Antistatic powder coating
Application parameters:
Curing time:200℃×10–15 minutes
Spraying method:High voltage electrostatic spraying 60-80 KV
Recommended film thickness:60-80 um
Physical properties:
| Item | Instrument | Standard | Test method |
| Pencil hardness | Pencil hardness tester | ≥ H | GB/6739 |
| Impact resistance | Impact tester | ≥ 50 kg.cm | GB/T 1732 |
| Bending resistance | Bending tester | ≤ 2mm | GB/T 6742 |
| Adhesion | 100 grid test | Level 0 | GB/T 9286 |
| Cup protrusion | Cup protrusion tester | ≥ 6 mm | GB/T9753 |
| Chemical properties: | |||
| Salt spray resistance | ≥ 500 Hs | ≥ 9 levels | GB/T 1771 |
| Moisture and heat resistance | ≥ 1000 Hs | Slight gloss loss | GB/T 1740 |
| Weather resistance (outdoor products) | Artificial accelerated aging QUV-B313 240h | ≥ 3 levels | GB/T 1865 |
The above tests all use 0.8mm degreased and derusted cold-rolled steel plates, with a coating thickness of 40 to 80um. The performance indicators of the coating will vary slightly with the gloss.
This product does not contain heavy metals such as arsenic, selenium, lead, hexavalent chromium, mercury, antimony, cadmium, etc., and meets RoHS requirements.
Storage conditions:Store in a dry, ventilated room at around 25°C, avoid direct sunlight. Under this condition, the powder can be stored for 6-12 months. If it is overdue, it can be re-tested and can still be used if the results meet the requirements.
Note:The test indicators mentioned in this report are all data obtained from laboratory tests and are for reference only, not as a performance commitment for product application. The results may vary depending on environmental factors and other conditions.
在线联系供应商
Other supplier products
| Acrylic Powder Coatings | Introduction Acrylic powder coatings are widely used in industrial, architectural, and decorative applications due to their high gloss, durability... | |
| Classic Light Luxury Series Colors Powder Coating/powder coating in | With vibrant and diverse strokes, it sketches the trends shaping contemporary design. This is not merely about choosing colors—it is an explo... | |
| FEVE fluorocarbon powder coating | Introduction FEVE (Fluoroethylene Vinyl Ether) fluorocarbon powder coating represents a breakthrough in high-performance protective finishes. Comb... | |
| Low Temp Cure&Environment friendly Polyester Powder Coatings | Feature: -Good adhesion and good mechanical properties -Good flowing and glossy -Good chemical resistance and corrosion resistance -Over 120um ... | |
| Powder Coating Manufacturer – High-Quality | Introduction Our Powder coatings are adapted for a range of applications and specially tailored to the individual requirements of our customers. O... |
Same products
| Easy-cleaning Silicone-Modified Waterborne UV Resin | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | LUV533 is a high-performance, silicone-modified hexafunctional waterborne UV resinengineered to d... | |
| Water-based Soft-Touch Resin for Consumer Electronics | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | Water-based Soft-Touch Resinis an advanced coating material formulated to deliver a luxurious, ve... | |
| Conformal Coatings | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | The conformal coatingsprovide good adhesion to metal, PCB and other substrates after curing at ro... | |
| Metalized & Laser Transfer coating | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | Metallized and laser transfer coatingsare designed with sustainability in mind, ensuring minimal ... | |
| Hydrophilic coatings for Air Conditioner | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | A water-based coating combination applied on the surface of aluminum foil, which forms a layer wi... |
















