 1.7 g/cm³
Gloss	45 – 55% (depending on color)
Storage	Dry, cool conditions (open boxes must be resealed)
Shelf Life	12 months below 25°C peak temperature 6 months below 30°C peak temperature
Stoving Conditions (at object temperature)	10 minutes at 200°C Failure to observe the curing conditions may cause differences in color, gloss, and/or the deterioration of the coating properties.

Mechanical Tests

Adhesion	GB/T 9286	Pass Gt0
Erichsen cupping	GB/T 9753	Pass, 5 mm no crack or detachment of film
Impact resistance	GB/T 20624.2	Pass, 50 InP Reverse, deformation no crack
Bend Test	GB/T 6742	Pass, 3 mm no crack

Pre-treatment

For maximum protection it is essential to pretreat components prior to the application of MT- D34. Aluminium components should receive the following pre-treatment in accordance of supplier’s recommendation.

Substrate

Aluminum – Multi-stage chrome chromate or chrome phosphate Galvanised.

Steel – Multi-stage zinc phosphate or chromate.

Steel – Multi-stage zinc or iron phosphate.

Application

MT-D34 powders can be applied by manual or automatic electrostatic spray equipment. It is recommended that for consistent application and appearance product be fluidized during application. Unused powder can be reclaimed using suitable equipment and recycled through the coating system.

If you're ready to take the next step, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.

Other supplier products

	High-Weatherability Powder Coating for Gas Pipelines	Introduction Product SegmentationApplication Fields High-Weatherability Powder Coating for Gas Pipelines Outdoor gas pipes ...
	New flame retardants STD-FR PVC ST	Introduction STD-FRPVCSTseriesisanewtypeofflameretardantcompoundedwithactivated environmentally friendly flame retardant and environmentally frien...
	Imitation Crystal-Swimming Wood Grain Powder	Introduction Imitation crystal-swimming wood grain powder is a specialized coating that replicates natural wood texture with an added crystalline,...
	ACMO Monomer / 4-Acryloylmorpholine	Introduction CAS No. 5117-12-4 Molecular Formula: C7H11NO Appearance: Colorless or pale yellow transparent liquid Content: 98%min Color: 30 AP...
	PVC Powder Coatings | B2B Solutions from China	Introduction We offer a full range of PVC (Polyvinyl Chloride) powder coatings, tailored for furniture, construction, electrical insulation, chemi...

供应产品

Same products

	5.4,4'-Oxydiphenol CAS 1965-09-9	卖方: Yufeng International Group Co., Ltd	Product Name: 4,4'-Oxydiphenol Synonyms: 4,4'-Dihydroxydiphenyl ether 4,4'-Oxydiphenol Bis(4-...
	1,1,2,2-Tetrachloroethane CAS 79-34-5	卖方: Yufeng International Group Co., Ltd	Product Name: 1, 1, 2, 2-Tetrachloroethane Synonyms: 79-34-5 s-Tetrachloroethane Acetylene te...
	3.Chlorotrifluoroethylene (CTFE) CAS 79-38-9	卖方: Yufeng International Group Co., Ltd	Synonyms: CHLOROTRIFLUOROETHYLENE 79-38-9 CTFE Chlorotrifluoroethene 1-Chloro-1,2,...
	2.1,1,2-Trichloroethane CAS 79-00-5	卖方: Yufeng International Group Co., Ltd	Product Name: 1, 1，2-Trichloroethane CAS: 79-00-5 Synonyms:79-00-5, Vinyltrichloride, beta-...
	1.1,1,2,2-Tetrachloroethane CAS 79-34-5	卖方: Yufeng International Group Co., Ltd	Product Description Product Name: 1, 1, 2, 2-Tetrachloroethane Synonyms: 79-34-5 s-Te...