Architectural aluminum powder coating MT-D34

Product Description

MT-D34 is a series of durable powder coatings specially formulated for the use on architectural aluminum which conforms to the performance requirements of GB5237.4 specification. MT- D34 is designed to offer significantly high gloss retention and resistance to color change combined with maximum film integrity to ensure long term cosmetic and functional protection. MT-D34 powder coatings are available in a selected range of colors including pearlescent effects in gloss, satin and matte finishes. Fine and coarse textured are also available.

Powder Properties

Chemical Type	Polyester
Appearance	Smooth
Particle Size	Suitable for electrostatic spray
Specific Gravity	1.3 – 1.7 g/cm³
Gloss	45 – 55% (depending on color)
Storage	Dry, cool conditions (open boxes must be resealed)
Shelf Life	12 months below 25°C peak temperature 6 months below 30°C peak temperature
Stoving Conditions (at object temperature)	10 minutes at 200°C Failure to observe the curing conditions may cause differences in color, gloss, and/or the deterioration of the coating properties.

Mechanical Tests

Adhesion	GB/T 9286	Pass Gt0
Erichsen cupping	GB/T 9753	Pass, 5 mm no crack or detachment of film
Impact resistance	GB/T 20624.2	Pass, 50 InP Reverse, deformation no crack
Bend Test	GB/T 6742	Pass, 3 mm no crack

Pre-treatment

For maximum protection it is essential to pretreat components prior to the application of MT- D34. Aluminium components should receive the following pre-treatment in accordance of supplier’s recommendation.

Substrate

Aluminum – Multi-stage chrome chromate or chrome phosphate Galvanised.

Steel – Multi-stage zinc phosphate or chromate.

Steel – Multi-stage zinc or iron phosphate.

Application

MT-D34 powders can be applied by manual or automatic electrostatic spray equipment. It is recommended that for consistent application and appearance product be fluidized during application. Unused powder can be reclaimed using suitable equipment and recycled through the coating system.

If you're ready to take the next step, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.

Other supplier products

	Basecoat powder coating	Product Description MT-A2204 basecoat comes in an array of metallic finishes, which offer enhanced exterior durability with the application of a s...
	Metallic flat matte powder Coating	Introduction Brand STD Color Metallic gray Surface Metallic flat matte System Super weather-resistant polyester Scop...
	PVDF super weather-resistant fluorocarbon powder	Introduction 30-year warranty for PVDF super weather-resistant fluorocarbon powder Introduction PVDF (Polyvinylidene Fluoride) fluorocarbon powd...
	Medical Powder Coating	Introduction We are a Chinese factory with over 20 years of export experience, supplying premium coatings to hospitals, medical equipment manufact...
	Powder coating series for vehicle compartment/powder coating with SGS report	With the development of environmental protection and energy conservation, the central environmental protection department and local governments hav...

供应产品

Same products

	Trimellitic anhydride 97%	卖方: Yufeng International Group Co., Ltd	Trimellitic anhydrideis a 2-benzofuran compound having oxo groups at the 1- and 3-positions and a...
	Isobutyric Anhydride CAS 97-72-3	卖方: Yufeng International Group Co., Ltd	Product Name: Isobutyric Anhydride CAS No.: 97-72-3 Purity: 99% Molecular Formula: C6H10O3 Mo...
	Isobutyric Acid CAS 79-31-2	卖方: Yufeng International Group Co., Ltd	Product Name:ISOBUTYRIC ACID Synonyms: 2-Methylpropanoic acid 79-31-2 Isobutanoic acid 2-Met...
	2-Amino-2-methyl-1-propanol（AMP）CAS：124-68-5	卖方: Yufeng International Group Co., Ltd	AtYufeng, a trusted 2-Amino-2-methyl-1-propanol Factory & Supplier, we prioritize quality and...
	Dimethyl sulfoxide (DMSO) CAS: 67-68-5	卖方: Yufeng International Group Co., Ltd	Yufengis one of the leading dimethyl sulfoxide suppliers and also a professional such manufacture...