Powder coating for elevators
Transportation packaging
Carton packaging, lined with two layers of polyvinyl chloride plastic bags, net weight of each box is 20kg. Non-dangerous goods can be transported in various ways, but should be kept away from direct sunlight, moisture and heat, and contact with chemicals.
Application areas
Applicable to elevator accessories and devices with high decorative requirements.
Health and safety
Operators should wear dust masks during use to avoid inhaling dust, and minimize long-term contact between skin and powder coating. Paint attached to the skin can be washed with soap.
Coating properties
| Test items | Inspection indicators | Inspection standard or method |
| Appearance | Visual | The coating is uniform, without burrs, bubbles and other defects |
| Film thickness | GB/T 1764 | ≥60μm |
| Adhesion | GB/T 9286 | Level 0 |
| Impact | GB/T1732 | ≥50Kg·cm |
| Neutral salt spray resistance | GB/T1771 | 500h; At the scribe line: unidirectional rust ≤2.0mm; Unscribe line area: no abnormality |
| Acid resistance | GB/T 9274 | 300h; No smearing, no spots, slight discoloration is allowed |
| Alkali resistance | GB/T 9274 | 200h; No smearing, slight discoloration is allowed |
| Bending | GB/T 6742 | ≤3mm |
| Moisture and heat resistance | GB/T 1740 | 500h No abnormality |
| Alcohol wiping resistance | GB/T23989 | Wipe back and forth 50 times without obvious discoloration or bubbling |
| Curing conditions | 180℃/15min | |
在线联系供应商
Other supplier products
 |
PVF oil pipe coating | Product Introduction Used for automobile oil pipes. PVF coating characteristics: (PVF) coating is the abbreviation of polyvinyl fluoride (Polyvi... |
 |
Thermosetting Decorative Powder Coating | I. Product Introduction Thermosetting decorative powder coating is a new generation of metal surface treatment technology. It forms a wear-resista... |
 |
Coating for Busbar by Electrostatic Spray Application | Product Description MT-EL-HLF59R is a one part, 100 % solids, epoxy powder coating for insulation of wire and busbars. Designed for electrostatic ... |
 |
Automotive components powder coatings MT-A1230 | Product Description MT-A1230 series covers a wide range of powder coatings specifically designed to meet the extreme demands of automotive compone... |
 |
Amorphous aluminium silicate with a high degree of whiteness SODASIL P95 | Introduction CAS:1344-00-9 EINECS:215-684-8 Nature Amorphous aluminium and sodium silicate obtained by precipitation in an aqueous medium. Tec... |
Same products
 |
Hot Melt Adhesive for Vacuum Insulation Panels | 卖方: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Vacuum Insulation Panels Supply & Technical Support Capabilities ... |
 |
Hot Melt Adhesive for Packaging | 卖方: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Packaging Bond Strength & Durability: Hot melt adhesives provide i... |
 |
Hot Melt Adhesive for Hygiene Products | 卖方: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Hygiene Products refers to thermoplastic pressure‑sensitive adhesives ... |
 |
LSAW Steel Pipe & Tube | 卖方: HEBEI TIRICO PIPELINE CO.,LTD | LSAW Steel Pipe & Tube , or Longitudinal Submerged Arc-Welding Pipe (also known as SAWL ... |
 |
Anti-Corrosion Steel Pipe & Tube | 卖方: HEBEI TIRICO PIPELINE CO.,LTD | Anti-Corrosion Steel Pipe & Tube Anti-Corrosion Steel Pipe & Tube What Is an Anti... |
