Powder coating for aluminum profiles

Product description

This series of products is based on saturated hydroxyl polyester resin and TGIC curing agent as the main base materials, and is a thermosetting powder coating with excellent weather resistance designed for outdoor materials used in construction.

Product characteristics

High weather resistance, strong mechanical properties;

Excellent water boiling resistance, excellent corrosion resistance;

Good polishing, good construction adaptability and high powder coating rate;

Excellent resistance to excessive baking.

Special effects

Various textures, thermal transfer, metal, pearlescent effects and mixed colors, etc.

Application areas

Specially used for spraying of architectural aluminum alloy profiles.

Transportation packaging

Carton packaging, lined with two layers of polyvinyl chloride plastic bags, net weight of each box is 20kg. Non-hazardous items can be transported in various ways, but should be kept away from direct sunlight, moisture and heat, and contact with chemicals.

Hygiene and safety

Operators should wear dust masks during use to avoid inhaling dust and minimize long-term contact between skin and powder coating. Paint attached to the skin can be washed with soap.

Powder properties

Specific gravity	1.2~1.8g/cm³ (depending on the formula and color)
Particle size	Depending on the purpose, the standard type has an average particle size of 20~45 microns, less than 10 microns powder <8%, greater than 70 microns powder <20%
Volatile matter	<1%
Softening point	60~95℃ varies depending on the color and gloss
Storage stability	Polyester/TGIC powder coatings should be stored in a dry and ventilated room below 35℃, and avoid direct sunlight. If stored in an air-conditioned room, the powder must be stored at room temperature or the same (temperature) as the spraying equipment before use to avoid moisture. Under this condition, the powder can be stored stably for 12 months. If it exceeds the period, it must be re-tested. If the result meets the requirements, it can still be used. Note: For low-temperature curing types and powders with a gloss of less than 40% (60°), the storage temperature should be below 30℃.

Other supplier products

	Luggage rack powder coating	Characteristics of powder coatings ”It does not contain toxic, solvent free, or volatile toxic substances, so it does not have toxic”&...
	Electrical Insulation Powder Coatings	Feature: Granularity 100~200μm>=70% 260μm<=0.5% External appearance flat and smooth, slight orange peel is allow...
	Profile powder	Introduction Accurate selection of powder has always been a problem for the powder industry. To solve this problem, we name the powder according t...
	Metallic flat matte MT-629/94737	Introduction No. MT-629/94737 Color Metallic gray Surface Metallic flat matte System Super weather-resistant polyeste...
	Blue Matte Powder Coating	Introduction AttributeDetails CAS No. 53808-41-6 Place of Origin China Main Raw Material EPOXY Usage Furniture P...

供应产品

Same products

	Easy-cleaning Silicone-Modified Waterborne UV Resin	卖方: Guangzhou Human New Material Science and Technology Co., Ltd	LUV533 is a high-performance, silicone-modified hexafunctional waterborne UV resinengineered to d...
	Water-based Soft-Touch Resin for Consumer Electronics	卖方: Guangzhou Human New Material Science and Technology Co., Ltd	Water-based Soft-Touch Resinis an advanced coating material formulated to deliver a luxurious, ve...
	Conformal Coatings	卖方: Guangzhou Human New Material Science and Technology Co., Ltd	The conformal coatingsprovide good adhesion to metal, PCB and other substrates after curing at ro...
	Metalized & Laser Transfer coating	卖方: Guangzhou Human New Material Science and Technology Co., Ltd	Metallized and laser transfer coatingsare designed with sustainability in mind, ensuring minimal ...
	Hydrophilic coatings for Air Conditioner	卖方: Guangzhou Human New Material Science and Technology Co., Ltd	A water-based coating combination applied on the surface of aluminum foil, which forms a layer wi...