Powder coating for aluminum profiles
Product description
This series of products is based on saturated hydroxyl polyester resin and TGIC curing agent as the main base materials, and is a thermosetting powder coating with excellent weather resistance designed for outdoor materials used in construction.
Product characteristics
High weather resistance, strong mechanical properties;
Excellent water boiling resistance, excellent corrosion resistance;
Good polishing, good construction adaptability and high powder coating rate;
Excellent resistance to excessive baking.
Special effects
Various textures, thermal transfer, metal, pearlescent effects and mixed colors, etc.
Application areas
Specially used for spraying of architectural aluminum alloy profiles.
Transportation packaging
Carton packaging, lined with two layers of polyvinyl chloride plastic bags, net weight of each box is 20kg. Non-hazardous items can be transported in various ways, but should be kept away from direct sunlight, moisture and heat, and contact with chemicals.
Hygiene and safety
Operators should wear dust masks during use to avoid inhaling dust and minimize long-term contact between skin and powder coating. Paint attached to the skin can be washed with soap.
Powder properties
| Specific gravity | 1.2~1.8g/cm³ (depending on the formula and color) |
| Particle size | Depending on the purpose, the standard type has an average particle size of 20~45 microns, less than 10 microns powder <8%, greater than 70 microns powder <20% |
| Volatile matter | <1% |
| Softening point | 60~95℃ varies depending on the color and gloss |
| Storage stability | Polyester/TGIC powder coatings should be stored in a dry and ventilated room below 35℃, and avoid direct sunlight. If stored in an air-conditioned room, the powder must be stored at room temperature or the same (temperature) as the spraying equipment before use to avoid moisture. Under this condition, the powder can be stored stably for 12 months. If it exceeds the period, it must be re-tested. If the result meets the requirements, it can still be used. Note: For low-temperature curing types and powders with a gloss of less than 40% (60°), the storage temperature should be below 30℃. |
Coating properties
| Test items | Inspection standard or method | Inspection index |
| Appearance | Visual inspection | Various board surface effects |
| Impact | GB/T 1732 | ≥50Kg*cm |
| Bending | GB/T 6742 | ≤2mm |
| Adhesion | GB/T 9753 | ≥6mm |
| Hardness | GB/T 9286 | Level 0 |
| Moisture and heat resistance | GB/T 6739 | ≥H |
| Boiling water resistance | GB/T 1740 | 500h No abnormality |
| Acetic acid spray resistance | GB/T 6682 | 2h No shedding or wrinkling, extremely dispersed and tiny bubbles are allowed, and slight color changes are allowed |
| Artificial weathering resistance | GB/T 1771 | 1000h No blistering or shedding of the coating, and the unilateral corrosion of the line does not exceed 4mm |
| Solvent resistance (hydrochloric acid) | GB/T 1865 | 1000h Color difference △E≤5; light retention rate ≥50% |
| Spraying | This series of products are suitable for the following spraying methods: corona electrostatic spraying; friction electrostatic spraying; electrostatic fluidized bed spraying; fluidized bed hot dip coating. | |
| Coating thickness: Use between 40~150 microns, recommended film thickness is 50~80 microns. | ||
| Curing conditions | 200℃/15 minutes is recommended, and it can also be designed according to user needs. | |
If you're ready to take the next step, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
在线联系供应商
Other supplier products
 |
Cresyl diphenyl phosphate (CDP) | Product Details Cresyldiphenylphosphate(CDP) Alias:Crelyl diphenyl phosphate; Phenyl methyl phenyl phosphate; Flame retardant ... |
 |
Camo Powder Coating – powder coat colour chart | We are a professional powder coating manufacturer in China, specializing in custom camouflage powder coatings for diverse industries. With advanced... |
 |
Patterned Powder Coating | Introduction We are a professional powder coating manufacturer in China, specializing in custom patterned powder coatings for industrial and decor... |
 |
Outdoor 10-year warranty high weather-resistant wood grain powder | Introduction Complete range of products with rich colors. Orders can be placed directly according to PANTONG / RAL / architectural color cards. ... |
 |
Instrument powder Coating | Introduction It is made of polyester resin and epoxy resin as the main base materials, and has the excellent decorative, mechanical properties and... |
Same products
 |
Hot Melt Adhesive for Vacuum Insulation Panels | 卖方: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Vacuum Insulation Panels Supply & Technical Support Capabilities ... |
 |
Hot Melt Adhesive for Packaging | 卖方: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Packaging Bond Strength & Durability: Hot melt adhesives provide i... |
 |
Hot Melt Adhesive for Hygiene Products | 卖方: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Hygiene Products refers to thermoplastic pressure‑sensitive adhesives ... |
 |
LSAW Steel Pipe & Tube | 卖方: HEBEI TIRICO PIPELINE CO.,LTD | LSAW Steel Pipe & Tube , or Longitudinal Submerged Arc-Welding Pipe (also known as SAWL ... |
 |
Anti-Corrosion Steel Pipe & Tube | 卖方: HEBEI TIRICO PIPELINE CO.,LTD | Anti-Corrosion Steel Pipe & Tube Anti-Corrosion Steel Pipe & Tube What Is an Anti... |
