Antistatic powder coating
Introduction:
Made of antistatic materials, suitable for indoor and outdoor environments
Features:
The volume resistivity of the coating is as low as 106-1010 Ω· cm, which prevents the accumulation of static electricity on the surface of the equipment and protects the equipment.
It can resist static electricity for a long time.
Use:Suitable for coating and protection of the surface of electrical appliances and equipment to reduce static electricity accumulation.
Application parameters:
Curing time:200℃×10–15 minutes
Spraying method:High voltage electrostatic spraying 60-80 KV
Recommended film thickness:60-80 um
Physical properties:
| Item | Instrument | Standard | Test method |
| Pencil hardness | Pencil hardness tester | ≥ H | GB/6739 |
| Impact resistance | Impact tester | ≥ 50 kg.cm | GB/T 1732 |
| Bending resistance | Bending tester | ≤ 2mm | GB/T 6742 |
| Adhesion | 100 grid test | Level 0 | GB/T 9286 |
| Cup protrusion | Cup protrusion tester | ≥ 6 mm | GB/T9753 |
| Chemical properties: | |||
| Salt spray resistance | ≥ 500 Hs | ≥ 9 levels | GB/T 1771 |
| Moisture and heat resistance | ≥ 1000 Hs | Slight gloss loss | GB/T 1740 |
| Weather resistance (outdoor products) | Artificial accelerated aging QUV-B313 240h | ≥ 3 levels | GB/T 1865 |
The above tests all use 0.8mm degreased and derusted cold-rolled steel plates, with a coating thickness of 40 to 80um. The performance indicators of the coating will vary slightly with the gloss.
This product does not contain heavy metals such as arsenic, selenium, lead, hexavalent chromium, mercury, antimony, cadmium, etc., and meets RoHS requirements.
Storage conditions:Store in a dry, ventilated room at around 25°C, avoid direct sunlight. Under this condition, the powder can be stored for 6-12 months. If it is overdue, it can be re-tested and can still be used if the results meet the requirements.
Note:The test indicators mentioned in this report are all data obtained from laboratory tests and are for reference only, not as a performance commitment for product application. The results may vary depending on environmental factors and other conditions.
在线联系供应商
Other supplier products
 |
Acrylic transparent powder coating | 1. Product Overview This product takes polyester resin and epoxy resin as the main base materials, integrating the excellent decorative performa... |
 |
560℃ High Gloss Mirror Chrome and Metallic Bonding Powder Coating | Feature — The metallic pigment can be better melt with the bottom powder and will not jam the spray gun while spraying. — Strong adhe... |
 |
Fitness Equipment Powder | Introduction It is made of polyester resin and epoxy resin as the main base materials, and has the excellent decorative, mechanical properties and... |
 |
Metallic flat high gloss MT-049/98102 | Introduction No. MT-049/98102 Color Metallic color Surface Metallic flat high gloss System Polyester Scope of ap... |
 |
Medium Cure Powder Coating | We are a leading powder coating manufacturer specializing in Medium Cure Powder Coating that cures at moderate temperatures, offering an optimal ba... |
Same products
 |
High Concentration Plastic Color Masterbatch Factory Direct Supply | 卖方: 861445 | We are a professional color masterbatch manufacturer with years of R&D experience in plastic ... |
 |
Acid Ink Blue G Factory | 卖方: TIANJIN LEADING IMPORT & EXPORT CO., LTD | Acid Ink Blue G Factory 【Application of Acid Ink Blue G 】 mainly used for making blue or ... |
 |
Acid Black ATT Factory | 卖方: TIANJIN LEADING IMPORT & EXPORT CO., LTD | Acid Black ATT Factory 【What’s Acid Black ATT】 is made of acid black 10B and acid o... |
 |
Acid Black 10B Factory | 卖方: TIANJIN LEADING IMPORT & EXPORT CO., LTD | Acid Black 10B Factory is mainly suitable for dyeing and printing wool ,silk and nylon fabri... |
 |
Sulphur Dyes | 卖方: TIANJIN LEADING IMPORT & EXPORT CO., LTD | Sulphur Dyes BuyDye supplies a range of sulphur dyes for cotton-based textile dyeing, includ... |
