.

Powder coating primer containing zinc

Product Description

MT-PZ is a powder coating primer containing zinc which is designed to give enhanced corrosion protection of mild steel. This duplex system combines cathodic protection and barrier effect. Dedicated to steel protection with a surface pre-treatment obtained by grit/shot blasting. MT-PZ is based on a specific epoxy zinc rich formulation that brings conductivity to enable the cathodic protection. MT- PZ includes a specific anticorrosive function which improves the protection in case of scratch. Qualisteelcoat approval: Base Material: Steel PE-0097 2 coat system – up to C4-H, mechanical pretreatment.

Powder Properties

Chemical type Thermosetting epoxy
Appearance Smooth
Gloss level(60°) 45-65units
Color Grey (about RAL7012)
Recommended Film Thickness (µm) 70 – 120 µm
Density (g/cm3) 2.1g/cm³
Application Electrostatic
Storage Under dry, cool (≤ 30°C) conditions
Shelf life 12monthsbelow25°C

Pretreatment

Surface preparation depends upon the metal, the type of surface, its conditions and the required performance. See our recommendation for pretreatment to be used with MT-PZ.

Substrate Mechanical pretreatment Chemical pretreatment
Mild steel Grit Blasting Sa 2.5 in accordance with ISO NF EN 8501-1. Roughness: Rz 35 60 µm / Ra 6-12 µm Banned
Cast steel
Electro Zinc steel Banned
Hot dip galvanized steel
Zinc sprayed (gas flame/electrical deposition)

Application

MT-PZ is suitable for corona electrostatic spraying. Tribo application is not recommended.

Application settings Fluidizing air pressure: 1.5kg/cm2 initially then 1kg/cm2

Transport air pressure: 0.5 to 0.8 kg/cm

Recommended voltage: 65 to 70kV

Curing limits Primer should be cured, or at least gelled, using the recommended curing schedules, before application of the topcoat. The object temperature must not be below 110°C or above 180°C.

The primer should be cured in a convection oven, optionally with infra-red heaters, with air temperature not exceeding 180°C.

Recommended film thickness 70-120 µm A good protection is linked with the recommended film thickness.
Recycling Trials, with suitable recycling equipment, must be carried out before commencing production. Attention should be paid to the ratio of new powder, a minimum of 70% must be used. Gun nozzles must be cleaned every 30 minutes.

在线联系供应商

至: Standard International Group (HK) Limited
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Weather-resistant powder coatings
Weather-resistant powder coatings Product description: This series of products uses saturated polyester resin and acrylic resin as the main base materials to make thermosetting pow...
Powder coatings for Automotive trim parts MT-A2201 /MT-YZ108GF
Powder coatings for Automotive trim parts MT-A2201 /MT-YZ108GF Product Description MT- A2201 clearcoats can be used for pillars and appliqués, roof racks, grille guards, bumpers, and mirror housings, al...
Artistic Powder Coating
Artistic Powder Coating Introduction We are a leading powder coating manufacturer specializing in Artistic Powder Coating with a focus on delivering rich decorative effec...
Epoxy Anti-Corrosion Powder Coating for Firefighting Steel Pipes
Epoxy Anti-Corrosion Powder Coating for Firefighting Steel Pipes Surface Finish Options Overview Product Introduction: This product is formulated using linear phenolic epoxy resin, polyurethane-modified...
Super weather-resistant polyester powder coating
Super weather-resistant polyester powder coating Product series Surface effects: flat high gloss, flat flat gloss, flat matte, sand grain, wrinkles, etc. Certification: Some products have passed...
供应产品

Same products

Catalytic Converter Scrap Supplier, Catalytic Converter Scrap for Sale, , Catalytic Converter Scrap, Catalytic Scrap for Sale, Catalytic Scrap Supplier, Scrap Catalytic Supplier
Catalytic Converter Scrap Supplier, Catalytic Converter Scrap for Sale, , Catalytic Converter Scrap, Catalytic Scrap for Sale, Catalytic Scrap Supplier, Scrap Catalytic Supplier 卖方: Trucont LLC Trucont LLC 持续供应催化转化器废料,可立即装运发货。我们为全球各地的回收公司、金属加工商、汽车回收商、废料贸易商和买家提供优质的催化转化器废料。我们的催化转化器废料经过精心收集、分类...
Epimedium Extract
Epimedium Extract 卖方: Fruit Powder,Vegetable Powder Product Name: Epimedium ExtractLatin Name: Epimedium Sagittatum Maxim.Specification: Icariin 5%, ...
Pumpkin Powder
Pumpkin Powder 卖方: Fruit Powder,Vegetable Powder Product Name: Pumpkin PowderLatin Name: Cucurbita pepo L.Used Part: FruitAppearance: yellow fine ...
Broccoli Powder
Broccoli Powder 卖方: Fruit Powder,Vegetable Powder Product Name: Broccoli powder Latin Name: Brassica oleracea L.var.italic Planch. Used Part: Who...
Pomegranate Powder
Pomegranate Powder 卖方: Fruit Powder,Vegetable Powder Product Name: Pomegranate PowderLatin Name: Punica granatum linn.Used Part: Fruit juiceAppearance...