560℃ High Gloss Mirror Chrome and Metallic Bonding Powder Coating
Feature
— The metallic pigment can be better melt with the bottom powder and will not jam the spray gun while spraying.
— Strong adhesion between the metal powder and the base material. The powder is hard to fall off while spraying.
— Good compatibility for the the spraying effect between recovery powder coating and new powder.
— The metallic powder is hard to fall off and be oxided and there is no fingerprint problem.
Density:
1.2~1.8g/cm3( Ingredient and color demand)
Particle Size:
Purpose demands, standard granularity is 35-40 um, <10um powder <10%, >100um powder <0.5%.
Storage stability:
Bonding Metallic Powder Coatings should be stored below 35°C in a dry and well ventilated place away from source of heat, ignition and direct sunlight. If stored in an air-conditioner room, in order to avoid damp again, before using the powder, the powder should be kept at the room temperature or at the same temperature with the spray equipment. Under such condition, the powder can be stored stably for 12 months.
Extended, retest will be required. If the testing result meets the requirement, the powder can still be used.
Note:For the low temperature curing powder with the gloss below 40%(60°),the better stored temperature is below 30℃.
Field of Application:
Bonding Metallic Powder Coatings refers to all kinds of powder coatings which contains metallic pigments (such as: copper and golden powder, silver and aluminum powder, pearlescent pigments ). Because of its colorful decorative coating effect, this series of products is very suitable for the spraying of fitness equipment, furniture and cars etc.
Special Effects:
All kinds of wrinkle and compound colors etc. As for the use of special surface coating, please refer to the usage guide of our company
If you're ready to take the next step, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
在线联系供应商
Other supplier products
 |
Sand grain metal MT-049/77578 | Introduction No. MT-049/77578 Color Xuanyou (grey) Surface Sand grain metal System Polyester Scope of applicatio... |
 |
Epoxy Anti-Corrosion Powder Coating for Pipeline Internal Coating | Product Introduction:This product is formulated using special epoxy resin and functional curing agents. It features high reactivity, strong adhesio... |
 |
Low Temperature Powder Coating Series | Key Features & Specifications FeatureSpecification / Benefit Low Temperature Curing 120°C × 20–30 mincuring proces... |
 |
Conductive Powder Coating | Product Features: Dissipates static electricity to protect the normal operation of low-voltage or micro-electronic components. Prevents the occur... |
 |
Polyester Powder Coating | Product Introduction:This series of products is a thermosetting powder coating made from a mixture of saturated polyester resin, corresponding curi... |
Same products
 |
Easy-cleaning Silicone-Modified Waterborne UV Resin | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | LUV533 is a high-performance, silicone-modified hexafunctional waterborne UV resinengineered to d... |
 |
Water-based Soft-Touch Resin for Consumer Electronics | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | Water-based Soft-Touch Resinis an advanced coating material formulated to deliver a luxurious, ve... |
 |
Conformal Coatings | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | The conformal coatingsprovide good adhesion to metal, PCB and other substrates after curing at ro... |
 |
Metalized & Laser Transfer coating | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | Metallized and laser transfer coatingsare designed with sustainability in mind, ensuring minimal ... |
 |
Hydrophilic coatings for Air Conditioner | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | A water-based coating combination applied on the surface of aluminum foil, which forms a layer wi... |
