Powder coatings for automobile bodies MT-A500 series
Product overview:
Weather-resistant pure polyester powder coatings designed for automobile bodies.
Use:Suitable for spraying of body parts of various models.
Coating characteristics:
-Excellent leveling
-Excellent UV and salt spray resistance
-Good easy-to-clean function
Application parameters:
Curing time: 180P~200cCx10~15 minutes
Spraying method: high-voltage electrostatic spraying 60~80KV
Recommended film thickness: 60-150 um
| Project | Instrument | Judgment standard | Test standard |
| Adhesion | Single-edged knife, tape | Grade 0 | GB/T 9286 ISO 2409 ASTM D 3359 |
| Impact resistance | Impact tester | 50 kg.cm (8mm diameter)
2.5Nm (16mm diameter) (20mm diameter) |
GB/T 1732 ASTM D 2794 ISO 6272 |
| Coating hardness | Hardness tester | M 1H | GB/T6739 ASTM D 3363 |
| Alkali resistance | 0.1N NaOH, beaker | After 48 hours, the coating has no blistering,shedding, rusting, or spots | GB/T 9274 |
| Acid resistance | 0.1N sulfuric acid, beaker | M24H, coating does not become mushy | GB/T9274 |
| Salt spray resistance | NSS salt spray chamber | &500H, rust and blister v2mm | GGB/T 1771 ASTMB-117 ISO 7253 |
| Moisture and heat resistance | Constant temperature and humidity chamber | M 1000H, slight discoloration is allowed,no blistering, rusting, or shedding | GB/T 1740 ISO 6270 |
| Weather resistance | Artificial accelerated aging chamber | QUV-B313 500H M 3 grade | GB/T1865 ISO 11341 |
| Motor oil resistance | L—E10# | No surface change after 24h immersion | GB/T 1734 |
| Gasoline resistance | 120# solvent oil | No surface change after immersion for 4 hours | GB/T 1734 |
| Stone impact resistance | Stone impact tester | W3 | SAEJ400 |
| Water resistance | Steaming and water storage | 20 cycles allow coarsening, but no blistering | GB/T 1733
ASTM D 2247 |
•The above tests all use 0.8mm degreased and derusted cold-rolled steel plates, with a coating thickness of 60~80um. The performance indicators of the coating will vary slightly with different gloss.
Environmental requirements:This product does not contain heavy metals such as quartz, selenium, lead, hexavalent, mercury, dart, cadmium, etc., and fully complies with RoHS 2Q environmental protection requirements.
Note:We will provide complete powder coating consultation and customized application solutions based on the actual needs of each customer. The test indicators mentioned in this report are all data obtained from laboratory testing and are for reference only, not as performance commitments for product applications. The results may vary depending on environmental factors and other conditions.
在线联系供应商
Other supplier products
 |
Architectural aluminum powder coating MT-D34 | Product Description MT-D34 is a series of durable powder coatings specially formulated for the use on architectural aluminum which conforms to the... |
 |
High Weather-Resistant Acrylic Resin Powder Coating | 1. Technical Product Classification Our acrylic coatings are categorized by chemical composition and functional performance to suit various engine... |
 |
PVDF fluorocarbon coating | Product Introduction Used for aluminum substrate surfaces such as building curtain walls, doors and windows, ceilings, roofs, and storefronts. Te... |
 |
Titanium dioxide R-706 | Product Description Titanium dioxide R-706 is a universal rutile titanium dioxide pigment, manufactured by the chloride process, that is designed ... |
 |
High temperature-resistant powder coating | Introduction As the application scope of powder coating continues to expand, some extreme environments have put forward higher requirements for po... |
Same products
 |
Hot Melt Adhesive for Vacuum Insulation Panels | 卖方: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Vacuum Insulation Panels Supply & Technical Support Capabilities ... |
 |
Hot Melt Adhesive for Packaging | 卖方: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Packaging Bond Strength & Durability: Hot melt adhesives provide i... |
 |
Hot Melt Adhesive for Hygiene Products | 卖方: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Hygiene Products refers to thermoplastic pressure‑sensitive adhesives ... |
 |
LSAW Steel Pipe & Tube | 卖方: HEBEI TIRICO PIPELINE CO.,LTD | LSAW Steel Pipe & Tube , or Longitudinal Submerged Arc-Welding Pipe (also known as SAWL ... |
 |
Anti-Corrosion Steel Pipe & Tube | 卖方: HEBEI TIRICO PIPELINE CO.,LTD | Anti-Corrosion Steel Pipe & Tube Anti-Corrosion Steel Pipe & Tube What Is an Anti... |
